InfiniteImp
Newbie
Offline
Activity: 33
Merit: 0
|
|
December 13, 2018, 12:47:06 AM |
|
Are you saying ccminer is running as well and mining? Or does it just fail to run?
Could you try to run the ccminer command line in a command prompt and report the error you get?
+MrPlus
It's running and mining happily alongside Cryptodredge. Both miners working correctly, except they're doing so simultaneously which isn't good. To me this means one of two things: Ccminer launched and NPlusMiner thinks it failed to launch (and therefore launches another miner) or it failed to shut down. I'm assuming it's the former. It launches but NPlus registers it as a launch fail. It's also rare. I've seen it I think 3 times since I started using NPlus. I always look at both miners and both are mining. I then look at the "Running:" entry on-screen and terminate the miner that isn't shown there (and it's always cccminer).
|
|
|
|
MrPlus (OP)
|
|
December 13, 2018, 09:42:19 AM |
|
Released NPlusMiner 4.5.5https://github.com/MrPlusGH/NPlusMiner/releaseshttps://github.com/MrPlusGH/NPlusMiner/releases/tag/4.5.5NPlusMiner with GUI, AutoUpdate, Earnings Tracker and Monitoring
Candidate for AutoUpdate = Yes - NPlusMiner checks for updates every 24 hours. - If you do not want to wait, simply restart NPlusMiner and it will pick it up on startup
ChangeLog - Fixed miners stilling focus on start - Add miners Monitoring feature - **Many thanks to @NemosMiner for the agreement to share NemosMiner servers.** - You can now optionally monitor all your workers remotely, both in the GUI and via https://nemosminer.com - Monitoring setup instructions https://nemosminer.com/setup.php - NPlusMiner does not send any personnal informations to servers. Only miner related info are collected as miner names and hashrates. Miners path are all expressed relative so we have no risk to send any personnal informations like username. - Added "Mine on Idle" option - If selected NPlusMiner will mine only when computer is idle - Note that Idle detection is only for current user. Other logged on users activity will not be detected. - Miners updates - TRex 0.8.8 - CryptoDregde 0.14
|
|
|
|
MrPlus (OP)
|
|
December 13, 2018, 03:50:56 PM |
|
Are you saying ccminer is running as well and mining? Or does it just fail to run?
Could you try to run the ccminer command line in a command prompt and report the error you get?
+MrPlus
It's running and mining happily alongside Cryptodredge. Both miners working correctly, except they're doing so simultaneously which isn't good. To me this means one of two things: Ccminer launched and NPlusMiner thinks it failed to launch (and therefore launches another miner) or it failed to shut down. I'm assuming it's the former. It launches but NPlus registers it as a launch fail. It's also rare. I've seen it I think 3 times since I started using NPlus. I always look at both miners and both are mining. I then look at the "Running:" entry on-screen and terminate the miner that isn't shown there (and it's always cccminer). Working on this. Could you try to download from master and see if the change I made helps? +MrPlus
|
|
|
|
|
InfiniteImp
Newbie
Offline
Activity: 33
Merit: 0
|
|
December 13, 2018, 11:11:20 PM |
|
Working on this. Could you try to download from master and see if the change I made helps?
+MrPlus
Not sure what you mean by 'download from master' but NPlus did auto-update and I'm at 4.5.5. Is it fixed there?
|
|
|
|
MrPlus (OP)
|
|
December 14, 2018, 05:48:58 AM |
|
Working on this. Could you try to download from master and see if the change I made helps?
+MrPlus
Not sure what you mean by 'download from master' but NPlus did auto-update and I'm at 4.5.5. Is it fixed there? Nope 4.5.5 does not fix it. Master is here: https://github.com/MrPlusGH/NPlusMiner/archive/master.zip+MrPlus
|
|
|
|
MrPlus (OP)
|
|
December 14, 2018, 09:50:00 AM Last edit: December 14, 2018, 12:34:09 PM by MrPlus |
|
Released NPlusMiner 4.5.6https://github.com/MrPlusGH/NPlusMiner/releaseshttps://github.com/MrPlusGH/NPlusMiner/releases/tag/4.5.6Discord: https://discord.gg/2BCqPxeNPlusMiner with GUI, AutoUpdate, Earnings Tracker and Monitoring
Candidate for AutoUpdate = Yes - NPlusMiner checks for updates every 24 hours. - If you do not want to wait, simply restart NPlusMiner and it will pick it up on startup
ChangeLog - Fixed multiple miners running at the same time in some rare cases - Fixed Earnings Tracker not taking into account specific pools configuration - Miners updates - zealotenemy 1.28
|
|
|
|
InfiniteImp
Newbie
Offline
Activity: 33
Merit: 0
|
|
December 15, 2018, 01:14:19 AM |
|
ChangeLog
- Fixed multiple miners running at the same time in some rare cases - Fixed Earnings Tracker not taking into account specific pools configuration - Miners updates - zealotenemy 1.28
Great work, thanks!!
|
|
|
|
MrPlus (OP)
|
|
December 15, 2018, 06:26:04 PM |
|
Want a quick start with NPlusMiner and avoid full benchmark? Participate and benefit from "stats-sharing" in our discord: https://discord.gg/2BCqPxe+MrPlus
|
|
|
|
InfiniteImp
Newbie
Offline
Activity: 33
Merit: 0
|
|
December 16, 2018, 02:35:14 PM |
|
ChangeLog
- Fixed multiple miners running at the same time in some rare cases - Fixed Earnings Tracker not taking into account specific pools configuration - Miners updates - zealotenemy 1.28
It's still happening with 4.5.6. This morning I found t-rex and CryptoDredge running at the same time, with CryptoDredge being the one showing in the 'Running' section. And it pretty much has to be the focus stealing code as it didn't happen before that. It's still pretty rare - once a day or less. If there's any trace or debug code you want to add into the logs I'll try and help you narrow down the cause.
|
|
|
|
InfiniteImp
Newbie
Offline
Activity: 33
Merit: 0
|
|
December 16, 2018, 07:00:08 PM |
|
@MrPus It just happened again, this time two copies of CryptoDredge running. I put back the old version of Start-SubProcess() and I'll monitor it. This is on my second mining PC which just mines and nothing else, so stealing focus doesn't matter to me. I'll leave it as-is on my main PC as stealing focus is really irritating because I use that PC while mining.
Also, point of interest, when I click 'Stop', it does shut down both instances of the miner. Any chance you could just execute that code when performing a miner switch?
|
|
|
|
|
|
InfiniteImp
Newbie
Offline
Activity: 33
Merit: 0
|
|
December 20, 2018, 06:06:35 AM |
|
@MrPlus I think there may be a problem with the 'Donate' mining. I have it set at "Donate (min): 8". Am I right in understanding that means I donate 8 minutes of mining per day to the you and the other people involved in the project? It's been mining for a wallet address starting with "1QGAD", Username: NPlusMiner458 for over 20 minutes now, possibly longer. When I looked at the window at 00:38:14 it was already mining for that wallet. It's now 01:02:00 and it's still at it. Miners have switched at least 5 times.
I noticed the following at 00:58:06
20181220 00:57:21 WrlLufEchLufShaLufShvLufWrlShvShbShaGroEchSkeSmd 20181220 00:57:27 [ OK ] 71/71 - 32.20 MH/s, 120ms 20181220 00:58:04 [ OK ] 72/72 - 32.97 MH/s, 125ms 20181220 00:58:06 Started mining dev fee 20181220 00:58:53 x16r block 499285, diff 52367.271 20181220 00:58:58 x16r block 499286, diff 52367.910 20181220 00:59:06 Done mining dev fee 20181220 00:59:08 [ OK ] 73/73 - 32.26 MH/s, 127ms 20181220 00:59:15 [ OK ] 74/74 - 31.53 MH/s, 124ms 20181220 00:59:19 [ OK ] 75/75 - 30.90 MH/s, 130ms 20181220 00:59:28 [ OK ] 76/76 - 29.67 MH/s, 119ms
However it neither started at 00:58:06 nor was done mining at 00:59:06.
I've restarted the miner at 01:04:00 and it's now mining for me again. As much as I'm glad to contribute for the dev efforts, I also don't want it mining to that address all night.
Can you please check into it?
|
|
|
|
MrPlus (OP)
|
|
December 20, 2018, 09:05:20 AM |
|
@MrPlus I think there may be a problem with the 'Donate' mining. I have it set at "Donate (min): 8". Am I right in understanding that means I donate 8 minutes of mining per day to the you and the other people involved in the project? It's been mining for a wallet address starting with "1QGAD", Username: NPlusMiner458 for over 20 minutes now, possibly longer. When I looked at the window at 00:38:14 it was already mining for that wallet. It's now 01:02:00 and it's still at it. Miners have switched at least 5 times.
I noticed the following at 00:58:06
20181220 00:57:21 WrlLufEchLufShaLufShvLufWrlShvShbShaGroEchSkeSmd 20181220 00:57:27 [ OK ] 71/71 - 32.20 MH/s, 120ms 20181220 00:58:04 [ OK ] 72/72 - 32.97 MH/s, 125ms 20181220 00:58:06 Started mining dev fee 20181220 00:58:53 x16r block 499285, diff 52367.271 20181220 00:58:58 x16r block 499286, diff 52367.910 20181220 00:59:06 Done mining dev fee 20181220 00:59:08 [ OK ] 73/73 - 32.26 MH/s, 127ms 20181220 00:59:15 [ OK ] 74/74 - 31.53 MH/s, 124ms 20181220 00:59:19 [ OK ] 75/75 - 30.90 MH/s, 130ms 20181220 00:59:28 [ OK ] 76/76 - 29.67 MH/s, 119ms
However it neither started at 00:58:06 nor was done mining at 00:59:06.
I've restarted the miner at 01:04:00 and it's now mining for me again. As much as I'm glad to contribute for the dev efforts, I also don't want it mining to that address all night.
Can you please check into it?
Sorry to here you might have an issue here. This should definitely not happen. Your understanding is correct: There is a 8 minutes per day fee (0.5%), that can be changed in the config (Minimum is 3 - 0.2%) When less than 3 minutes is set, lottery is 0 or any walue between 3 and 8 We use a fair fee distribution to developers and contributors. Fees are distributed randomly to a public list of devs which can be found here: http://tiny.cc/r355qy We want to stay completely transparent on the way donations are managed in the product. Donations occurs once every 24 hours for the selected amount of time (default 8 minutes). The first donation sequence occurs 1 hour after miners are started. If Interval is set higher than the donation time, the interval will prime. Example for default parameters: Miners started at 10, First donation cycle runs at 10:52 until 11, Next donation cycle occurs 24 hours after. All donation time and addresses are recorded in the logs folder. Could you please share your Switching.log and miner.log files so I can check. Also, the "Started mining dev fee" you are referring to here is not related to NPlusMiner fee but the miner fee itself. Some miner programs include a dev fee as well. +MrPlus
|
|
|
|
InfiniteImp
Newbie
Offline
Activity: 33
Merit: 0
|
|
December 20, 2018, 01:51:32 PM |
|
|
|
|
|
|
MrPlus (OP)
|
|
December 23, 2018, 09:44:23 AM |
|
|
|
|
|
InfiniteImp
Newbie
Offline
Activity: 33
Merit: 0
|
|
December 26, 2018, 05:06:51 AM |
|
@MrPlus Looks like the miner cycle issue is resolved. I haven't seen two miners running simultaneously on either of my two machines for at least the last 3 or 4 days for sure. Also, I haven't seen the donation bug manifest itself since Dec.20. Running version 4.5.9 and everything's working as it should.
Thanks, and great work on NPlusMiner!
PS. I'm not running anything AMD otherwise I'd offer to help.
|
|
|
|
MrPlus (OP)
|
|
December 28, 2018, 11:48:42 AM |
|
@MrPlus Looks like the miner cycle issue is resolved. I haven't seen two miners running simultaneously on either of my two machines for at least the last 3 or 4 days for sure. Also, I haven't seen the donation bug manifest itself since Dec.20. Running version 4.5.9 and everything's working as it should.
Thanks, and great work on NPlusMiner!
PS. I'm not running anything AMD otherwise I'd offer to help.
Thanks much for the feedback!
|
|
|
|
|