gateway
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2014, 05:08:21 PM |
|
What are the instructions for running cgminer on windows with BJ attached via USB? Or at least a commandline? Is it plug and play?
I think it goes something like this. Download a flavor of linux on your windows box, use that box to burn the cd or hell put it on usb, restart your windows box with either one an install linux, then compile cgminer with hashfast driver enabled ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) sorry couldnt help my self ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Honestly I dont know but I would assume you could try the latest 3.11.x first before using zadig. Rule of thumb with any HF device that is not starting. 1. unplug the usb cable connected to the pc 2. power cycle the jet/sierra 3. plug in the usb cable (windows users might need to use zadig??) 4. fire up cgminer with default settings, it should hopefully see your device, some times it takes a few seconds
|
|
|
|
-ck
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2014, 10:08:56 PM |
|
What are the instructions for running cgminer on windows with BJ attached via USB? Or at least a commandline? Is it plug and play?
Exactly the same as every other USB device on cgminer: Start cgminer (no extra options) Plug in device, wait for windows to finish installing the driver it thinks is right, then run zadig as administrator and tell it to use the WinUSB driver for the "M1" device which is what the hashfast comes up as. cgminer should just hotplug it at that point.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
minternj
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2014, 10:32:49 PM |
|
Great info. I will probably be changing the thermal paste they use with the water cooler as well on monday. I'll post here the results from the stock temperture wise. From my experience with cpu overclocking the stock paste is usually either spread on too thick or substandard. I hope that the 4 dies are even and they aren't using thermal pads like BFL.
|
|
|
|
tacotime
Legendary
Offline
Activity: 1484
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 26, 2014, 11:13:03 PM |
|
What are the instructions for running cgminer on windows with BJ attached via USB? Or at least a commandline? Is it plug and play?
Exactly the same as every other USB device on cgminer: Start cgminer (no extra options) Plug in device, wait for windows to finish installing the driver it thinks is right, then run zadig as administrator and tell it to use the WinUSB driver for the "M1" device which is what the hashfast comes up as. cgminer should just hotplug it at that point. Thanks. When I get my BJs I will do temperature testing of the vregs at higher clocks and report back. I'll also test them out at -20C ambient temperatures (hopefully viscosity of the liquid coolant doesn't become an issue).
|
XMR: 44GBHzv6ZyQdJkjqZje6KLZ3xSyN1hBSFAnLP6EAqJtCRVzMzZmeXTC2AHKDS9aEDTRKmo6a6o9r9j86pYfhCWDkKjbtcns
|
|
|
kaerf
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2014, 12:27:01 AM |
|
FYI, the cronjob (/opt/minepeon/etc/cron.d/5min/hfupdate) on BJ sends hashfast the following info:
wallet public key internal IP address uptime cgminer options (e.g. your overclocking settings) and whatever is in /opt/minepeon/etc/hf.txt (firmware version)
|
|
|
|
Gator-hex
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2014, 12:40:29 AM |
|
FYI, the cronjob (/opt/minepeon/etc/cron.d/5min/hfupdate) on BJ sends hashfast the following info:
wallet public key internal IP address uptime cgminer options (e.g. your overclocking settings) and whatever is in /opt/minepeon/etc/hf.txt (firmware version)
So they know if you voided your warranty by overclocking it? ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) If they can send that data home they will also know your Internet IP address.
|
|
|
|
joshv06
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2014, 12:50:17 AM |
|
FYI, the cronjob (/opt/minepeon/etc/cron.d/5min/hfupdate) on BJ sends hashfast the following info:
wallet public key internal IP address uptime cgminer options (e.g. your overclocking settings) and whatever is in /opt/minepeon/etc/hf.txt (firmware version)
So they know if you voided your warranty by overclocking it? ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) If they can send that data home they will also know your Internet IP address. I'm assuming this is on the Rpi? What happens when on mine on a PC?
|
|
|
|
edgie13
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2014, 01:02:59 AM |
|
FYI, the cronjob (/opt/minepeon/etc/cron.d/5min/hfupdate) on BJ sends hashfast the following info:
wallet public key internal IP address uptime cgminer options (e.g. your overclocking settings) and whatever is in /opt/minepeon/etc/hf.txt (firmware version)
So they know if you voided your warranty by overclocking it? ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) If they can send that data home they will also know your Internet IP address. I'm assuming this is on the Rpi? What happens when on mine on a PC? You should be fine on a pc. They will only receive that info when that particular cron job runs. You can always just disable it on your PI.
|
BTC Scotch fund: 1GFZos2WGknCeVgDtjpHwo3jeJ4tSLVrXS
|
|
|
perezoso
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2014, 02:53:17 AM Last edit: January 27, 2014, 03:26:07 AM by perezoso |
|
The RPi is a toy and a piece of shit. Why anyone would run thousands of dollars worth of equipment off it is beyond me. Toss it and connect your devices to a real PC or laptop.
Trying to do exactly that with Karin's 3.11 build for Mac. Unfortunately, I'm getting a "Hashfast detect (6:3) failed to initialize (incorrect device?)" error. Update: It's hashing using 3.11 PC build. Must be a Mac driver issue.
|
|
|
|
ninjarobot
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2014, 03:01:32 AM |
|
BTW. The BJ is silent when I turn it on. There's a light on the front panel that come on, but nothing out of the fans... is this the way they behave? No fan until hashing?
Yes, the fan only turns on when the hashing starts. When I initially turned on my BJ without having properly configured the RPi the same thing happened (only the light on the BJ is on, no fans)
|
|
|
|
-ck
Legendary
Offline
Activity: 4214
Merit: 1644
Ruu \o/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2014, 03:37:08 AM |
|
The RPi is a toy and a piece of shit. Why anyone would run thousands of dollars worth of equipment off it is beyond me. Toss it and connect your devices to a real PC or laptop.
Trying to do exactly that with Karin's 3.11 build for Mac. Unfortunately, I'm getting a "Hashfast detect (6:3) failed to initialize (incorrect device?)" error. Update: It's hashing using 3.11 PC build. Must be a Mac driver issue. Never been tested on a mac. I build for linux and windows. Mac might need permissions with sudo and might need driver unloading to work.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
perezoso
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2014, 12:52:50 PM |
|
You can run it off any PC, and that's preferable anyway since the RPi is a piece of shit. Just plug in a USB cable. The sierras don't even have one so you have to run them via USB. Any instability still around is firmware related and remember it's still early days since release (even though release was late) but once my sierra is running it does not miss a beat.
Mine is happily hashing from an old mini PC desktop. Will try to resolve a driver conflict with Karin's help and get it hashing on the Mac mini later today. Interestingly, after running overnight, this BJ seems a little off-spec. It's doing about 395-7 g/hash (running cgminer 3.11). OTOH, my HW error rate is very low and with an ambient temp of 21c (70f) my processor temp is 69-70c. What did other people get for out of the box processor temps? I guess I should experiment with overclocking next... I've seen 610 mentioned... other suggestions? And sorry ckolivas, I didn't mean to suggest the Mac driver issue was your problem. It was intended merely as an observation. And finally... why don't we try to move all this operational discussion here, rather than in the other thread?
|
|
|
|
xuemike
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 116
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2014, 03:38:37 PM |
|
Has anyone had any luck reaching out to their support team? Mine came in DOA. It constantly resets in cgminer no matter which version I use. I need to get this thing RMA'ed
|
|
|
|
joshv06
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2014, 03:42:25 PM |
|
Has anyone had any luck reaching out to their support team? Mine came in DOA. It constantly resets in cgminer no matter which version I use. I need to get this thing RMA'ed
I have 12 Baby Jets coming in today. Hopefully all are good. Will report back.
|
|
|
|
NiteShdw
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 69
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2014, 05:20:40 PM |
|
cgminer 3.11, compiled from git, shows a hash rate that's almost exactly 2x what eligius shows. For example, my average hash rate according to cgminer is 830 GH/s, but eligius reports around 415 GH/s.
|
|
|
|
jspielberg
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2014, 05:25:51 PM |
|
cgminer 3.11, compiled from git, shows a hash rate that's almost exactly 2x what eligius shows. For example, my average hash rate according to cgminer is 830 GH/s, but eligius reports around 415 GH/s.
I am seeing this behavior as well. Cloned the git repo last night.
|
|
|
|
minternj
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2014, 06:15:51 PM |
|
So I took the water cooler off and there is paste all over. My OCD kicked in and a cleaned it off and spread on a thinner coat of Noctua TP on the dies. Unfortunately it didn't seem to make any temperature difference. Might try a different paste.
On another note, what difficulty is everyone using here?
|
|
|
|
xunknownx
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 62
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2014, 06:45:06 PM |
|
For those who want to update to the newest version (3.11.0) of cgminer on minepeon: After MineForeman has updated the repositories you can do the following. ssh to your pi then type: cd /opt/minepeon git pull (optional: update http gui) cd /opt/minepeon/http git pull Reboot your Pi. Reconnect to the web gui. You can then look at the "Miner Version" field and see what version of cgminer is running. Mineforeman usually waits a short period of time before updating the Minepeon repositories with the newest versions of cgminer and bfgminer. So the above instructions might not update you to cgminer version 3.11.0 yet. If you are like me and need the newest version right now, then you can compile cgminer yourself. ssh to your pi then type: wget http://ck.kolivas.org/apps/cgminer/cgminer-3.11.0.tar.bz2tar -xvf cgminer-3.11.0.tar.bz2 cd cgminer-3.11.0 ./configure --enable-hashfast make mv cgminer /opt/minepeon/bin/cgminer Reboot your Pi. Reconnect to the web gui. You can then look at the "Miner Version" field and see what version of cgminer is running. I hope this helps. I have been up for about 40 hours now. I'm on a caffeine rocket ship that is finally making it's reentry back to Earth. Please excuse me if the above post is hard to follow. I will pretty it up a bit, once I've landed. i tried the 2nd method and i'm getting this error. [minepeon@minepeon ~]$ tar -xvf cgminer-3.11.0.tar.bz2 bzip2: (stdin) is not a bzip2 file. tar: Child returned status 2 tar: Error is not recoverable: exiting now
and when i tried to do the first method with a git pull. i get permission denied [minepeon@minepeon ~]$ cd /opt/minepeon [minepeon@minepeon minepeon]$ git pull Permission denied (publickey). fatal: Could not read from remote repository.
Please make sure you have the correct access rights and the repository exists.
|
|
|
|
gateway
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 27, 2014, 06:53:39 PM |
|
[minepeon@minepeon ~]$ tar -xvf cgminer-3.11.0.tar.bz2 bzip2: (stdin) is not a bzip2 file. tar: Child returned status 2 tar: Error is not recoverable: exiting now You can try bzip2 first.. bzip2 -d cgminer-3.11.0.tar.bz2 or try tar -xzvf cgminer-3.11.0.tar.bz2
|
|
|
|
|
|