[ANN] US/North American Bitfury sales NEW STOCK ***NOW SHIPPING***

[bkpduke]

Count me in for some dead v1 H-boards.

3 in total, one with an obvious bad solder point.

This is out of 48 total boards, so could be worse.

Just emailed Yvonne to see about RMA for replacements.

[Keefe]

So h-boards are back in stock with 250 count... where's the shipments?

Wow, I literally hit Save about 30 seconds ago...yes I have a few extra H-cards of the old type that arrived.  Since I don't the M-boards for them, they are only useful for filling out your V1 or V2 M-boards.  Buy them now, and they will ship immediately.

Production is cranking for the next-gen boards, but I haven't received any shipping notifications yet.  I expect to see something in the next day or two...when product is on the way I'll give an update.

Orders placed now for H-cards will ship immediately? But I have not yet received shipment notification for an older order of H-cards (not with M-boards, so I've been assuming I'll get the old type). Is that order shipping immediately as well, as in today/tomorrow?

Please contact Yvonne immediately - if you have an H-card order for V1/V2 M-boards, it should be out the door by now.  Sorry for the trouble.

Shipped Tue afternoon after emailing her. Thanks!

[pacojones]

I've asked via the megabigpower power site as well - any ideas on when the October hardware should be delivered??  I was originally told last week and that's not right, so...  Please point me in the right direction, maybe I missed a post on another thread??..??

I ordered just over three months ago -  #33x

[dacman61]

But notice my observation about cards with and without caps here:  https://bitcointalk.org/index.php?topic=287590.msg3390730#msg3390730

I haven't noticed that problem myself, running 7 original boards with 8 "new" boards in one rig right now..  Very stable.

   You got lucky and I did not get lucky ordered 5 Hboards.  I got one dead and 4 other shut off about 10 minutes and get very hot.

I am having trouble with one of my new v1 H-boards as well shorting out my whole rig. I don't notice anything damaged or anything smelling funny either. I've tried many ways to troubleshoot the problem.

[tacotime]

Still nada over here I'm starting to get worried that the diff will be 600m + by the time the boards arrive

[pacojones]

I've asked via the megabigpower power site as well - any ideas on when the October hardware should be delivered??  I was originally told last week and that's not right, so...  Please point me in the right direction, maybe I missed a post on another thread??..??

I ordered just over three months ago -  #33x

I received a very kind reply from customer service - should have information later (today?) on availability - I'll post an update if I hear anything and would appreciate it if others did the same!

[RHA]

We'll mine our own equipment before we fire sale hardware.

Dave, 100TH is still waiting for undelivered hardware...

[Xian01]

How are things coming along for shipping October orders, Dave ? v3 stuff coming online ?
 

[-Redacted-]

We'll mine our own equipment before we fire sale hardware.

And therein lies the heart of a number of problems, two of which are:

No price adjustment of retail prices to match the difficulty. 
No adding hardware to the 200TH 100TH 83TH mine until the hardware is so obsolete that no one will purchase it retail.

[Yogafan00000]

Has anyone had their October starter kits ship yet?

[xstr8guy]

Has anyone had their October starter kits ship yet?

No

[Kaega]

Has anyone had their October starter kits ship yet?

They still have a few days right?  September went out completely before October ... right?  Wait till Nov 15, then wonder why you haven't received it.

[Yogafan00000]

Has anyone had their October starter kits ship yet?

They still have a few days right?  September went out completely before October ... right?  Wait till Nov 15, then wonder why you haven't received it.

Oh, for sure.  I'm not complaining... (yet  )

I haven't paying close attention to each and every post of all 165 pages.  I did notice that some people have claimed shipping of order numbers higher than mine.

That's why I was asking, I wanted to make sure I didn't get missed somehow...

[tom99]

Has anyone had their October starter kits ship yet?

They still have a few days right?  September went out completely before October ... right?  Wait till Nov 15, then wonder why you haven't received it.

Oh, for sure.  I'm not complaining... (yet  )

I haven't paying close attention to each and every post of all 165 pages.  I did notice that some people have claimed shipping of order numbers higher than mine.

That's why I was asking, I wanted to make sure I didn't get missed somehow...

   Starter kits for 25Gh/s and 400Gh/s are waiting for newer V3 h/w.  Most orders shipped out newer V1 Hboard for older Mboards.

[tom99]

   I am still waiting for RMA and no email yet for today?

[klondike_bar]

Try changing the following lines in miner.h and assuming you are using Auto-tuning. These work best for me

Code:

#define MAXSPEED 55
#define DEFSPEED 54
#define MINSPEED 53

Thanks. Does this require running 'make' after editing that file?

Yes, you need to make it. you can make it inside /opt/bitfury/chainminer directory

how would i do this on a running unit

edit: think i got it.

Code:

 cd /opt/bitfury/chainminer
pico miner.h
*make edits to file, then exit with saving*
make
sudo reboot 

[mb300sd]

Are we going to be compensated if units are not received before the end October like the Sept orders were? I'm considering canceling at this point, don't see ROI coming any time soon...

[greaterninja]

I bought 5 starter kits and I obviously only need 1-2.


I'll sell a 32-37GH/s starter kit for $1200 OBO, includes 1 h-board, raspberry pi and 1 sd card with each kit.  you will have to reimage the sd card.

3 starter kits for sale and they will probably get to you before this week is over.

[Syke]

I bought 5 starter kits and I obviously only need 1-2.


I'll sell a 32-37GH/s starter kit for $1200 OBO, includes 1 h-board, raspberry pi and 1 sd card with each kit.  you will have to reimage the sd card.

3 starter kits for sale and they will probably get to you before this week is over.

I'd love to pickup another starter kit, but with h-boards already over priced at $500, your asking price is not interesting.

[frankenmint]

I've asked via the megabigpower power site as well - any ideas on when the October hardware should be delivered??  I was originally told last week and that's not right, so...  Please point me in the right direction, maybe I missed a post on another thread??..??

I ordered just over three months ago -  #33x

I received a very kind reply from customer service - should have information later (today?) on availability - I'll post an update if I hear anything and would appreciate it if others did the same!

so did this happen paco...we're all eagerly (well, some are begrudgingly) awaiting any news of delivery of v3 hardware for assembly and shipment!