majika
Jr. Member
Activity: 64
Merit: 5
|
 |
May 01, 2021, 11:53:17 AM |
|
Sup, Just catching up on past couple of pages on this thread I noticed a few references to version of PM which to my knowledge DO NOT EXIST >> OFFICIAL PM Repo:- https://github.com/PhoenixMinerDevTeam/PhoenixMiner/releasesThe Latest Release = PhoenixMiner 5.5c @PhoenixMinerDevTeam released this on Mar 8 <=== (Not 6.6 NOT 5.6b) Correct me if I'm wrong or have missed a secret drop?.. Cheers, -Maj |
|
|
|
|
|
P00P135
|
|
May 01, 2021, 11:57:44 AM |
|
Sup, Just catching up on past couple of pages on this thread I noticed a few references to version of PM which to my knowledge DO NOT EXIST >> OFFICIAL PM Repo:- https://github.com/PhoenixMinerDevTeam/PhoenixMiner/releasesThe Latest Release = PhoenixMiner 5.5c @PhoenixMinerDevTeam released this on Mar 8 <=== (Not 6.6 NOT 5.6b) Correct me if I'm wrong or have missed a secret drop?.. Cheers, -Maj Click the OP's name look at his recent posts and you'll see the newer versions. |
|
|
|
|
dazmann
Jr. Member
Activity: 45
Merit: 6
|
|
May 01, 2021, 03:16:45 PM |
|
Sup, Just catching up on past couple of pages on this thread I noticed a few references to version of PM which to my knowledge DO NOT EXIST >> OFFICIAL PM Repo:- https://github.com/PhoenixMinerDevTeam/PhoenixMiner/releasesThe Latest Release = PhoenixMiner 5.5c @PhoenixMinerDevTeam released this on Mar 8 <=== (Not 6.6 NOT 5.6b) Correct me if I'm wrong or have missed a secret drop?.. Cheers, -Maj You can find beta versions and other files are found here https://github.com/PhoenixMinerDevTeam/files |
|
|
|
|
silence2020
Newbie
Activity: 1
Merit: 0
|
 |
May 01, 2021, 06:11:20 PM |
|
PhoenixMiner 5.6b. is crashing on my 6700 xt,
it looks at the card, kinda recognises it, starts mining and crashes 0mh/s
pls can you fix this? my card is not running atm, i have a mixed rig
|
|
|
|
|
batsonxl
Member
Activity: 1217
Merit: 30
|
|
May 01, 2021, 07:59:47 PM |
|
In the last few days despite the same hash rate, the reward progresses is very slowly. Is it due to the price increase of ETH?
I'm using Nanopool
It is related with increasing hashrate that makes higher difficulty now = 7.43P. last month was 6 or something it grows very fast it means less rewards, also right now fees are low but later swapping 2 starts i think rewards will be better |
|
|
|
|
majika
Jr. Member
Activity: 64
Merit: 5
|
|
May 01, 2021, 08:46:32 PM |
|
You can find beta versions and other files are found here https://github.com/PhoenixMinerDevTeam/files[/quote] ...
Thanks for that pointer guys PheonixMiner should/Need's to update the OP... |
|
|
|
|
thx333
Newbie
Activity: 11
Merit: 0
|
|
May 01, 2021, 10:01:12 PM |
|
In the last few days despite the same hash rate, the reward progresses is very slowly. Is it due to the price increase of ETH?
I'm using Nanopool
It is related with increasing hashrate that makes higher difficulty now = 7.43P. last month was 6 or something it grows very fast it means less rewards, also right now fees are low but later swapping 2 starts i think rewards will be better We are nearing the end of ethereum mining  |
|
|
|
|
kisukadas
Newbie
Activity: 2
Merit: 2
|
|
May 01, 2021, 10:08:22 PM |
|
Hi guys,
Anyone having trouble with AMD auto-tune ? ("z" runtime shortcut more specifically?) I keep pressing "z" and it doesn't start auto-tune, stuck at -gt 15
|
|
|
|
|
tommy1735
Member
Activity: 89
Merit: 12
|
|
May 02, 2021, 12:09:41 AM |
|
anyone knows if core + mem clock and voltages can be set in ubuntu these days? i tried it some years ago and it was not working thats why i used windows... would like to try ubuntu again if someone knows if it work
|
|
|
|
|
artyeung
Newbie
Activity: 1
Merit: 0
|
|
May 02, 2021, 12:50:31 PM |
|
Is it the right place to report a bug? I have a mixed rig with RX570 + 1070 + 1060 and I was running T-rex + Teamredminer. The combined dashboard hash rate was pretty good (83.5MH/s) but the effective hash rate was a bit disappointed (around 80.5MH/s). So I decided to give PhoenixMiner a try, I am using the latest version 5.6b but I noticed that I can only see the GPU temperature on the RX570 while it is missing on the 1060+1070. Nvidia driver is 466.11 / AMD driver is 21.4.1. I keep all the parameters default except "-cmdport", "-rxboost 20" for the AMD card, and "-straps 4" for Nvidia cards. I posted it on Reddit and it seems someone running a mixed rig also notice the same issue. https://www.reddit.com/r/EtherMining/comments/n357te/phoenixminer_missing_temperature_on_nvidia_cards/ |
|
|
|
|
|
Vann
|
|
May 02, 2021, 03:26:37 PM |
|
anyone knows if core + mem clock and voltages can be set in ubuntu these days? i tried it some years ago and it was not working thats why i used windows... would like to try ubuntu again if someone knows if it work
Yes. I have Polaris GPU's mining in Arch Linux and set the core/mem overclocks, voltages, power limit and fan speed with the latest Phoenix miner config file. You can also set them through the terminal using rocm-smi. https://www.blog.albertbling.com/posts/how-to-mine-ethereum-on-linux/ |
|
|
|
|
|
Vann
|
|
May 02, 2021, 03:54:49 PM |
|
Is it the right place to report a bug? I have a mixed rig with RX570 + 1070 + 1060 and I was running T-rex + Teamredminer. The combined dashboard hash rate was pretty good (83.5MH/s) but the effective hash rate was a bit disappointed (around 80.5MH/s). So I decided to give PhoenixMiner a try, I am using the latest version 5.6b but I noticed that I can only see the GPU temperature on the RX570 while it is missing on the 1060+1070. Nvidia driver is 466.11 / AMD driver is 21.4.1. I keep all the parameters default except "-cmdport", "-rxboost 20" for the AMD card, and "-straps 4" for Nvidia cards. I posted it on Reddit and it seems someone running a mixed rig also notice the same issue. https://www.reddit.com/r/EtherMining/comments/n357te/phoenixminer_missing_temperature_on_nvidia_cards/I also have the same problem of the temperature not being reported with Nvidia Pascal GPU's in Linux when I try the latest Phoenix miner 5.6 betas. v5.5c works fine. |
|
|
|
|
wOvAN
Jr. Member
Activity: 41
Merit: 3
|
|
May 02, 2021, 06:42:03 PM |
|
Is it the right place to report a bug? I have a mixed rig with RX570 + 1070 + 1060 and I was running T-rex + Teamredminer. The combined dashboard hash rate was pretty good (83.5MH/s) but the effective hash rate was a bit disappointed (around 80.5MH/s). So I decided to give PhoenixMiner a try, I am using the latest version 5.6b but I noticed that I can only see the GPU temperature on the RX570 while it is missing on the 1060+1070. Nvidia driver is 466.11 / AMD driver is 21.4.1. I keep all the parameters default except "-cmdport", "-rxboost 20" for the AMD card, and "-straps 4" for Nvidia cards. I posted it on Reddit and it seems someone running a mixed rig also notice the same issue. https://www.reddit.com/r/EtherMining/comments/n357te/phoenixminer_missing_temperature_on_nvidia_cards/I also have the same problem of the temperature not being reported with Nvidia Pascal GPU's in Linux when I try the latest Phoenix miner 5.6 betas. v5.5c works fine. add: -hstats 2 |
|
|
|
|
scryptr
Legendary
Activity: 1806
Merit: 1034
|
|
May 02, 2021, 07:58:58 PM |
|
WILL VERTHASH BE ADDED?--
I tried mining UbqHash and PhoenixMiner ran for at least a week with no errors or rejects. VertHash is more profitable and requires only a 2GB GPU. With the GPU market being sold out, my older GPUs need a good AltCoin and VTC fits the bill.
Your UBQ miner is reliable and runs well. I'd like to see VTC added, and with the same reliability and control that PhoenixMiner already offers.
Please add VTC mining capability. --scryptr
|
|
|
|
|
Vann
|
|
May 02, 2021, 08:47:08 PM |
|
add:
-hstats 2
Thanks for the suggestion, but with -hstats 2 on the latest v5.6b beta it still does not report the temperature. Just the fan speed, power and clocks. I'm concerned it wont shut down the GPU's if the tstop limit is reached. |
|
|
|
|
snappleapple100
Newbie
Activity: 9
Merit: 0
|
|
May 02, 2021, 09:08:27 PM |
|
hello , has anybody come across phoenix miner just closing after 5000+ shares found ? i had zero rejected shares before it just shut down this is 2nd time it has happen
|
|
|
|
|
sir_blacks
Jr. Member
Activity: 119
Merit: 3
|
|
May 03, 2021, 01:59:41 AM
Last edit: May 03, 2021, 02:16:17 AM by sir_blacks |
|
Hello o7 I am trying to mine some ETC Classic but something it is bad with DAG generator aka: GPU1: NVIDIA GeForce GTX 1060 3GB (pcie 1), CUDA cap. 6.1, 3 GB VRAM, 9 CUs GPU1: Allocating DAG (2.66) GB; good for epoch up to #213 CUDA error in CudaProgram.cu:388 : out of memory (2) GPU1: CUDA memory: 3.00 GB total, 2.43 GB free GPU1 initMiner error: out of memory Fatal error detected. Restarting. Ok acording to GPU-Z gpu what i want to use for mining it have in use 151 MB ok, now let's do some simple math 3000 MB - 151 MB = 2849 MB free, soo IF DAG it require 2.66 then i will do agen math 2849 - 2660 = 189 MB Free!!! so my question is how program it not have inaff free GPU memory ?! i am scraching my head trying to not get in infinite loop error  p.s. gpu what i try to use is secondary for windows /own need i have other one ... same i was test nanominer it working, gminer and lolminer same issue fail on DAG allocation with is strange ... p.s. from logs made by nanominer = 2021-May-03 05:10:47: GPU0: 2711 MB DAG generated in 8.26 seconds acording https://minerstat.com/dag-size-calculatorETC actual DAG size = 2648 cheers |
|
|
|
|
batsonxl
Member
Activity: 1217
Merit: 30
|
|
May 03, 2021, 12:22:54 PM |
|
Hello o7 I am trying to mine some ETC Classic but something it is bad with DAG generator aka: GPU1: NVIDIA GeForce GTX 1060 3GB (pcie 1), CUDA cap. 6.1, 3 GB VRAM, 9 CUs GPU1: Allocating DAG (2.66) GB; good for epoch up to #213 CUDA error in CudaProgram.cu:388 : out of memory (2) GPU1: CUDA memory: 3.00 GB total, 2.43 GB free GPU1 initMiner error: out of memory Fatal error detected. Restarting. Ok acording to GPU-Z gpu what i want to use for mining it have in use 151 MB ok, now let's do some simple math 3000 MB - 151 MB = 2849 MB free, soo IF DAG it require 2.66 then i will do agen math 2849 - 2660 = 189 MB Free!!! so my question is how program it not have inaff free GPU memory ?! i am scraching my head trying to not get in infinite loop error p.s. gpu what i try to use is secondary for windows /own need i have other one ... same i was test nanominer it working, gminer and lolminer same issue fail on DAG allocation with is strange ... p.s. from logs made by nanominer = 2021-May-03 05:10:47: GPU0: 2711 MB DAG generated in 8.26 seconds acording https://minerstat.com/dag-size-calculatorETC actual DAG size = 2648 cheers If you have onboard vga then swith then try again. or use hiveos. Looks like you are using windows right? If so windows uses alot memory when you connect monitor. also you can add -eres 0 to not allocate 2 epoch dag. |
|
|
|
|
sir_blacks
Jr. Member
Activity: 119
Merit: 3
|
|
May 03, 2021, 01:22:03 PM
Last edit: May 03, 2021, 03:09:07 PM by sir_blacks |
|
Hello o7 I am trying to mine some ETC Classic but something it is bad with DAG generator aka: GPU1: NVIDIA GeForce GTX 1060 3GB (pcie 1), CUDA cap. 6.1, 3 GB VRAM, 9 CUs GPU1: Allocating DAG (2.66) GB; good for epoch up to #213 CUDA error in CudaProgram.cu:388 : out of memory (2) GPU1: CUDA memory: 3.00 GB total, 2.43 GB free GPU1 initMiner error: out of memory Fatal error detected. Restarting. Ok acording to GPU-Z gpu what i want to use for mining it have in use 151 MB ok, now let's do some simple math 3000 MB - 151 MB = 2849 MB free, soo IF DAG it require 2.66 then i will do agen math 2849 - 2660 = 189 MB Free!!! so my question is how program it not have inaff free GPU memory ?! i am scraching my head trying to not get in infinite loop error p.s. gpu what i try to use is secondary for windows /own need i have other one ... same i was test nanominer it working, gminer and lolminer same issue fail on DAG allocation with is strange ... p.s. from logs made by nanominer = 2021-May-03 05:10:47: GPU0: 2711 MB DAG generated in 8.26 seconds acording https://minerstat.com/dag-size-calculatorETC actual DAG size = 2648 cheers If you have onboard vga then swith then try again. or use hiveos. Looks like you are using windows right? If so windows uses alot memory when you connect monitor. also you can add -eres 0 to not allocate 2 epoch dag. I have 2 GPU: 1. GIGABYTE NVIDIA GeForce GTX 1060 3GB 2. GIGABYTE NVIDIA GeForce GTX 650 2GB 3. Windows 10 Pro 20H2 4. For tuning i use Msi AF GTX 1060 3GB = Power Limit 68-70, Core Clock: 150, Memory Clock: 500 5. GPU from CPU it is completly disable i not need 6. 12 G Ram - Swap = 16384 - 20480 7. I use -gpus 1 command in bat file aka it chose only 1060 one 8. I mine in this condition in past ETH (when dag was lower), BTG (work perfectly) and other varios coin 9. Command used: PhoenixMiner.exe -gpus 1 -rvram -1 -eres 0 -coin etc -pool pollname -wal wallet.worker GPU.Z Vram https://i.imgur.com/uHSXtsu.pngSimple math: 3000 - 150 (windows 10 cut crap) = 2850 FREE - 2660 (DAG required) = 190 FREE VramWhen i mine i make 650 Default / Main gpu for use (changing main monitor ...) for browsing, watching movie, reading news it is perfect ... soo 1060 it is completly free and dedicate only to mining purpuse I am doing this for fun, i know it is not optimal or geting great result but heh if i can do it why not. |
|
|
|
|
swogerino
Legendary
Activity: 3976
Merit: 1264
|
|
May 04, 2021, 07:43:54 AM |
|
I am using now Phoenixminer 5.6b and it is running flawlessly in my RX 6800 XT rig.No problems so far for an hour with default settings.I was using Teamredminer until this release and it used to give me the error GPU found dead with default settings.This looks like a really good miner finally for the RX 6800 XT.I will let it run for a few more hours and then I will also update my small rig with a RTX 3060 ti and a RX 5700 XT with this miner.This is a job well done Phoenixminer.
|
|
|
|
|
