[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[skribnod]

Could someone help me with a problem? I am running the miner form the front page and have two 280x cards. My bat file is:
 
ultracoinminer -o stratum+tcp://ultra.leetpools.com:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale

I input my miner and password but it is giving me this :

  Pool 0 JSON Stratum Auth failed: (null)

 Any help would be appreciated.

  Thanks

[waltsmith]

Quick question,

Is 600-625 mh for a 280x acceptable for this coin?
Is 715-725mh for a 290 acceptable for this coin?

It's just my usual hash is higher within Scrpyt, by a good 25%~

Kind regards,

Yep, those are spot on what you should be getting. As a matter of fact youre beating my 280xs by about 70+Khs

Good job!

Thanks!

Yeah I must say, These MSI Gamer OC TF V1.2 280x's are awesome cards for mining.

mind telling me what kind of settings you guys are using to get that rate on scrypt-jane? I've been using my normal scrypt settings for my cards and my rate is only like 2/3 of normal scrypt.

waltsmith

[Jarod1231]

Could someone help me with a problem? I am running the miner form the front page and have two 280x cards. My bat file is:
 
ultracoinminer -o stratum+tcp://ultra.leetpools.com:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale

I input my miner and password but it is giving me this :

  Pool 0 JSON Stratum Auth failed: (null)

 Any help would be appreciated.

  Thanks

Remove "stratum+tcp://"

[jakiman]

Could someone help me with a problem? I am running the miner form the front page and have two 280x cards. My bat file is:
 
ultracoinminer -o stratum+tcp://ultra.leetpools.com:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale

I input my miner and password but it is giving me this :

  Pool 0 JSON Stratum Auth failed: (null)

 Any help would be appreciated.

  Thanks

Is your username "user" ??
That would be why.

Remove "stratum+tcp://"

No need.

[Jarod1231]

Could someone help me with a problem? I am running the miner form the front page and have two 280x cards. My bat file is:
 
ultracoinminer -o stratum+tcp://ultra.leetpools.com:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale

I input my miner and password but it is giving me this :

  Pool 0 JSON Stratum Auth failed: (null)

 Any help would be appreciated.

  Thanks

Is your username "user" ??
That would be why.

Remove "stratum+tcp://"

No need.

Hell if I know then, I don't have it in my bat and I have no problems

[waltsmith]

Could someone help me with a problem? I am running the miner form the front page and have two 280x cards. My bat file is:
 
ultracoinminer -o stratum+tcp://ultra.leetpools.com:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale

I input my miner and password but it is giving me this :

  Pool 0 JSON Stratum Auth failed: (null)

 Any help would be appreciated.

  Thanks

Remove "stratum+tcp://"

also remove the (--gpu-threads 2) reference. you already took care of it with (-g 2)

waltsmith

[skribnod]

Nope, i replaced user name with my miners name and password has been replaced also. When i took out "stratum....//"  i recieve the same error. I am using "leetpool" for a mining pool. Any other ideas?

  Thanks

[Protagonus]

Nope, i replaced user name with my miners name and password has been replaced also. When i took out "stratum....//"  i recieve the same error. I am using "leetpool" for a mining pool. Any other ideas?

  Thanks

make sure your address in .bat for pool is ultra.leetpools.com:3333

that may be your isssue.....no S.

[skribnod]

Yes i do have the "S" on leetpools, i was wondering how many coins a day is anyone getting on 1000khs?

Thanks and i will try again tomorrow after some sleep.

[Protagonus]

Yes i do have the "S" on leetpools, i was wondering how many coins a day is anyone getting on 1000khs?

Thanks and i will try again tomorrow after some sleep.

darn, was hoping it was the S.  I missed the s myself with first run  .  

1000khz at current difficulty is about 50 coins / day I believe

[laterbreh]

Make sure that your user names is configured right on the my workers page

If your username is username

in the my workers page add a 1, then password X

so in your config you would have -u username.1 -p x

[jakiman]

Could someone help me with a problem? I am running the miner form the front page and have two 280x cards. My bat file is:
 
ultracoinminer -o stratum+tcp://ultra.leetpools.com:3333 -u user.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20 --gpu-threads 2 --expiry 1 --queue 0 --no-submit-stale

I input my miner and password but it is giving me this :

  Pool 0 JSON Stratum Auth failed: (null)

Did you create the worker called "1" in the pool? If not, create it with x as the password.
That error usually happens when your worker's -u and -p is wrong. (or if it doesn't even exist!)

[skribnod]

I just seen on Leetpools website that catalyst 14.1 doesn't work for jane scrypt, how do i tell if that is what i am running? The miner starts up and searches for, acknowledges difficulty level, then goes bad from there. I did everything right and I do mine most other coins with o problem using cgminer but scrypt jane is new to me. Didn't figure that it would bethis difficult.

Thanks

[nanoprobe]

Nope, i replaced user name with my miners name and password has been replaced also. When i took out "stratum....//"  i recieve the same error. I am using "leetpool" for a mining pool. Any other ideas?

  Thanks

Your username needs to be your login username and your miner name. It should read -u loginname.minername -p your password

[skribnod]

This is my miner setup:

ultracoinminer -o ultra.leetpools.com:3333 -u skribnod.1 -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 8192 -g 2 -I 13 -w 256 --temp-cutoff 90 --temp-overheat 85 --gpu-powertune 20  --expiry 1 --queue 0 --no-submit-stale

Still gives me the stratum fail and "Null"

Thanks

[nanoprobe]

https://sites.google.com/site/rmdavidson/

Scroll to the bottom to get the patched CGMiner

Make sure that you put --scrypt-jane in the config

Thanks

[Jarod1231]

https://sites.google.com/site/rmdavidson/

Scroll to the bottom to get the patched CGMiner

Make sure that you put --scrypt-jane in the config

Thanks

ultra.leetpools isnt working for me now either... this is ridiculous how the pools keep going down..... Oh well, set failover for both pools... if both go down it'll switch to solo mining for me

[MasterCATZ]

I just seen on Leetpools website that catalyst 14.1 doesn't work for jane scrypt, how do i tell if that is what i am running? The miner starts up and searches for, acknowledges difficulty level, then goes bad from there. I did everything right and I do mine most other coins with o problem using cgminer but scrypt jane is new to me. Didn't figure that it would bethis difficult.

Thanks

can verify this , I just installed 14 today , and nothing but HW errors on R9 290 , back to scrypt mining for multimedia rig

only reason I am sticking with 14 atm is no tearing during media playback + can mine something at same time

normally I remove ati drivers and go back to mesa on weekends to watch media

[laterbreh]

https://sites.google.com/site/rmdavidson/

Scroll to the bottom to get the patched CGMiner

Make sure that you put --scrypt-jane in the config

Thanks

ultra.leetpools isnt working for me now either... this is ridiculous how the pools keep going down..... Oh well, set failover for both pools... if both go down it'll switch to solo mining for me

We implemented CloudFlare DDOS protection, since we are routing our traffic through them, there might be a chance that youre stuck on our old DNS. Just go ahead and flush your DNS and give us a try. We are up with 600Mhs!

[Brilliantrocket]

When I try to run the UltraCoin miner, it opens and then nothing happens. Any idea as to whats wrong? When I try to connect through the console, nothing happens after I enter my info. It just freezes.