[ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9

[qwep1]

Please add support for mining BEAM on NiceHash.

NiceHash requires a change in stratum protocol for equihash 150,5. Job message contains additional parameter "nonceprefix", which follows the same rules as "nonceprefix" field in the login response.

Protocol specifications:
https://github.com/nicehash/Specifications/blob/master/Beam_NiceHash_v1.0.txt

After the required change, Bminer could be added to NiceHashMiner Legacy - currently used by more than 70k miners.

again here is deer

[1714884928]

1714884928

[1714884928]

1714884928

[erdnapa]

What happen to my GTX 1080ti I'm getting around 3.53 fixed mining almost 8 hours but I got huge hashrate drop almost 50%?

What happen? The gtx 1080ti is in GPU 0?

this happened to one of my 3 card (1080ti) rig, using gminer 1.23, other 3 card rigs works fine..

i put the card in 2 card rig, the card now mines at ~6.9, maybe due to cooler area i placed it in...i noticed that although the gpu core is lower in temps compared to the other 2 1080 ti it simply throttles down from ~6.9 to 3.6 after a few hours...leaving it for now since it is doing ~6.9 in the 2 card rig, will investigate in the future..

i'm suspecting it maybe is throttling down due to heating of the VRMs...happend to one of my 390s back then, don't know if 1080 ti do this too...notice the power is ~240+ watts, that's heavy on the VRMs

edit: it still go down to ~3.7 in the 2 card rig..i think it is a card issue

Celeron? You may be CPU bound. Otherwise lower your power level to 70% or so.

[4ward]

Nicehash added Beam, but currently version isnt working

Can you please add support:
https://github.com/nicehash/Specifications/blob/master/Beam_NiceHash_v1.0.txt


EDIT.
Apologies for re-post )

[topteam]

how i can disable api?
-api 0 return error
and please reduce cpu usage on C29, back to the v13.2.0

[arielbit]

What happen to my GTX 1080ti I'm getting around 3.53 fixed mining almost 8 hours but I got huge hashrate drop almost 50%?

What happen? The gtx 1080ti is in GPU 0?

this happened to one of my 3 card (1080ti) rig, using gminer 1.23, other 3 card rigs works fine..

i put the card in 2 card rig, the card now mines at ~6.9, maybe due to cooler area i placed it in...i noticed that although the gpu core is lower in temps compared to the other 2 1080 ti it simply throttles down from ~6.9 to 3.6 after a few hours...leaving it for now since it is doing ~6.9 in the 2 card rig, will investigate in the future..

i'm suspecting it maybe is throttling down due to heating of the VRMs...happend to one of my 390s back then, don't know if 1080 ti do this too...notice the power is ~240+ watts, that's heavy on the VRMs

edit: it still go down to ~3.7 in the 2 card rig..i think it is a card issue

Celeron? You may be CPU bound. Otherwise lower your power level to 70% or so.

socket 775 xeon x3220 rig where i found it, i have same rig with no issues and i have even a lesser q8400 without issue...currently it is in a phenom x6 1055t where the issue reoccurred (but not persistent as in the previous rig), lesser athon x3 don't have issues too..it is not a cpu triggered issue based from comparisons.

it works at ~6.9 now, after i restarted it and it is running for hours now, something triggered it to run at ~3.6..thinking of heat still(since it is in a cooler location now), will clean it and investigate thermal paste and pads in the future..

here is another weird shit hehe(different rig), a 1080ti card don't want to mine with other 2 1080ti i thought it is defective (replaced it with another card rig works), and then i let it mine as a single gpu on a separate rig and it worked  and i added another one (the ~3.6 one when issue appears)after i find it stable..so far they are stable mining as a 2 card rig..from what i observed in msi afterburner, although all cards are set at default and at 80 PL, that particular card clocks a little bit higher..

note: all cards are of the same brand and model.

[george2019]

well after 27 hours of mining i made almost 1 grin coin (At the moment it is around 0.0032 bitcoin) with 2.9% rejected shares and zero stability issues and restarts:

https://i.imgur.com/NYQAn5B.png

miner shows only 27.20g/sec hashrate while pool 30g/sec

i think nicehash will also add grincoin, both beam and grin coin mining looks quite promising

[realbminer]

Hi everyone!
We are glad to announce that we just donated half of the collected Grin devfee so far to Grin general fund. And we’ll keep doing donations to Grin general fund.We are proud to support the Grin developer team and the future of Grin.

[topteam]

good news
waiting C31

[qwep1]

Hi everyone!
We are glad to announce that we just donated half of the collected Grin devfee so far to Grin general fund. And we’ll keep doing donations to Grin general fund.We are proud to support the Grin developer team and the future of Grin.

when amd fo grin ?

[sirszor]

Hi,
I try to mine GRID with my 3x NV1070Ti
I get the following error:
"The semaphore timeout period has expired, resetting in 5sec"
What can cause this error? What is this?

[evlo]

I tried mining grin29, i have 92GB of virtual memory, on 12th (last) 1060 6g card miner dies with failed to initialize solver

[angelbbs]

Please add support for mining BEAM on NiceHash.

NiceHash requires a change in stratum protocol for equihash 150,5. Job message contains additional parameter "nonceprefix", which follows the same rules as "nonceprefix" field in the login response.

Protocol specifications:
https://github.com/nicehash/Specifications/blob/master/Beam_NiceHash_v1.0.txt

After the required change, Bminer could be added to NiceHashMiner Legacy - currently used by more than 70k miners.

+1

[goshoxray]

Hello guys... i want to ask about -api. When i open the site there is only bminer and nothing more i dont have stats... how to fix it ?

[borox]

Please add support for mining BEAM on NiceHash.

NiceHash requires a change in stratum protocol for equihash 150,5. Job message contains additional parameter "nonceprefix", which follows the same rules as "nonceprefix" field in the login response.

Protocol specifications:
https://github.com/nicehash/Specifications/blob/master/Beam_NiceHash_v1.0.txt

After the required change, Bminer could be added to NiceHashMiner Legacy - currently used by more than 70k miners.

+1

+1 !!

[FloppyPurpleGherkin]

Hi everyone!
We are glad to announce that we just donated half of the collected Grin devfee so far to Grin general fund. And we’ll keep doing donations to Grin general fund.We are proud to support the Grin developer team and the future of Grin.

Nice one 

[freedom777]

Hi everyone!
We are glad to announce that we just donated half of the collected Grin devfee so far to Grin general fund. And we’ll keep doing donations to Grin general fund.We are proud to support the Grin developer team and the future of Grin.

What about C31 algo on Windows??

[evlo]

1060 6g
92gb swap

[crairezx20]

What happen to my GTX 1080ti I'm getting around 3.53 fixed mining almost 8 hours but I got huge hashrate drop almost 50%?

What happen? The gtx 1080ti is in GPU 0?

this happened to one of my 3 card (1080ti) rig, using gminer 1.23, other 3 card rigs works fine..

i put the card in 2 card rig, the card now mines at ~6.9, maybe due to cooler area i placed it in...i noticed that although the gpu core is lower in temps compared to the other 2 1080 ti it simply throttles down from ~6.9 to 3.6 after a few hours...leaving it for now since it is doing ~6.9 in the 2 card rig, will investigate in the future..

i'm suspecting it maybe is throttling down due to heating of the VRMs...happend to one of my 390s back then, don't know if 1080 ti do this too...notice the power is ~240+ watts, that's heavy on the VRMs

edit: it still go down to ~3.7 in the 2 card rig..i think it is a card issue

Celeron? You may be CPU bound. Otherwise lower your power level to 70% or so.

socket 775 xeon x3220 rig where i found it, i have same rig with no issues and i have even a lesser q8400 without issue...currently it is in a phenom x6 1055t where the issue reoccurred (but not persistent as in the previous rig), lesser athon x3 don't have issues too..it is not a cpu triggered issue based from comparisons.

it works at ~6.9 now, after i restarted it and it is running for hours now, something triggered it to run at ~3.6..thinking of heat still(since it is in a cooler location now), will clean it and investigate thermal paste and pads in the future..

here is another weird shit hehe(different rig), a 1080ti card don't want to mine with other 2 1080ti i thought it is defective (replaced it with another card rig works), and then i let it mine as a single gpu on a separate rig and it worked  and i added another one (the ~3.6 one when issue appears)after i find it stable..so far they are stable mining as a 2 card rig..from what i observed in msi afterburner, although all cards are set at default and at 80 PL, that particular card clocks a little bit higher..

note: all cards are of the same brand and model.

I set the clock to 150 and memclock to 800 but it doesn't change my hashrate I already increase the virtual memory to 32gb and I have 3 GPU in one rig.
What do you think the reason why the hashrate drop to 3.6?

Every time I restart the rig the hashrate back to 5.9 but doesn't increase to 7sol/s.

My driver version is 399 cuda 9.2.

[SecretRecipe]

What happen to my GTX 1080ti I'm getting around 3.53 fixed mining almost 8 hours but I got huge hashrate drop almost 50%?

What happen? The gtx 1080ti is in GPU 0?

this happened to one of my 3 card (1080ti) rig, using gminer 1.23, other 3 card rigs works fine..

i put the card in 2 card rig, the card now mines at ~6.9, maybe due to cooler area i placed it in...i noticed that although the gpu core is lower in temps compared to the other 2 1080 ti it simply throttles down from ~6.9 to 3.6 after a few hours...leaving it for now since it is doing ~6.9 in the 2 card rig, will investigate in the future..

i'm suspecting it maybe is throttling down due to heating of the VRMs...happend to one of my 390s back then, don't know if 1080 ti do this too...notice the power is ~240+ watts, that's heavy on the VRMs

edit: it still go down to ~3.7 in the 2 card rig..i think it is a card issue

Celeron? You may be CPU bound. Otherwise lower your power level to 70% or so.

socket 775 xeon x3220 rig where i found it, i have same rig with no issues and i have even a lesser q8400 without issue...currently it is in a phenom x6 1055t where the issue reoccurred (but not persistent as in the previous rig), lesser athon x3 don't have issues too..it is not a cpu triggered issue based from comparisons.

it works at ~6.9 now, after i restarted it and it is running for hours now, something triggered it to run at ~3.6..thinking of heat still(since it is in a cooler location now), will clean it and investigate thermal paste and pads in the future..

here is another weird shit hehe(different rig), a 1080ti card don't want to mine with other 2 1080ti i thought it is defective (replaced it with another card rig works), and then i let it mine as a single gpu on a separate rig and it worked  and i added another one (the ~3.6 one when issue appears)after i find it stable..so far they are stable mining as a 2 card rig..from what i observed in msi afterburner, although all cards are set at default and at 80 PL, that particular card clocks a little bit higher..

note: all cards are of the same brand and model.

I set the clock to 150 and memclock to 800 but it doesn't change my hashrate I already increase the virtual memory to 32gb and I have 3 GPU in one rig.
What do you think the reason why the hashrate drop to 3.6?

Every time I restart the rig the hashrate back to 5.9 but doesn't increase to 7sol/s.

My driver version is 399 cuda 9.2.

You really really should update your drivers.

[vertti]

We are glad to announce that we just donated half of the collected Grin devfee so far to Grin general fund. And we’ll keep doing donations to Grin general fund.We are proud to support the Grin developer team and the future of Grin.

That is awesome. Watching the grincon, it's pretty obvious that with no ICO, no premine etc, the dev team really needs this kind of help.