NPlusMiner - |MultiRig remote management|AI|Autoupdate|Pool/Algo switching

[JCS-CCT]

with hsr ? 1050ti 4 gb

We were talking about that issue a few posts up.  Cards older than 1060 don't work with HSR.  You'll have to use CcminerKlaust as described in this post: https://bitcointalk.org/index.php?topic=1777336.msg32342559#msg32342559

[JCS-CCT]

Just check \logs\switching.log prior restarting NPlusMiner. Last line will tell you.

I have auto start set, but what could help is if on first run there was some kind of marker added to the log, maybe something like: "-------------"

[k2laci]

Why is there not a hashrefinery in the run section list if I choose it from the config menu?

[JCS-CCT]

The PhoenixMiner Ethash miner might be worth checking out.
https://bitcointalk.org/index.php?topic=2647654.0

[GraySergey]

dear mr plus. Help me please understand the problem. "ActiveMinerGainPct" does not work for me. Shit!!!
https://reho.st/self/7c2cb2baf4542c2761f491fba18d2b95c7a7eaaa.jpg

[MrPlus]

dear mr plus. Help me please understand the problem. "ActiveMinerGainPct" does not work for me. Shit!!!
https://reho.st/self/7c2cb2baf4542c2761f491fba18d2b95c7a7eaaa.jpg

Good timing
Just released 2.1 which fixes it.
https://github.com/MrPlusGH/NPlusMiner/releases

[MrPlus]

Released NPlusMiner 2.1.1
https://github.com/MrPlusGH/NPlusMiner/releases

- Updated Claymore to 11.5
- Changed Miner for Neoscrypt to ccminerKlaust
- Updated ccminerKlaust to 8.21
- Fixed ActiveMinerGainPct
- Fixed BTC/Currency in Console
- Support for running multiple instances
  - You could now run more than one instance of NPlusMiner on the same rig
  - Each instance must be placed in it's own directory
  - Miner has to be started prior the launch of the next instance

[holda29]

Hi, I have problem, NPlusMiner still says Checking version. On 2.1 and 2.1.1 the same problem, on 2.0.3 it just works fine. The problem appears after I change my wallet and restart it. The first run is alwas fine.
Please help, thanks.

[MrPlus]

with hsr ? 1050ti 4 gb

We were talking about that issue a few posts up.  Cards older than 1060 don't work with HSR.  You'll have to use CcminerKlaust as described in this post: https://bitcointalk.org/index.php?topic=1777336.msg32342559#msg32342559

Switched to CcminerKlaust in 2.1.1
https://github.com/MrPlusGH/NPlusMiner/releases

[MrPlus]

Hi, I have problem, NPlusMiner still says Checking version. On 2.1 and 2.1.1 the same problem, on 2.0.3 it just works fine. The problem appears after I change my wallet and restart it. The first run is alwas fine.
Please help, thanks.

Did you check Autostart?

[holda29]

That helped! Thanks.

[qbert7]

with hsr ? 1050ti 4 gb

We were talking about that issue a few posts up.  Cards older than 1060 don't work with HSR.  You'll have to use CcminerKlaust as described in this post: https://bitcointalk.org/index.php?topic=1777336.msg32342559#msg32342559

Switched to CcminerKlaust in 2.1.1
https://github.com/MrPlusGH/NPlusMiner/releases

Cheers, HSR was freezing on both of my 1070 rigs.

[skablast]

just tell me that I can install the new version in the same directory as the old one!
just finished the benchmarks..

[MrPlus]

just tell me that I can install the new version in the same directory as the old one!
just finished the benchmarks..

You can copy the stats folder over to the new version to avoid benchmark.

MrPlus

[JCS-CCT]

Released NPlusMiner 2.1.1
https://github.com/MrPlusGH/NPlusMiner/releases

- Updated Claymore to 11.5
- Changed Miner for Neoscrypt to ccminerKlaust
- Updated ccminerKlaust to 8.21
- Fixed ActiveMinerGainPct
- Fixed BTC/Currency in Console
- Support for running multiple instances
  - You could now run more than one instance of NPlusMiner on the same rig
  - Each instance must be placed in it's own directory
  - Miner has to be started prior the launch of the next instance

The problem with running multiple instances is that Claymore benches all gpus and not the gpus set in the config.  I don't think it is a problem with Claymore but a problem with the configuration in the EthashClaymore.ps1 file.  PhoenixMiner might be worth checking out.  I think it may be easier to configure and is faster and lower fee.

[MrPlus]

The problem with running multiple instances is that Claymore benches all gpus and not the gpus set in the config.  I don't think it is a problem with Claymore but a problem with the configuration in the EthashClaymore.ps1 file.  PhoenixMiner might be worth checking out.  I think it may be easier to configure and is faster and lower fee.

You are right? This is a bug in EthashClaymore.ps1

could you try replacing line 6 with the following and let me know how that goes?

    "ethash" = " -di $($SelGPUCC.Replace(',',''))" #Ethash

This will make it use the config

[JCS-CCT]

The problem with running multiple instances is that Claymore benches all gpus and not the gpus set in the config.  I don't think it is a problem with Claymore but a problem with the configuration in the EthashClaymore.ps1 file.  PhoenixMiner might be worth checking out.  I think it may be easier to configure and is faster and lower fee.

You are right? This is a bug in EthashClaymore.ps1

could you try replacing line 6 with the following and let me know how that goes?

    "ethash" = " -di $($SelGPUCC.Replace(',',''))" #Ethash

This will make it use the config

I'll give it a try later tonight.  Thanks!

[starrbuck]

Just wondering if there has been any research into how much better plus is vs. non-plus.

[skablast]

How can I change the intensity for gtx 1070 in HSR miner ?

[JCS-CCT]

How can I change the intensity for gtx 1070 in HSR miner ?

Latest version doesn't use the HSR miner.