PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[majika]

@der][meister RE:6900XT I just stumbled on morepowertools RED BIOS EDITOR and MorePowerTool for Polaris, Navi and Big Navi – MPT 1.3.7 Final (New)
Just getting reading now..

https://www.igorslab.de/en/red-bios-editor-and-morepowertool-adjust-and-optimize-your-vbios-and-even-more-stable-overclocking-navi-unlimited/ If interested.
Now, I know there is some life after RX580 bios / modding on Navi /Big Navi cards.. This seems like this tool mods the powertables (in memory) as opposed to flashing the BIOS I maybe wrong tho.. will see.. Research continues.. 

Note, I have Samsung GDDR6 Memory So ,this is great news, idk if these cards come in any other flavour memory chips like my old 580's Hynix/Micron/Elphidia/Samsung..

Now to get these thing running on PhoenixMiner.

[sxemini]

This is what I really wanted to share with you guys.. These hashrates from some of the RX580's 34.2MH/s @ ~92w Stable!!!!  (x4 GPU rig pulling only 620w from the wall !)
I Think this can be improved too..

Feel free to take a Look at screenshot.
RX580 x4 Stable @ 34.2MH/s - Update: Now ~17hrs into this run Stable!.

https://imgur.com/rZxc1ht
[img=https://imgur.com/rZxc1ht]https://imgur.com/rZxc1ht[/img]

92w + 30e - 40w = 120e - 130w. You can´t take the wattage from the miner software -> it is wrong, you must add 30 - 40w per RX card. I can reach the 34mh also with some of my RX570, so nothing special. And 620w from the wall with 4 gpus is also nothing special. I can reach 800w with 6 GPU´s.

[webhead]

does this do any lhr stuff yet???

[waywoos2]

Not yet.  He said this coming month he msg release something

[makipsee]

I wish they would make dag cache for EZIL

[majika]

IGNORE THAT LINK BELOW

There is No Ver 6 of PHOENIX Miner
Look on the 1st page for official Links

[der][meister]

<If -resetoc enabled> Does this setting mean that the OC settings in the config.txt will be ignored? Another word will it run the cards at stock regardless of what settings are in the config.txt.?
OR does this setting work <If -resetoc is enabled> by clearing any previous OC settings BEFORE launching the actual mining config and running the process THEN reapplies the clocks/mem & voltage...

- Final question about -resetoc,  Can this be applied per GPU or ALL detected under "-d 0,1,2,3,4,5,6,7,8,9,10,11"

1. No... Yes... -resetoc resets OC at miner startup, if the miner crashes or gets force closed the OC wound be reset and stay active. If you reboot a hole Rig, the OC wound last, a booting system/os would load the GPUs bios values, that's the reason for bios modding...
2. No... There is no need to -resetoc per GPU, what for? you apply OC per Gpu, so resetting all is totally fine if needed...

Wil post speeds/config once sorted and any tweaking /tools/guides I can manage to find.

Don't! This is a development Threat, this is totally the wrong place for learning or sharing how to configure miners or gpus... Report bugs, ask for features, download new versions from the first post... If you wanna chat use https://www.reddit.com/r/EtherMining/... You wrote massive post, you even do double posts, that's not what this is Threat is meant for...

[ironmanred]

In my setting, every 30 seconds, "main Eth: Accepted shares (# of shares)" is recorded in the log. Does the number include shares found during "DevFee" or not? 

[Deafran]

2021.12.02:10:05:54.725: hwmc NVAPI error in NvapiWrapper.c:1080 : -6
2021.12.02:10:05:54.725: hwmc NVAPI error in NvapiWrapper.c:1269 : -6
2021.12.02:10:05:54.729: hwmc NVAPI error in NvapiWrapper.c:1269 : -6

anyone can help with that messages ??  pls ...

[creatormultiply]

Error quote running on Windows 10 64-bit while mining XMR with CPU...

CUDA version: 11.0, CUDA runtime: 8.0
NVML library initialized
Nvidia driver version: 456.71
No OpenCL platforms found
Available GPUs for mining:
GPU1: EVGA GeForce GTX 1060 3GB (pcie 1), CUDA cap. 6.1, 3 GB VRAM, 9 CUs
Eth: the pool list contains 2 pools (2 from command-line)
Eth: primary pool: ssl://eu1.ethermine.org:5555
Starting GPU mining
Eth: Connecting to ethash pool ssl://eu1.ethermine.org:5555 (proto: QtMiner)
GPU1: 38C 0% 10W
GPUs power: 9.7 W
Eth: Connected to SSL ethash pool eu1.ethermine.org:5555 (172.65.207.106)
Listening for CDM remote manager at port 3333 in read-only mode
Eth: New job #97050827 from ssl://eu1.ethermine.org:5555; diff: 4295MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #457
Eth: New job #7508f464 from ssl://eu1.ethermine.org:5555; diff: 4295MH
Eth: New job #8de67bce from ssl://eu1.ethermine.org:5555; diff: 4295MH
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
Light cache generated in 5.2 s (14.2 MB/s)
GPU1: Allocating DAG (4.59) GB; good for epoch up to #459
CUDA error in CudaProgram.cu:393 : out of memory (2)
GPU1: CUDA memory: 3.00 GB total, 2.43 GB free
GPU1 initMiner error: out of memory
Fatal error detected. Restarting.
Eth: New job #b83e6831 from ssl://eu1.ethermine.org:5555; diff: 4295MH



Eth: New job #2d9a5f79 from ssl://eu1.ethermine.org:5555; diff: 4295MH
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
Eth: New job #63b9a0f8 from ssl://eu1.ethermine.org:5555; diff: 4295MH



Eth: New job #ba0c420d from ssl://eu1.ethermine.org:5555; diff: 4295MH
Eth: New job #bd16bbb4 from ssl://eu1.ethermine.org:5555; diff: 4295MH
Phoenix Miner 5.9d Windows/msvc - Release build
-----------------------------------------------

Waiting 15 s for previous instance to close

[waywoos2]

You can’t use a 3gb card for eth

[ironmanred]

In my setting, every 30 seconds, "main Eth: Accepted shares (# of shares)" is recorded in the log. Does the number include shares found during "DevFee" or not? 

I found answer for myself - No, the accepted shares doesn't include DevFee share. I did this by analyzing a log file running for 24 hours and counted all numbers of ETH share and DevFee share.

[creatormultiply]

You can’t use a 3gb card for eth

Why not?
And do you have any suggestions on what I can mine (profitably) with my setup?

[miner29]

You can’t use a 3gb card for eth

Why not?
And do you have any suggestions on what I can mine (profitably) with my setup?

Eths DAG file which the gpu must put in its Vram is bigger than 4GB now and growing.
You can do ETC, Ergo, VTC, CCX, BTG.  Just has to be a coin with algo that still works on only 3gb or less vram.

[matmator]

Hello,
can we mine eth but on 2 different addresses on the same rig? for example 5gpu on one address, and 5 gpu on another address?

[rampagePZ]

The official release version was updated to 5.9d because we fixed some regression bugs that were introduced in 5.9b, and 5.9c. You can download PhoenixMiner 5.9d from the first post of this thread.

The changes in this release (since 5.9c) are:

• Fixed issues with AMD RX6700XT with older drivers
• Other small fixes

Any chance for partial LHR unlock in the next versions?

[versus87]

Hello,
using your Miner on PC, wanted to use it on Laptop, but it can't manage full load (not sufficient cooling is possible) of GPU (GTX 1660ti m), i tried the given Functions of  <-li, -mi > but could not get the miner to go easier on the GPU,
any ideas how to reduce mining speed, but use like 60 % of GPU LOAD?
GPU has no Power tuning in MSI Afterburner. Tried Core and Memory to set max negative, didn't work.

[relax69]

Hello,
can we mine eth but on 2 different addresses on the same rig? for example 5gpu on one address, and 5 gpu on another address?

Yes, but need to set up 2 miners running at the same time.

[atwd]

This morning two different users posted a 6.0 version of this miner.
I noticed both posts got deleted so I guess they were spammers.

Sadly I downloaed and launched that 6.0 version.

I didn't mine because I got an error saying there was a problem with my drivers, advising me to go back to the 5.5c version.

Now I deleted it but I'm worried I could have installed some kind of virus in my pc.

Does someone knows what was that supposed 6.0 version?

I know it's clearly a fake version, but what was supposed to do? Maybe just to mine for another wallet instead of mine?

I mostly need to know if my passwords and everything in my pc could be compromised, or if I'm fine by just deleting it.

By the way, windows didn't find any virus. That's weird considering that the official phoenixminer gets blocked by Chrome and by windows because they see it as a threat.

[Digital_Seytan]

Phoenixminer is far behind on all fronts unfortunately with other miners, in itself phoenixminer is a good miner but should be in the front and not at the back has anyone tried these mining softwares with even lower devfee 0.5 % than PM and experiences with them BZMiner and TeamBlackMiner