PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[Bagge6]

Is it ok for a GPU to run +1000 mem clock for long perioids of time? My MSI gaming X 1060 6gb can run +1000 mem clock without errors but i'm thinking perhaps it's not good to run such high speeds for a long time... My rig is 2x msi gaming x 1060 6gb, asus 1060 6gb dual fan and evga 1060 6gb.

As long as the rig is running stable and not over temperature, it's perfectly fine. However in terms of overclocking, more is not always better and you might be using less than optimal settings with such a high overclock. If you're on Windows, a good way to find the most efficient settings is with the GPU utilization sensor in GPU-Z. Ideally you want to slowly increase your overclock settings  until you reach 100% utilization. That should be the optimal setting for your card.

Im at the gpuz app rn but cant locate the utilization, is it in the main page

[Vann]

It's in the 'sensors' tab, the second one. 'GPU Load'

[alizali]

i got rx6800
no hashrate with ver 5.5C or 5.6a or 5.6b
what is the problem?

[Lkokra]

Hello,

I have AMD RX580 8 GB with the driver 21.4.1 also phoenixminer 5.6b which would be perfect for this driver BUT there is one problem when I Tune my GPU and turn of FANS on 50% every time it crush in like 10 or 15 minutes later I don't know what's going on also this problem was early drivers and the AMD error Say "We detected a driver timeout has occurred on your system. A bug report has been generated. This report could help AMD find a solution... " Compute mode is turned ON... The miner working on Windows 10...

any ideas? please help me <3

[lallutrader]

Hello,

I have AMD RX580 8 GB with the driver 21.4.1 also phoenixminer 5.6b which would be perfect for this driver BUT there is one problem when I Tune my GPU and turn of FANS on 50% every time it crush in like 10 or 15 minutes later I don't know what's going on also this problem was early drivers and the AMD error Say "We detected a driver timeout has occurred on your system. A bug report has been generated. This report could help AMD find a solution... " Compute mode is turned ON... The miner working on Windows 10...

any ideas? please help me <3

It's getting hot...take the io plate and put a extra fan on it..

[dazmann]

Hello,

I have AMD RX580 8 GB with the driver 21.4.1 also phoenixminer 5.6b which would be perfect for this driver BUT there is one problem when I Tune my GPU and turn of FANS on 50% every time it crush in like 10 or 15 minutes later I don't know what's going on also this problem was early drivers and the AMD error Say "We detected a driver timeout has occurred on your system. A bug report has been generated. This report could help AMD find a solution... " Compute mode is turned ON... The miner working on Windows 10...

any ideas? please help me <3

Your GPU may be shutting down. Power supply may not be enough or it is overheating and shutting down as a failsafe.
If you're doing anything graphic intensive while mining, like gaming or doing some hardware decode you can experience all sorts of crashes.
If you want to use your machine for browsing or watching youtube/netflix try deactivating hardware acceleration in your browser.

[hnws]

i got rx6800
no hashrate with ver 5.5C or 5.6a or 5.6b
what is the problem?

Are you using Linux? I have the same thing when running Linux with 6900 XT.

[batsonxl]

Hello,

I have AMD RX580 8 GB with the driver 21.4.1 also phoenixminer 5.6b which would be perfect for this driver BUT there is one problem when I Tune my GPU and turn of FANS on 50% every time it crush in like 10 or 15 minutes later I don't know what's going on also this problem was early drivers and the AMD error Say "We detected a driver timeout has occurred on your system. A bug report has been generated. This report could help AMD find a solution... " Compute mode is turned ON... The miner working on Windows 10...

any ideas? please help me <3

Never forget this: In mining not always latest drivers means best. There must be time devs can upgrade miners after that you can use.
For example myself using 5.4c with driver 20.11.1 i will not change until long period,
Download 20.11.1 driver and try again. and also if you share bat file you will get more help.

[nerle]

Hello,

I need your help. My config runs fine a few months now and I had daily returns mining eth. I haven't changed anything and form this morning 5 o'clock I get the error from PhonixMiner 5.5.c (nothing config changed!) "unable to authorize worker xyz" but the worker xyzzy does exist at mininigpoolhub and as said: nothing changed.

Any ideas?

best regards Dirk

[Ursul0]

Hello,

I have AMD RX580 8 GB with the driver 21.4.1 also phoenixminer 5.6b which would be perfect for this driver BUT there is one problem when I Tune my GPU and turn of FANS on 50% every time it crush in like 10 or 15 minutes later I don't know what's going on also this problem was early drivers and the AMD error Say "We detected a driver timeout has occurred on your system. A bug report has been generated. This report could help AMD find a solution... " Compute mode is turned ON... The miner working on Windows 10...

any ideas? please help me <3

Never forget this: In mining not always latest drivers means best. There must be time devs can upgrade miners after that you can use.
For example myself using 5.4c with driver 20.11.1 i will not change until long period,
Download 20.11.1 driver and try again. and also if you share bat file you will get more help.

somewhat correct, for my Polarises I use 19.12.2 (with old api its somewhat easier to configure fans, just set target temperature around or below 70) and 20.4.2.
20.11.1( I use this one for vegas and 5700) is not good, maybe issues with OVDT or amdmemtweak or something...

[dazmann]

Please update github page. Releases.

Github releases are only for the main releases, beta and other files can be found in the github files page.

[DGBfanster]

Any chance of releasing the Absolute Core Clock feature for Turing and Ampere cards?

[skidkins]

I found in the telegram channel where the archive of miners from Phoenix is made. I checked it and it turned out not to be a virus. There are just a bunch of ready-made files for mining with different pools. The author wrote that he made it in case of a backup download. Channel Name: Phoenix Miner Archive
--------------------
Я нaшeл в тeлeгpaм кaнaл гдe cдeлaн apxив мaйнepoв oт Фeникca. Пpoвepил eгo и oкaзaлocь нe виpyc. Taм пpocтo кyчa гoтoвыx фaйлoв для мaйнингa c paзными пyлaми. Aвтop нaпиcaл, чтo cдeлaл eгo нa cлyчaй peзepвнoгo cкaчивaния. Haзывaeтcя кaнaл: Phoenix Miner Archive

[Targonis]

i got rx6800
no hashrate with ver 5.5C or 5.6a or 5.6b
what is the problem?

Check the post for 5.6b about the drivers that work with it.   Under Windows, 5.6b works with Radeon Software 21.4.1, 5.6a works with up to 21.3.2(meaning 21.4.1 breaks it).   Linux is another story for the drivers that are supported, but you NEED to install the proper driver version(s) that are compatible.

[oblivionxt]

Hi guys,
Anyone having trouble with AMD auto-tune ? ("z" runtime shortcut more specifically?) I keep pressing "z" and it doesn't start auto-tune, stuck at -gt 15

Is this an RX 6000 card?  They do not currently tune.  The default -mi is also set too high on RX 6000 and can cause driver time-outs and crashes.  Lowering it to ~4 fixes this with only a slight Mh/s drop.

[oblivionxt]

Hello,

I have AMD RX580 8 GB with the driver 21.4.1 also phoenixminer 5.6b which would be perfect for this driver BUT there is one problem when I Tune my GPU and turn of FANS on 50% every time it crush in like 10 or 15 minutes later I don't know what's going on also this problem was early drivers and the AMD error Say "We detected a driver timeout has occurred on your system. A bug report has been generated. This report could help AMD find a solution... " Compute mode is turned ON... The miner working on Windows 10...

any ideas? please help me <3

Sounds similar to the mining intensity issue with RX 6000 cards on windows 10.  The Devs might have set the -mi value too high for  your card.  Try lowering the -mi value until you just start to lose Mh/s, for my RX 6800 it's about -mi 4.

[socks435]

Do you have any idea why I got so many invalid share compared to valid share?



Running with GTX 1080 ti and 1070s

[Verbl Kint]

Sounds similar to the mining intensity issue with RX 6000 cards on windows 10.  The Devs might have set the -mi value too high for  your card.  Try lowering the -mi value until you just start to lose Mh/s, for my RX 6800 it's about -mi 4.

What average hashrate do you end up with for your RX 6800?  Have you tried the April driver + 5.6b?

[br2459]

Do you have any idea why I got so many invalid share compared to valid share?



Running with GTX 1080 ti and 1070s

Might back off the clock settings. Usually if you look at the miner output it will tell you if all of the cards are throwing incorrect shares or just one. That way you can adjust the one that is actually throwing the incorrect shares. I have one 1070 that will throw incorrect shares if I put the mem clock to +950.

[swogerino]

Sounds similar to the mining intensity issue with RX 6000 cards on windows 10.  The Devs might have set the -mi value too high for  your card.  Try lowering the -mi value until you just start to lose Mh/s, for my RX 6800 it's about -mi 4.

What average hashrate do you end up with for your RX 6800?  Have you tried the April driver + 5.6b?

Rx 6800 should have hashrate similar to Rx 6800 XT,in fact in many websites they report the same hashrate.I have lately build a rig with Rx 6800 Xt cards and the reported hashrate is the same from 5.5c up to 5.6b which is 59.8 Mhsh with default settings without any fine tuning and without playing with the values in AMD Radeon software or MSI Afterburner.I am running them in Windows 10 clean ISO downloaded from Microsoft.
My cards are Radeon Powercolor Red Devil triple fan and they run really cool and quiet.