jlsminingcorp
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 02, 2013, 03:32:49 PM |
|
Thanks someone42, that's just the update we were looking for. This all sounds very positive. So do you have somebody on the team working on the cgminer tweaks, so that we can get hashing as soon as the boards arrive?
See https://github.com/ckolivas/cgminer/pull/499. Thanks, good luck with it.
|
|
|
|
badalien
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 02, 2013, 04:50:27 PM |
|
@cryptx, what is the delivery status for the first okt, week. The fedex tracking number status has no changes until two days?
|
|
|
|
Roy Badami
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 02, 2013, 06:06:17 PM |
|
Wow, that sounds great. I guess this means you can put both Bitburner XXs and Furys to the same CAN-bus and control all boards from one cgminer :-?
In principle, yes, since the CAN-bus protocol is also the same. But in practice, you will get HW errors because of how cgminer's Avalon driver is implemented*. Also, frequency settings are broadcast across the CAN-bus and it's unlikely that you would want Avalon and BitFury to run at exactly the same frequency. Maybe in the future, when a well-designed cgminer driver and corresponding firmware is written, you will be able to mix Avalon/BitFury/Cointerra/whatever BitBurner boards. cgminer doesn't control the voltage of any miner to date. All existing miners (and almost certainly this product as well) operate on a fixed voltage. Changing the voltage requires changing a resistor on the board.
Voltage control for BitBurner boards from within cgminer was added in August (see https://github.com/ckolivas/cgminer/commit/b0f4d55be77adfacc3fd3e1bf0540a0252610455). Thanks someone42, that's just the update we were looking for. This all sounds very positive. So do you have somebody on the team working on the cgminer tweaks, so that we can get hashing as soon as the boards arrive?
See https://github.com/ckolivas/cgminer/pull/499. *cgminer's Avalon driver rotates through an array of work units. Mixing Avalon and BitFury will cause the array rotation to happen too fast for the Avalon boards, causing cgminer to forget about work units and resulting in "no matching work" errors. Thanks for the update. Is there a solution for setting different parameters for XX and Fury boards if we're running both on the same cgminer instance? Particularly with voltage, I *really* don't want to risk getting it wrong and setting the voltage of the board to something other than what I was expecting.
|
|
|
|
BenTuras
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 02, 2013, 06:20:34 PM |
|
Is there a solution for setting different parameters for XX and Fury boards if we're running both on the same cgminer instance? Particularly with voltage, I *really* don't want to risk getting it wrong and setting the voltage of the board to something other than what I was expecting.
You can run multiple cgminer's, one for each stack of boards.
|
|
|
|
Roy Badami
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 02, 2013, 07:50:50 PM |
|
Is there a solution for setting different parameters for XX and Fury boards if we're running both on the same cgminer instance? Particularly with voltage, I *really* don't want to risk getting it wrong and setting the voltage of the board to something other than what I was expecting.
You can run multiple cgminer's, one for each stack of boards. Yes, but if they are all handled by the same driver, how will we specify which boards we want to use? We'll be at the mercy of which order the devices are detected. There must be a better way. Can the driver not tell whether it is an XX or Fury board? I tend to agree with kano that this is the wrong approach. (Note, this is not saying you can't keep the Avalon protocol, if you want to, but the driver needs to know these are Fury boards). I also think the 300mV offset is a recipe for confusion, and is sure to result in fried boards due to people getting confused. roy
|
|
|
|
BenTuras
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 02, 2013, 07:56:02 PM |
|
You can run multiple cgminer's, one for each stack of boards.
Yes, but if they are all handled by the same driver, how will we specify which boards we want to use? We'll be at the mercy of which order the devices are detected. I probably misunderstand you, but if you have a stack of BitBurners and a stack of FuryBurners, each connected with their own USB cable you would run one cgminer and force it to connect to the BitBurners with cgminer command line arguments applicable to the BitBurners. and run a second cgminer and force it to connect to the FuryBurners with cgminer command line arguments applicable to the FuryBurners.
|
|
|
|
Roy Badami
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 02, 2013, 08:00:32 PM |
|
You can run multiple cgminer's, one for each stack of boards.
Yes, but if they are all handled by the same driver, how will we specify which boards we want to use? We'll be at the mercy of which order the devices are detected. I probably misunderstand you, but if you have a stack of BitBurners and a stack of FuryBurners, each connected with their own USB cable you would run one cgminer and force it to connect to the BitBurners with cgminer command line arguments applicable to the BitBurners. and run a second cgminer and force it to connect to the FuryBurners with cgminer command line arguments applicable to the FuryBurners. I hope so. I worry that I won't be able to. kano's comment in the pull request seems to suggest that the fury boards still come up as BTB in cgminer, which is just wrong.
|
|
|
|
stevendevlin
Newbie
Offline
Activity: 23
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 07, 2013, 04:04:13 AM |
|
Can we get a status update? The first week of Oct. has come and gone.
|
|
|
|
mtbitcoin
Legendary
Offline
Activity: 876
Merit: 1000
Etherscan.io
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 07, 2013, 04:20:50 AM |
|
Anyone actually receive their boards yet?
|
|
|
|
DPoS
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 07, 2013, 04:47:23 AM |
|
Anyone actually receive their boards yet?
wait, I thought nothing ever went wrong with anything associated with BitFury .. they are the deliverer of blessings to all
|
|
|
|
QuiveringGibbage
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 07, 2013, 05:39:33 AM |
|
So anyone from batch 1 (week 1) confirm that they've received h/w? of if tracking from fedex says item has been picked up.
I got nothing except tracking number. not sure if i'm in week 1 tho.
Cheers, QG
|
Bitcoin is at the tippity top of the mountain...but it's really only half way up.. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
Picmin
Newbie
Offline
Activity: 23
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 07, 2013, 06:21:48 AM |
|
I'm waiting for fedex delivery today...
|
|
|
|
darkfriend77
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 07, 2013, 07:17:34 AM Last edit: October 07, 2013, 07:29:09 AM by darkfriend77 |
|
arrived ... can anyone give a short info ... about parameters for the bitburner fury? ... for cgminer? Is the avalon stuff valid for BitBurner Fury too? Once raspbian is running open LXTerminal and type the following commands to install the needed prequisites to build cgminer:
sudo apt-get update
sudo apt-get install autoconf libusb-1.0-0-dev libncurses5-dev libcurl4-openssl-dev screen
Then clone the cgminer repository:
git clone https://github.com/ckolivas/cgminer.git cgminer
Enter the new directory, configure and build cgminer
cd cgminer
./autogen.sh –enable-avalon
make
Now cgminer should compile
Cminer Options:
A quote from ASIC-README lists the possible command line argument for the Avalon/BitBurner:
--bitburner-voltage <arg> Set BitBurner core voltage, in millivolts --avalon-temp <arg> Set avalon target temperature (default: 50) --avalon-freq <arg> Set frequency range for avalon-auto, single value or range --avalon-fan <arg> Set fanspeed percentage for avalon, single value or range (default: 20-100) --avalon-cutoff <arg> Set avalon overheat cut off temperature (default: 60) --avalon-options <arg> Set avalon options baud:miners:asic:timeout:freq
|
|
|
|
someone42
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 78
Merit: 11
Chris Chua
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 07, 2013, 07:54:40 AM |
|
arrived ...
can anyone give a short info ... about parameters for the bitburner fury? ... for cgminer?
Is the avalon stuff valid for BitBurner Fury too?
Try this: ./cgminer --config <insert pool config file here> --avalon-options 115200:16:10:d:256 --bitburner-voltage 1230
Here's an explanation of the avalon-options parameter: - 115200: baud rate. Ignored by firmware.
- 16: number of miners. Set this to 16 * number of boards.
- 10: chips per miner. Ignored by firmware.
- d: timeout. Ignored by firmware.
- 256: frequency. This sets the frequency of the external clock. The theoretical hashrate is 11.63 * frequency.
Like with the BitBurner XX boards, --bitburner-voltage controls the core voltage. However, since BitFury is 55 nm instead of Avalon gen1's 110 nm, the actual core voltage will be 300 mV less than what you set here. So "--bitburner-voltage 1230" will set core voltage to 930 mV. (Future versions of the firmware/cgminer will probably use a different identifier to avoid confusion.) It is normal to get hundreds of HW errors/duplicate work on the first run after power up. This is a firmware bug. It should resolve itself in 30 seconds. If you do want to get accurate measurements of HW errors, run cgminer for 30 seconds, then restart cgminer.
|
|
|
|
Picmin
Newbie
Offline
Activity: 23
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 07, 2013, 07:59:31 AM |
|
Thanks Someone42 ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I hope your pull request can be commited soon ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif)
|
|
|
|
darkfriend77
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 07, 2013, 08:02:31 AM |
|
Getting a USB write Error ... This is what I have done ... Once raspbian is running open LXTerminal and type the following commands to install the needed prequisites to build cgminer: sudo apt-get update sudo apt-get install autoconf libusb-1.0-0-dev libncurses5-dev libcurl4-openssl-dev screen Then clone the cgminer repository: git clone https://github.com/ckolivas/cgminer.git cgminer Enter the new directory, configure and build cgminer cd cgminer ./autogen.sh –enable-avalon make clean make Now cgminer should compile now as root I submited ... ./cgminer -n root@bitfury:/home/pi/cgminer# ./cgminer -n [2013-10-07 07:59:57] USB all: found 4 devices - listing known devices .USB dev 0: Bus 1 Device 4 ID: 0403:6001 Manufacturer: 'Burnin Electronics' Product: 'BitBurner' [2013-10-07 07:59:57] 1 known USB devices
./cgminer -o stratum+tcp://nl1.ghash.io:3333 -u xxx.2-p x ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F8BiBTtq.png&t=665&c=_jCr4ams25PDfg)
|
|
|
|
Josue
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 63
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 07, 2013, 08:07:55 AM |
|
Hello someone42. Can you put an example for three boards at maximun speed??
Lot of thanks!!
|
|
|
|
|
biddicoin
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 1077
Merit: 250
CryptoTalk.Org - Get Paid for every Post!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 07, 2013, 08:25:36 AM |
|
Received today....
Can someone explain to a beginner - step by step how to set up this device with CGMiner?
3.5 is the right CGMiner version?
Thank you
|
|
|
|
jlsminingcorp
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 07, 2013, 08:27:31 AM |
|
Cryptx, any update for those of us whose week 1 boards haven't even been sent to FedEx yet?
|
|
|
|
|