[ANN][MULTI][VARDIFF] TradeMyBit MULTIALGO Profit Swap w/ Optional Auto-exchange

[Xenocyde]

I deleted the hamsi string and I still get hw errors - invalid nonce count. I tried with 4010/4011 and 5550/4440 ports, all the same.

[1714691862]

1714691862

[1714691862]

1714691862

[1714691862]

1714691862

[1714691862]

1714691862

[1714691862]

1714691862

[Spacewide]

If you need help, just PM.
I can help over Teamviewer when I'm home and it's free for the community..

[bullus]

@xenocyde
Which sgminer do u use? I'm using the v5 prerelease25062014 from nicehash site, which is older than on the site now.
u can try the latest one.(06302014)
I must say there are too many sgminers around the net and the stable one is what I use now. Others gave me instability.

[Xenocyde]

I'm trying those bins and miner from this post https://bitcointalk.org/index.php?topic=386554.msg7607558#msg7607558

I also have TeamViewer set up, if you want to directly operate on my mining PC 

[gemmacoin]

Look at the .bin file name and check if it was generated using the correct kernel!

[bullus]

I'm trying those bins and miner from this post https://bitcointalk.org/index.php?topic=386554.msg7607558#msg7607558

I also have TeamViewer set up, if you want to directly operate on my mining PC  

I also tried his bins with 14.4 drivers but didn't work for me also hw errors.
u can also copy the 14.6 opencl/ocl files into the sgminer folder, delete the old bins and it wil create new 14.6 bins because of the opencl files.

[Xenocyde]

Don't really want to mess around with beta drivers. Can you please link your miner and bin files you use?

[bullus]

U dont have to install and mess around with 14.6drivers.
Just download the 14.6drivers, doubleclick the exe and it will extract , then copy the files like this https://bitcointalk.org/index.php?topic=658411.msg7469766#msg7469766 and just quit the install.

more here
https://bitcointalk.org/index.php?topic=658411.msg7461908#msg7461908

[Xenocyde]

I can't find 2 of those files (amd_opencl32.dll and amd_opencl64.dll). Rest I put in the miner folder. Then I try to run miner and gives HW errors and it only creates a ckolivas bin file by default so I can't overwrite any x11 or x13 bins with new ones. I also tried to put the bins in folder before running the miner and it still gives HW errors.

You didn't specify what version of sgminer 5 you are using.

[promailer]

Hey guys what happened? Before i was making like 0.01 bitcoin every 2-3 days. Now I need double that time and my hashrate is the same. Did the prices of X11 and X13 coins got down?

http://i57.tinypic.com/8w9xg6.png

[Spacewide]

Another guide to gain hash with older drivers

http://www.reddit.com/r/vertcoin/comments/298gqc/greenpool_x11_amd_144146_drivers_trick_for_extra/

[Xenocyde]

Another guide to gain hash with older drivers

http://www.reddit.com/r/vertcoin/comments/298gqc/greenpool_x11_amd_144146_drivers_trick_for_extra/

I found those 2 dll i was missing, tried that particular config, with gpu and memclocks for my 280X and still get HW errors. Every time the miner starts it creates a ckolivas bin file, I think this is the problem.

[bullus]

Another guide to gain hash with older drivers

http://www.reddit.com/r/vertcoin/comments/298gqc/greenpool_x11_amd_144146_drivers_trick_for_extra/

I found those 2 dll i was missing, tried that particular config, with gpu and memclocks for my 280X and still get HW errors. Every time the miner starts it creates a ckolivas bin file, I think this is the problem.

Think ur config isn't good..I send u a pm

[Xenocyde]

Another guide to gain hash with older drivers

http://www.reddit.com/r/vertcoin/comments/298gqc/greenpool_x11_amd_144146_drivers_trick_for_extra/

I found those 2 dll i was missing, tried that particular config, with gpu and memclocks for my 280X and still get HW errors. Every time the miner starts it creates a ckolivas bin file, I think this is the problem.

Think ur config isn't good..I send u a pm

Thanks, miner works now, but I have asome problems still:

1. fans are at max speed by default, how do I activate autofan?
2. Scrypt only gives me 550 kh/s instead of 700
3. X13 gives 2.75 instead of 3.1, haven't seen X11 in action but I assume it's lower than what everybody else reported.

[bullus]

Another guide to gain hash with older drivers

http://www.reddit.com/r/vertcoin/comments/298gqc/greenpool_x11_amd_144146_drivers_trick_for_extra/

I found those 2 dll i was missing, tried that particular config, with gpu and memclocks for my 280X and still get HW errors. Every time the miner starts it creates a ckolivas bin file, I think this is the problem.

Think ur config isn't good..I send u a pm

Thanks, miner works now, but I have asome problems still:

1. fans are at max speed by default, how do I activate autofan?
2. Scrypt only gives me 550 kh/s instead of 700
3. X13 gives 2.75 instead of 3.1, haven't seen X11 in action but I assume it's lower than what everybody else reported.

My config don't use gpu settings maybe u should insert gpu clocks. Just tweak around now.
Also didn't fully test scrypt hashrates.

[Xenocyde]

OK but what about autofan?

[bullus]

OK but what about autofan?

Didn't test it yet but u can find more info here
https://github.com/sgminer-dev/sgminer/blob/v5_0/doc/configuration.md#auto-fan

[Xenocyde]

I played around with the gpu specs, seems like my cards are stable at 1050 gpu clock for X11/13/15 and getting almost the improved hashes everybody is reporting, however, scrypt is doing bad at only 530 mh/s and I changed Intensity from 18 to 13 too, but nothing happened. I used to get 700+ mhs with 1020 gpu clock and 1500 memory and intensity 13 but these specs don't work anymore. Anyone has better working scrypt specs?

Also, "auto-fan": true doesn't work. I put only auto-fan / only gpu-fan xx / both / none and miner either starts at max fan speed or stays to lowest possbile (1300 rpm).

[bullus]

Check this topic about sgminer v5
https://bitcointalk.org/index.php?topic=632503.840

[Xenocyde]

Looks like fixed fan speed works OK now. I'm using 48% for both cards.

I'm trying to make the miner auto switch to the most profitable coin among X11/X13/X15 algos, but nothing really works as intended. First I tried to use TMBSwitcher 1.01 but miner idles for more than 1h waiting for work from pool sometimes. I tried using 4010/4011 ports and somehow miner quit after some time. Now I'm trying with 4440/5550/6660 but miner just runs X11 algo when X15 is most profitable and don't know how to make it autoswitch to X15 (bullus' config had default X11 kernel but I deleted that string from config).