aaa10247
Member
Offline
Activity: 75
Merit: 10
|
|
May 03, 2014, 04:47:58 AM |
|
merc82, can you clarify about the btc/mhash/day numbers:
On the site it says they have been adjusted to scrypt mhash..
on this thread you mentioned somebody multiplying by 3 to get the correct profit ratio...
Which is it, or am I confused?
Basically i'm trying to figure out if it's worthwhile to switch to x11. (which for some reason I can only get less than 2x my normal scrypt rate from, I am assuming this has to do with drivers, anybody have a known-working setup for 7950s to get 3x the scrypt rate?)
I agree, I think the display should be accurate and in the native algo. Scrypt should be btc/mhash/s/day Scrypt-N should be btc/mhash/s/day X11 should be in btc/mhash/s/day And if you don't know your mhash/s/day, then just look at the top of the page! I happen to know that my rigs do about 8 mh script, 3750 mh scrypt-N, and 22 Mh/s X11, so I SHOULD JUST BE ABLE TO MULTIPLY THOSE NUMBERS BY YOUR BTC/MHASH/S/DAY POSTED FOR EACH ALGO TO EASILY FIGURE OUT WHICH ALGO IS PAYING THE MOST. OR BETTER YET, WHY DON'T YOU DISPLAY WHICH ALGO IS PAYING THE MOST CURRENTLY, so GPU rig guys can make the changes, and Asics can just sit their ass on scrypt all day. +1
|
|
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
pieran
Newbie
Offline
Activity: 34
Merit: 0
|
|
May 03, 2014, 06:46:34 AM |
|
merc82, can you clarify about the btc/mhash/day numbers:
On the site it says they have been adjusted to scrypt mhash..
on this thread you mentioned somebody multiplying by 3 to get the correct profit ratio...
Which is it, or am I confused?
Basically i'm trying to figure out if it's worthwhile to switch to x11. (which for some reason I can only get less than 2x my normal scrypt rate from, I am assuming this has to do with drivers, anybody have a known-working setup for 7950s to get 3x the scrypt rate?)
I get best results with X11 and new 14.4 driver. With scrypt and 4x7950 I get around 2,7 MH/s, with X11 I get 8 MH/s Here is my config: http://i61.tinypic.com/33dffbm.png
|
|
|
|
jimlite
Legendary
Offline
Activity: 1848
Merit: 1018
|
|
May 03, 2014, 05:41:16 PM |
|
IF I am mining on X11 multi port, how the hell am I getting credits for coins on scrypt-N in my auto exchange?
|
|
|
|
Pelk
|
|
May 03, 2014, 07:14:17 PM |
|
IF I am mining on X11 multi port, how the hell am I getting credits for coins on scrypt-N in my auto exchange?
Could you explain what you mean with your statement ?
|
|
|
|
jimlite
Legendary
Offline
Activity: 1848
Merit: 1018
|
|
May 03, 2014, 08:15:22 PM |
|
IF I am mining on X11 multi port, how the hell am I getting credits for coins on scrypt-N in my auto exchange?
Could you explain what you mean with your statement ? That is pretty explanatory. I have my miners running on your X11 multi-port, yet in the auto exchange I see coins that are being credited that are scrypt-N mixed in with my X11 coins.
|
|
|
|
merc82 (OP)
|
|
May 04, 2014, 01:09:09 AM |
|
IF I am mining on X11 multi port, how the hell am I getting credits for coins on scrypt-N in my auto exchange?
Could you explain what you mean with your statement ? That is pretty explanatory. I have my miners running on your X11 multi-port, yet in the auto exchange I see coins that are being credited that are scrypt-N mixed in with my X11 coins. have you ever mined scrypt-n here? Sometimes it takes time to build up enough coins to autoexchange batches.
|
Rent some Hash @ MiningRigRentals!Lease out your rig, or rent some extra hash today! Live Hashrate graphs, multiple backup pools, many algos and fast and friendly support as well
|
|
|
merc82 (OP)
|
|
May 04, 2014, 01:10:49 AM |
|
merc82, can you clarify about the btc/mhash/day numbers:
On the site it says they have been adjusted to scrypt mhash..
on this thread you mentioned somebody multiplying by 3 to get the correct profit ratio...
Which is it, or am I confused?
Basically i'm trying to figure out if it's worthwhile to switch to x11. (which for some reason I can only get less than 2x my normal scrypt rate from, I am assuming this has to do with drivers, anybody have a known-working setup for 7950s to get 3x the scrypt rate?)
I agree, I think the display should be accurate and in the native algo. Scrypt should be btc/mhash/s/day Scrypt-N should be btc/mhash/s/day X11 should be in btc/mhash/s/day And if you don't know your mhash/s/day, then just look at the top of the page! I happen to know that my rigs do about 8 mh script, 3750 mh scrypt-N, and 22 Mh/s X11, so I SHOULD JUST BE ABLE TO MULTIPLY THOSE NUMBERS BY YOUR BTC/MHASH/S/DAY POSTED FOR EACH ALGO TO EASILY FIGURE OUT WHICH ALGO IS PAYING THE MOST. OR BETTER YET, WHY DON'T YOU DISPLAY WHICH ALGO IS PAYING THE MOST CURRENTLY, so GPU rig guys can make the changes, and Asics can just sit their ass on scrypt all day. caps are cool, really gets the point across Thanks for the suggestion, I'll take it under advisement. We 'normalize' the price per mhash to do exactly what you're asking, determine which algo is paying the most currently.. but I'll see about doing it in a different way since it seems to be confusing.
|
Rent some Hash @ MiningRigRentals!Lease out your rig, or rent some extra hash today! Live Hashrate graphs, multiple backup pools, many algos and fast and friendly support as well
|
|
|
jimlite
Legendary
Offline
Activity: 1848
Merit: 1018
|
|
May 04, 2014, 04:36:56 AM |
|
IF I am mining on X11 multi port, how the hell am I getting credits for coins on scrypt-N in my auto exchange?
Could you explain what you mean with your statement ? That is pretty explanatory. I have my miners running on your X11 multi-port, yet in the auto exchange I see coins that are being credited that are scrypt-N mixed in with my X11 coins. have you ever mined scrypt-n here? Sometimes it takes time to build up enough coins to autoexchange batches. Yes I mined scryp-n with you, but that was like a week ago or something, if you are holding coins that long, you have no idea if you will be a bag holder. I thought you sold immediately?
|
|
|
|
jimlite
Legendary
Offline
Activity: 1848
Merit: 1018
|
|
May 04, 2014, 04:40:57 AM |
|
merc82, can you clarify about the btc/mhash/day numbers:
On the site it says they have been adjusted to scrypt mhash..
on this thread you mentioned somebody multiplying by 3 to get the correct profit ratio...
Which is it, or am I confused?
Basically i'm trying to figure out if it's worthwhile to switch to x11. (which for some reason I can only get less than 2x my normal scrypt rate from, I am assuming this has to do with drivers, anybody have a known-working setup for 7950s to get 3x the scrypt rate?)
I agree, I think the display should be accurate and in the native algo. Scrypt should be btc/mhash/s/day Scrypt-N should be btc/mhash/s/day X11 should be in btc/mhash/s/day And if you don't know your mhash/s/day, then just look at the top of the page! I happen to know that my rigs do about 8 mh script, 3750 mh scrypt-N, and 22 Mh/s X11, so I SHOULD JUST BE ABLE TO MULTIPLY THOSE NUMBERS BY YOUR BTC/MHASH/S/DAY POSTED FOR EACH ALGO TO EASILY FIGURE OUT WHICH ALGO IS PAYING THE MOST. OR BETTER YET, WHY DON'T YOU DISPLAY WHICH ALGO IS PAYING THE MOST CURRENTLY, so GPU rig guys can make the changes, and Asics can just sit their ass on scrypt all day. caps are cool, really gets the point across Thanks for the suggestion, I'll take it under advisement. We 'normalize' the price per mhash to do exactly what you're asking, determine which algo is paying the most currently.. but I'll see about doing it in a different way since it seems to be confusing. Ok, I get it. If you just go to the home page and watch in real time which 3 coins are being mined (in blue), you can see which is most profitable/mhas scrypt converted. So I get it now, and usually the scrypt or scrypt-N are more profitable than x11, but every once in a while x11 is more profitable. And since X11 uses less electricity, it may be better for me (.17c/kw/h). But my suggestion of Posting the days, yesterdays, and last weeks average btc/mh/s for each algo would be very nice, so we could chose our algo.
|
|
|
|
merc82 (OP)
|
|
May 04, 2014, 05:05:35 AM |
|
IF I am mining on X11 multi port, how the hell am I getting credits for coins on scrypt-N in my auto exchange?
Could you explain what you mean with your statement ? That is pretty explanatory. I have my miners running on your X11 multi-port, yet in the auto exchange I see coins that are being credited that are scrypt-N mixed in with my X11 coins. have you ever mined scrypt-n here? Sometimes it takes time to build up enough coins to autoexchange batches. Yes I mined scryp-n with you, but that was like a week ago or something, if you are holding coins that long, you have no idea if you will be a bag holder. I thought you sold immediately? Most of the time we do sell immediately, but in some rare occasions coins linger. We have minimum coin amounts that we send to exchanges for the autoexchange, in some cases a coin may drop off profitability for a while and a block confirms after autoexchange already ran a batch.. leaving not enough to process.. so the next time we mine the coin we end up pushing in some of those previously confirmed coins.
|
Rent some Hash @ MiningRigRentals!Lease out your rig, or rent some extra hash today! Live Hashrate graphs, multiple backup pools, many algos and fast and friendly support as well
|
|
|
jimlite
Legendary
Offline
Activity: 1848
Merit: 1018
|
|
May 04, 2014, 05:18:50 AM |
|
Oh, by the way, GPU coin block reward went to 10,000 like 2 weeks ago. So you are calculating double profitability as well as a dead coin at 1 satoshi. I trust you to research coins in your line up and add or remove coins when they are not profitable. But we all miss things once in a while.
|
|
|
|
goodluck0319
|
|
May 04, 2014, 05:42:12 AM |
|
is WU: 0.103/m good or bad on my rig (2 x 270x & 2 x 290 non x)? all together I got at least 6 MH/s to 7.5 Mh/s.
|
|
|
|
umkas
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 04, 2014, 07:40:28 AM Last edit: May 04, 2014, 10:27:13 AM by umkas |
|
merc82, check you data collection and scoring system. For example, GPU reward is 10000 (not 20000 as TMB think) already for 7-10 days. Maybe other coins also have bad data. If You scoring system use this data, ouch...
upd: and as I see, TMB use this data. 1MH Scrypt have ~150k-200k GPU/day, i.e. 0.0015btc/day/mh, NOT 0.00387btc/day/mh as TMB think. As we see in dashboard, GPU is 17.6% of daily work. Wow, lost 17.6/2=8.8% of daily profit on NScrypt. OMG... You need online check real reward pool get from network and update table
|
|
|
|
platinum4
|
|
May 04, 2014, 10:15:18 AM |
|
merc82!
i want some scrambled eggs, dry, with tobasco sauce!
and some whole milk and some juice! multiport the juice though because i want to drink the most profitable liquid at the time of the meal!
also some bacon too
|
|
|
|
Pelk
|
|
May 04, 2014, 01:00:14 PM |
|
Oh, by the way, GPU coin block reward went to 10,000 like 2 weeks ago. So you are calculating double profitability as well as a dead coin at 1 satoshi. I trust you to research coins in your line up and add or remove coins when they are not profitable. But we all miss things once in a while. merc82, check you data collection and scoring system. For example, GPU reward is 10000 (not 20000 as TMB think) already for 7-10 days. Maybe other coins also have bad data. If You scoring system use this data, ouch...
upd: and as I see, TMB use this data. 1MH Scrypt have ~150k-200k GPU/day, i.e. 0.0015btc/day/mh, NOT 0.00387btc/day/mh as TMB think. As we see in dashboard, GPU is 17.6% of daily work. Wow, lost 17.6/2=8.8% of daily profit on NScrypt. OMG... You need online check real reward pool get from network and update table
I think he will change it and its hard to check all the coins for blockhalfing and blockvaluechanges btw you are also 7-10days late to point this out is WU: 0.103/m good or bad on my rig (2 x 270x & 2 x 290 non x)? all together I got at least 6 MH/s to 7.5 Mh/s.
If its X11 the shown WU is unnecessary, your hasrate should be about 3 times more than scrypt. merc82!
i want some scrambled eggs, dry, with tobasco sauce!
and some whole milk and some juice! multiport the juice though because i want to drink the most profitable liquid at the time of the meal!
also some bacon too
Mahlzeit !
|
|
|
|
umkas
Newbie
Offline
Activity: 14
Merit: 0
|
|
May 04, 2014, 01:52:19 PM Last edit: May 04, 2014, 02:02:40 PM by umkas |
|
I think he will change it and its hard to check all the coins for blockhalfing and blockvaluechanges btw you are also 7-10days late to point this out no, man. I see it above 10 days. I think scoring system is ok, it's only old data in table visualization and as I don't use scrypt-n multiport, it's no matter for me, so I skip this. For my opinion scoring MUST get actual data from wallets transaction online. If coin in some case jump to profatible/nonprofatible (like a microcoin yesterday because developers bug) multipool must use this knowledge immediately.
|
|
|
|
uzgen
Newbie
Offline
Activity: 46
Merit: 0
|
|
May 05, 2014, 07:58:48 AM |
|
Hello merc82. I noticed that PC coin 'last blocks found' page not refreshing from 2014-05-05 02:16:37 on block #7697. Also values at '[PC] This Round / Top Share Contributers ' are very high. https://i.imgur.com/j09qAQW.png
|
|
|
|
bullus
|
|
May 05, 2014, 09:23:56 AM |
|
Merc, can u check the scrypt-N multiport cause the stratum is dead everytime.
|
btc 16LWhms487bzCxQWq5oeW8SMDPmU2rvQjf
|
|
|
BakSAj
|
|
May 05, 2014, 06:26:41 PM |
|
Please someone fix this coin-switch resets on multiport since it reduces profitability + makes stats look bad on all available renting services (yes, even miningrigrentals). Otherwise perfect pool. Thank You.
|
|
|
|
|
|