[ANN][POOL] ZERGPOOL.com - Multialgo, autoexchange, 0.5% fee, 250+ coins

[sundownz]

RVN is kicking major butt... so here is my experience with various cards on it:

1050Ti : Crashes constantly
1060 : No problem
1070 : No problem
1070Ti : No problem
1080 : Crashes constantly
1080Ti : No problem

Anyone else seeing this at all ? I cannot get my 1080 systems stable with RVN mining (via NEMOS)... I dropped intensity as far as 17 and still had the system crashing (black screen / re-boot). Went all the way down to zero overclock as well. No luck.

Not too worried about the 1050Ti systems as I don't have a ton of power in those... but I do have ~30 pcs of 1080s that I've currently disable x16r on.

Working fine on my multi-1070 and single-1080 rigs.  However, I have been using ccMiner Enemy v1.03 and not Nemos.

I may need to try that for my 1080 and 1050Ti systems... NEMOS has RavenMiner 225 as it's built-in miner.

CCminer Enemy is the winner... thank you starrbuck for the suggestion.



I am testing on 2 of my 1080 systems so far stable... also ONE of my 1060 systems went down with RavenMiner 225... that system had been on stable for 54 days straight prior.

In any event... I swapped it to CCMiner Enemy as well -- the power graph, I believe, tells the story... also CCMiner Enemy is faster.

So... I will convert all of my systems, even the ones that don't appear to have stability issues.

PS: It also works on my 1050Ti systems.

[1715361501]

1715361501

[1715361501]

1715361501

[1715361501]

1715361501

[arkpopoff]

UPDATE:

1. Reducing payment thresholds. Fixed LTC threshold as 0.25 LTC and 0.05 LTC on Sundays. And other altcoins as 0.001 in BTC equivalent, and 0.0002 BTC on Sundays
2. Exchange time is removed for direct mining coins via Option 2

My LTC wallet LUmas8439cvL9M6noiAzfxZpDkXASn56gu. Why didn't we make the payment?

[prvs]

RVN is kicking major butt... so here is my experience with various cards on it:

1050Ti : Crashes constantly
1060 : No problem
1070 : No problem
1070Ti : No problem
1080 : Crashes constantly
1080Ti : No problem

Anyone else seeing this at all ? I cannot get my 1080 systems stable with RVN mining (via NEMOS)... I dropped intensity as far as 17 and still had the system crashing (black screen / re-boot). Went all the way down to zero overclock as well. No luck.

Not too worried about the 1050Ti systems as I don't have a ton of power in those... but I do have ~30 pcs of 1080s that I've currently disable x16r on.

Working fine on my multi-1070 and single-1080 rigs.  However, I have been using ccMiner Enemy v1.03 and not Nemos.

I may need to try that for my 1080 and 1050Ti systems... NEMOS has RavenMiner 225 as it's built-in miner.

With 1080 all ok, work.

[buffy007]

Now you can use our Android Yiimp Balance Monitor for checking zergpool mining

More info: https://bitcointalk.org/index.php?topic=2638122.0

[Dalba]

Hello,
x16r algo seems to be down right now... What's happening ?

[sundownz]

RVN is kicking major butt... so here is my experience with various cards on it:

1050Ti : Crashes constantly
1060 : No problem
1070 : No problem
1070Ti : No problem
1080 : Crashes constantly
1080Ti : No problem

Anyone else seeing this at all ? I cannot get my 1080 systems stable with RVN mining (via NEMOS)... I dropped intensity as far as 17 and still had the system crashing (black screen / re-boot). Went all the way down to zero overclock as well. No luck.

Not too worried about the 1050Ti systems as I don't have a ton of power in those... but I do have ~30 pcs of 1080s that I've currently disable x16r on.

Working fine on my multi-1070 and single-1080 rigs.  However, I have been using ccMiner Enemy v1.03 and not Nemos.

I may need to try that for my 1080 and 1050Ti systems... NEMOS has RavenMiner 225 as it's built-in miner.

CCminer Enemy is the winner... thank you starrbuck for the suggestion.

I am testing on 2 of my 1080 systems so far stable... also ONE of my 1060 systems went down with RavenMiner 225... that system had been on stable for 54 days straight prior.

In any event... I swapped it to CCMiner Enemy as well -- the power graph, I believe, tells the story... also CCMiner Enemy is faster.

So... I will convert all of my systems, even the ones that don't appear to have stability issues.

PS: It also works on my 1050Ti systems.

The systems I changed to CCMiner Enemy ran all night no problem.

I am testing another version as well that seems even better... suggested by the author of NEMOSMINER software:

https://github.com/nemosminer/Ccminernevermore/releases

Called CCMiner Nevermore.

Seems even faster than Enemy on my home office 1080Ti -- so I will also try on my other cards at the warehouse.

[sundownz]

Hello,
x16r algo seems to be down right now... What's happening ?

Seems it was just a 15-minute outage. Perhaps overload due to how profitable it has been.

[sundownz]

Any issue with x16r right now?
No block in more than 5 hours...

x16r does seem to go LONG periods of time between blocks on Zergpool... I have considered disabling it on my miners.

-----

Otherwise I have been very pleased with my income so far on Zerg.

Which miner(s) do you use on zergpool? Also, given you have the machinepower to do this; have you tested other pools (e.g. ahashpower, hasrefinery, blazepool, zpool), and come back to this one?

I am doing the head-to head on a friends farm that I manage (he has fewer machines and they are all identical so it's easier) and ZERG is beating ZPOOL by a noticeable amount.

Every day isn't this substantial... but over the last period of time since the last payment... ZERG is making 25% more than ZPOOL per hour / per card on my friends 1080Ti farm (I have 12 cards on ZERG, 41 cards on ZPOOL, and 5 cards on NiceHash on his setup... for comparison sake).

That being said I plan to fully convert him to ZERG today... and have my own equipment all on ZERG within a few more days.

I got my friends setup 100% on ZERG and yesterday he got his first FULL payment after it settled in.

It was 16% higher than the BEST day he has had on ZPOOL since 2/24/18 when I started a log.

Compared to an average day from 2/24 to 3/20 he is 33% higher than he was on ZPOOL.

Granted... x16r has been killing it the last few days so that skews it a bit, I believe... so I will keep monitoring it and report back later.

[sundownz]

Broke through 100 kh/s mark on YescryptR16 on ZERG... still have more to go  

Heads up to pinpins... so far ~6 minutes no connection to YescryptR16. It may need some work.

We are at 30+ minutes down-time on YescryptR16 -- any update on it ?

[CryptKeeper_411]

I'm attempting to mine Artic ARC and all im seeing is this. 

Here is my command line for ccminer
ccminer.exe -a x11 -d gtx1080ti -o stratum+tcp://zergpool.com:8333 -u arc_address_here -p c=ARC

[2018-01-18 19:04:37] accepted: 0/205 (0.00%), 21.59 MH/s booooo
[2018-01-18 19:04:37] reject reason: Invalid job id
[2018-01-18 19:04:38] GPU #0: EVGA GTX 1080 Ti, 21.47 MH/s
[2018-01-18 19:04:38] accepted: 0/206 (0.00%), 21.60 MH/s booooo
[2018-01-18 19:04:38] reject reason: Invalid job id

What am I doing wrong?

I would have  tried the sniffminer but wasn't sure if it worked with sending to  anything but BTC address.

If you want to mine ARC, you need to say "-p c=ARC,mc=ARC" to tell it your wallet is an ARC wallet (currency 'c' is ARC) and mined coin (mc) is ARC as well.  Also the port is 3533 not 8333 as provided for x11 algorithm.  Finally, you would add an "-x11" on the end of it, making it "-p c=ARC,mc=ARC-x11" if you are mining more then one specific coin in this algorithm and this is coin 2 or 3 or x > 1.  This should solve your probs.  I would try it without the -d command, see if that works, and then try adding the -d back in if all is good.  Hope this helps...

[sundownz]

Broke through 100 kh/s mark on YescryptR16 on ZERG... still have more to go  

Heads up to pinpins... so far ~6 minutes no connection to YescryptR16. It may need some work.

We are at 30+ minutes down-time on YescryptR16 -- any update on it ?

FYI -- still down here on YescryptR16.

Also the default "3636" port for x16r is malfunctioning and showing super low hash-rate on the pool side.

[KOLESRB]

why long time no block on raven mining? happening on other algos too!

[eminer001]

why long time no block on raven mining? happening on other algos too!

For the past 24 hours RVN / x16R mining was a disaster ! http://zerg.zergpool.com/site/mining  All my miners were receiving stratum errors with "server is full" or connection denied and the server was not able to allow more than 1000 RVN miners without errors to a part of the miners.

1)
Do you know if load balancing was implemented for x16r ?

you should have 2 or 3 stratum instances for x16r and use round-robin to balance miners
there should be the public port for RNV that is from load balancer
and the load balancer distributes the the miners to all stratum instances with port1, port2, port3

also ZPOOL and many other pools have load balancing for stratum servers implemented  to allow more than 1000 miners per stratum instance and per coin and have instances respond really fast to sudden new connections requests


2)
don't you think that having very low difficulty allowed on many algos creates a lot of problems on your server ?
if you check the stratum source-code you will see that every accepted share automatically has an "insert into database" query
if I am allowed set the difficulty low, I spam your server with 10 shares per second from each miner and each share means an INSERT query into your MYSQL database that is not very fast because  each index for  columns must be created after each insert, and that is creating a LOCK on that table for each insert.  Why do you think NiceHash and so many other pools have high minimum difficulty ??


It should be fixed, don't you think ?

[olegik-ah]

Please, check quark and qubit prof. data (current/24 est/24 actual). Is it correct? Are values really in mBTC/GH/day? It seems they must be divided by 10...
Thanks a lot!

[CryptKeeper_411]

why long time no block on raven mining? happening on other algos too!

For the past 24 hours RVN / x16R mining was a disaster ! http://zerg.zergpool.com/site/mining  All my miners were receiving stratum errors with "server is full" or connection denied and the server was not able to allow more than 1000 RVN miners without errors to a part of the miners.

1)
Do you know if load balancing was implemented for x16r ?

you should have 2 or 3 stratum instances for x16r and use round-robin to balance miners
there should be the public port for RNV that is from load balancer
and the load balancer distributes the the miners to all stratum instances with port1, port2, port3

also ZPOOL and many other pools have load balancing for stratum servers implemented  to allow more than 1000 miners per stratum instance and per coin and have instances respond really fast to sudden new connections requests


2)
don't you think that having very low difficulty allowed on many algos creates a lot of problems on your server ?
if you check the stratum source-code you will see that every accepted share automatically has an "insert into database" query
if I am allowed set the difficulty low, I spam your server with 10 shares per second from each miner and each share means an INSERT query into your MYSQL database that is not very fast because  each index for  columns must be created after each insert, and that is creating a LOCK on that table for each insert.  Why do you think NiceHash and so many other pools have high minimum difficulty ??


It should be fixed, don't you think ?

Something bad is going on on Zergpool lately (last day or two).  "Stratum_recv_line failed" message now repeatedly occurring along with "Stratum difficulty set to 1".  Rejected shares have gone way way up from almost nothing before, as well as a decrease in effective hash rate. Hash is down by about 35%.  Please look into and fix.... help...

[jbeck]

Hi all. First day mining here on zergpool.  I am trying to understand how this pool works like how to read information related to receive payouts.  Right now I am set to auto mine.  What are the basics I need to research to understand whats being displayed on my wallet tab.  I am super sorry for asking such a newbie question What are the important things to look at. I am willing to do my own research but I would appreciate any help or point to past pages that describe the workings. Cheers

[MaxiMan]

I kept tracking earnings last days this is what i got

Code:

DATE	                   BALANCE	DIFF 12H	DIFF 24H
			
03/29/2018 03:57:28	0.00423860	0.00000000	0.00000000
03/29/2018 15:57:29	0.00425641	0.00001781	
03/30/2018 03:57:56	0.00443757	0.00018116	0.00019897

Earnings went so slow last day, mostly mining X16r in contrast to others day where i get 4~7 mBTC/day

[MaxiMan]

Lot of rejected shares!!  This is not good 

[parthibanperiyasamy]

Why so many Rejected shares now? almost all algos

[prvs]

Yes, what happened?!