worldlybedouin
|
|
February 11, 2014, 10:01:00 PM |
|
CGminer will recognize this device. If you can run CGminer. You can run a gridseed asic!
That is my impression anyway and i think firmware is being made for the raspberry pi.
You have to use the custom version of cpuminer that is provided...ordinary builds of cgminer and the like won't work for these devices. There's also a USB driver which you need to install in order for Windows to correctly detect the device. Yes, you are correct that users chirale and drfranz are working on a rasberry pi version but it's not ready yet...so you'll have to use the custom CPUminer program provided.
|
LTC: LXrAe2E6cBsK52GvUsYraeXkc2s7Ti7R5X BTC: 1FLTMqVjTZ5MTdCF4npNZGFMEUGyBV4zcj
|
|
|
SheepOnDrugs
Member
Offline
Activity: 112
Merit: 10
|
|
February 11, 2014, 11:00:19 PM |
|
CGminer will recognize this device. If you can run CGminer. You can run a gridseed asic!
That is my impression anyway and i think firmware is being made for the raspberry pi.
You have to use the custom version of cpuminer that is provided...ordinary builds of cgminer and the like won't work for these devices. There's also a USB driver which you need to install in order for Windows to correctly detect the device. Yes, you are correct that users chirale and drfranz are working on a rasberry pi version but it's not ready yet...so you'll have to use the custom CPUminer program provided. Isn't it working on Linux?
|
|
|
|
bearsworth
|
|
February 11, 2014, 11:30:53 PM |
|
is there escrow allowed?
No thats why they sent out samples to well known members. 1000$ worth atleast. I personally ordered today Thanks. To do bank transfer, would I do this on the site or pm? Asia btc, get my pm? Thanks. I think he is sleeping. Ill hook you up with a copy of the PM i got from him. I wouldn't send any funds until you confirm stock obviously. I am under the impression he has plenty though. Thank you very much.
|
Bitrated user: cryptomark.
|
|
|
worldlybedouin
|
|
February 11, 2014, 11:49:49 PM |
|
CGminer will recognize this device. If you can run CGminer. You can run a gridseed asic!
That is my impression anyway and i think firmware is being made for the raspberry pi.
You have to use the custom version of cpuminer that is provided...ordinary builds of cgminer and the like won't work for these devices. There's also a USB driver which you need to install in order for Windows to correctly detect the device. Yes, you are correct that users chirale and drfranz are working on a rasberry pi version but it's not ready yet...so you'll have to use the custom CPUminer program provided. Isn't it working on Linux? To my knowledge Gridseed has not released the source code for the custom CPUminer software...however, chirale/drfranz's rasberry pi version is linux based...so i don't know if that helps.
|
LTC: LXrAe2E6cBsK52GvUsYraeXkc2s7Ti7R5X BTC: 1FLTMqVjTZ5MTdCF4npNZGFMEUGyBV4zcj
|
|
|
TheMage
|
|
February 12, 2014, 01:03:53 AM |
|
Hi everyone As mentioned in a previous post I was one of the selected folks to receive this item for testing the validity of it. I did the initial set up and gave my thoughts on it about a week ago, you can go here and on pages 6 and 7 are my results as well as comments. https://litecointalk.org/index.php?topic=13314.75Asiabtc has a lot of work to do on the firmware to get certain things fixed, but I was told these items were fixed as well as the supposed 500kh as show in the secret picture in the initial post. Just to clear some confusion (because I received a few PM's about it over at liteointalk), I have not received the new firmware. I asked earlier today and was told very soon. So maybe by this weekend if I get the new firmware I will post my results over litecointalk. Thanks all and feel free to let me know if you have any questions !
|
|
|
|
velvethammer2
Member
Offline
Activity: 65
Merit: 10
|
|
February 12, 2014, 02:00:19 AM |
|
|
Did I Help? BTC: 1CNjvKYdqXNmkNvt87fQSRbEftxsDanV1H LTC: LWUkLNiGTwBZkgKRH3VKuLvZHGVvjmxVXZ
|
|
|
Anotheranonlol
|
|
February 12, 2014, 02:22:20 AM |
|
CGminer will recognize this device. If you can run CGminer. You can run a gridseed asic!
That is my impression anyway and i think firmware is being made for the raspberry pi.
You have to use the custom version of cpuminer that is provided...ordinary builds of cgminer and the like won't work for these devices. There's also a USB driver which you need to install in order for Windows to correctly detect the device. Yes, you are correct that users chirale and drfranz are working on a rasberry pi version but it's not ready yet...so you'll have to use the custom CPUminer program provided. Isn't it working on Linux? To my knowledge Gridseed has not released the source code for the custom CPUminer software...however, chirale/drfranz's rasberry pi version is linux based...so i don't know if that helps. yes they released months ago he is making a killing on markup.. shovel buyers lining up
|
|
|
|
TrollboxChamp
|
|
February 12, 2014, 02:43:11 AM |
|
I'm salivating looking at all that scrypt hashing power Order got confirmed. Now to wait for tracking
|
|
|
|
TrollboxChamp
|
|
February 12, 2014, 02:44:44 AM |
|
CGminer will recognize this device. If you can run CGminer. You can run a gridseed asic!
That is my impression anyway and i think firmware is being made for the raspberry pi.
You have to use the custom version of cpuminer that is provided...ordinary builds of cgminer and the like won't work for these devices. There's also a USB driver which you need to install in order for Windows to correctly detect the device. Yes, you are correct that users chirale and drfranz are working on a rasberry pi version but it's not ready yet...so you'll have to use the custom CPUminer program provided. Isn't it working on Linux? To my knowledge Gridseed has not released the source code for the custom CPUminer software...however, chirale/drfranz's rasberry pi version is linux based...so i don't know if that helps. yes they released months ago he is making a killing on markup.. shovel buyers lining up And AMD/Newegg/Amazon isnt marking their GPU prices up?
|
|
|
|
User705
Legendary
Offline
Activity: 896
Merit: 1006
First 100% Liquid Stablecoin Backed by Gold
|
|
February 12, 2014, 02:45:33 AM |
|
I'm salivating looking at all that scrypt hashing power Order got confirmed. Now to wait for tracking Hmm confusing reaction. All that scrypt hashing means less for each miner and you are salivating?
|
|
|
|
TrollboxChamp
|
|
February 12, 2014, 03:34:04 AM |
|
I'm salivating looking at all that scrypt hashing power Order got confirmed. Now to wait for tracking Hmm confusing reaction. All that scrypt hashing means less for each miner and you are salivating? More for me. I already placed my order.
|
|
|
|
velvethammer2
Member
Offline
Activity: 65
Merit: 10
|
|
February 12, 2014, 04:01:36 AM |
|
what are you USA guys using for declared value?
|
Did I Help? BTC: 1CNjvKYdqXNmkNvt87fQSRbEftxsDanV1H LTC: LWUkLNiGTwBZkgKRH3VKuLvZHGVvjmxVXZ
|
|
|
rammy2k2
Legendary
Offline
Activity: 1974
Merit: 1003
|
|
February 12, 2014, 09:40:07 AM |
|
anyone got tracking numbers yet ?
|
|
|
|
mazedk
|
|
February 12, 2014, 11:00:33 AM |
|
anyone got tracking numbers yet ?
Nope, hope to get it in the next couple days. And fingers crossed for a delivery during/after the weekend.
|
|
|
|
guyver
|
|
February 12, 2014, 11:54:55 AM |
|
im still waiting on the new firmware. these gridseeds have been inconsistent.
speeds ranging from 0.6mh - 2.5mh never been above the 3mh
|
|
|
|
rammy2k2
Legendary
Offline
Activity: 1974
Merit: 1003
|
|
February 12, 2014, 12:23:26 PM |
|
im still waiting on the new firmware. these gridseeds have been inconsistent.
speeds ranging from 0.6mh - 2.5mh never been above the 3mh
wow ... pretty unstable
|
|
|
|
screenman
Member
Offline
Activity: 112
Merit: 10
|
|
February 12, 2014, 12:47:34 PM |
|
same here, i can get 3.5mhs, but after a few hours it drops down to 1.5mhs, after unplugging & restarting its ok again for a few hours
|
|
|
|
worldlybedouin
|
|
February 12, 2014, 12:59:29 PM |
|
same here, i can get 3.5mhs, but after a few hours it drops down to 1.5mhs, after unplugging & restarting its ok again for a few hours
I wonder if that's an issue with the existing firmware? Perhaps that's part of what they're working out with the new firmware?
|
LTC: LXrAe2E6cBsK52GvUsYraeXkc2s7Ti7R5X BTC: 1FLTMqVjTZ5MTdCF4npNZGFMEUGyBV4zcj
|
|
|
guyver
|
|
February 12, 2014, 01:11:15 PM |
|
same here, i can get 3.5mhs, but after a few hours it drops down to 1.5mhs, after unplugging & restarting its ok again for a few hours
at least your getting above 3.5mh, I haven't seen my rig hit those speeds
|
|
|
|
screenman
Member
Offline
Activity: 112
Merit: 10
|
|
February 12, 2014, 01:25:07 PM |
|
i run it with --freq=750
default is --freq=600
|
|
|
|
|