[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[Ruckster2010]

Nitro pool's 15 mins down time just reduce diff to 4.5 

Love the diff drop, why are those pools down?

[wing_hk]

Nitro pool's 15 mins down time just reduce diff to 4.5 

Love the diff drop, why are those pools down?

Client Upgrade in progress: Downtime expected 15 minutes.

http://ultra.nitro.org/

[Darrell]

http://ultra.minepools.us/ Up and stable 0% fees for next 5 days

[imginy]

Diff on 3 is this coin dying?

[laterbreh]

http://ULTRA.leetpools.NET

Running 0% Promo

Come get your coins while the diff is low!!

Will be doing another block finder bonus promo in the coming day in celebration of the new exchange!!!

Stay tuned!

[tabnk]

Net Hashrate UPDATED !!!

greekpool down also.  so took both heh.

Nitro up soon

Leetpools and idcray still up

[imginy]

glad I went with http://utc.idcray.com been very reliable.

[Toxic2040]

I might not always need a johhny on the spot pool operator but when I do I use ultra.leetpools.net.

[RandyMagnum]

1st GPU on each of my rigs goes dead with "display driver stopped working" message.

The rest of the cards on each rig continue to hash without issue.

This does not/has not happened while mining anything else in the past year, any insight?

[tabnk]

Richer is 1 day !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 

[Protagonus]

1st GPU on each of my rigs goes dead with "display driver stopped working" message.

The rest of the cards on each rig continue to hash without issue.

This does not/has not happened while mining anything else in the past year, any insight?

I assume you undervolt?  if they run for a few hours or so and then die (and undervolted);  just bump the volts up a bit.

 0.005v or so.  Should cure a 3-6hr dead issue.  maybe 0.010v if they die sooner.

Only other thought, is since it's scrypt-jane I noticed that TOO High of TC can cause random deaths.  I ended up with 16384 for 7950's, but most newer series (280-290x) or older 7970-7990; tend to have TC @ 8192.

hope that helps

[tabnk]

Nitro is up now !!!

[Cryddit]

so one more question: can I use the remaining power of my graphic card? I did not try yet, but since power consumption is also 25% less, where is the power? Makes no sense that there is power left, I could just start a second instance, but I guess it would crash...?

The algorithm takes less energy to process, but the bandwith available for your given GPU or CPU is maxed out.    You can't stuff any more information down the pipeline even if the information isn't as computationally intensive for your processor. 

In theory you could run in another thread something like a SHA256 miner, which has high GPU requirements but low bandwidth requirements.  That said, this is the age of SHA256 ASICs, so you're unlikely to get anything SHA256 mining on a GPU.

[Toxic2040]

1st GPU on each of my rigs goes dead with "display driver stopped working" message.

The rest of the cards on each rig continue to hash without issue.

This does not/has not happened while mining anything else in the past year, any insight?

The first few times I ran scrypt-jane I seemed to have that problem..I turned down the intensity to 12 and didnt have that problem anymore. The rigs I have running at 18-20 I turned down to 17 and the same thing. After a few restarts it seemed to go away. On a couple I had to juggle the intensity. (ie. 13,12,13,12,13, 18,17,18,18,18)

YMMV.

[FoBoT]

http://www.reddit.com/r/CryptoCurrency/comments/1x3sg5/ultracoin_subreddit_now_active/

do you plan on having an old school forum or do you intend to use reddit for community interactions?

[RandyMagnum]

1st GPU on each of my rigs goes dead with "display driver stopped working" message.

The rest of the cards on each rig continue to hash without issue.

This does not/has not happened while mining anything else in the past year, any insight?

The first few times I ran scrypt-jane I seemed to have that problem..I turned down the intensity to 12 and didnt have that problem anymore. The rigs I have running at 18-20 I turned down to 17 and the same thing. After a few restarts it seemed to go away. On a couple I had to juggle the intensity. (ie. 13,12,13,12,13, 18,17,18,18,18)

YMMV.

I assume you undervolt?  if they run for a few hours or so and then die (and undervolted);  just bump the volts up a bit.

 0.005v or so.  Should cure a 3-6hr dead issue.  maybe 0.010v if they die sooner.

Only other thought, is since it's scrypt-jane I noticed that TOO High of TC can cause random deaths.  I ended up with 16384 for 7950's, but most newer series (280-290x) or older 7970-7990; tend to have TC @ 8192.

hope that helps

Thanks guys, dropped down to -I 17 on everything, will check back on them in a bit, so far, so good.  I do undervolt, but it's looking like the intensity might be the simple culprit for the moment.  Thanks again!

[Protagonus]

Thanks guys, dropped down to -I 17 on everything, will check back on them in a bit, so far, so good.  I do undervolt, but it's looking like the intensity might be the simple culprit for the moment.  Thanks again!

If you have multiple similar GPU in one rig;  maybe try setting Intensity different for each GPU.  Intensity works a bit different with Jane;  usually you don't see a huge change in Khs like normal scrypt.  However, WU rates are affected.

If you like try I -13,15,17 in a single rig.  To see which gives best WU

Many run with I- 13 and I also found I got the best WU rate.

I believe my Khs was about 50 lower with  I-13 vs I-17; but my WU is 60-80 higher. (per each gpu)

[degenorate]

JOIN NOW!!!


Ultra Coin Pool, 0% fee Pool!!!!! Finding blocks now.  ultra.minepools.us , #minepools

Working IRC Bot with pool hash and info!!!!!!

And NO FEES!!!!!

Join Now!



ultra.minepools.us , #minepools

[tabnk]

It is Feb 6. Exchange should be adding, any moment now .

[jakiman]

I would like to know exactly what time UTC will be enabled for trading at crypto-trade.
It's been Feb 6th for over 15 hours here in Australia. So when is this Feb 6th exactly?