fusecavator
Member
Offline
Activity: 117
Merit: 10
|
|
February 02, 2014, 03:12:28 AM |
|
listen up and listen good, do not mine with wallet it will fork. use huntercoind to mine with the -rescan option it will take a little to resync but it works, just leave settings as they are for wallet close wallet open a cmd from the wallet directory and run huntercoind.exe -rescan, it will resync just check debug.log and you will see, after resync is done connect the miners and it will work
I tried syncing with just huntercoind a couple times, and it always just gets stuck on 2817
|
|
|
|
foodies123
|
|
February 02, 2014, 03:13:18 AM |
|
listen up and listen good, do not mine with wallet it will fork. use huntercoind to mine with the -rescan option it will take a little to resync but it works, just leave settings as they are for wallet close wallet open a cmd from the wallet directory and run huntercoind.exe -rescan, it will resync just check debug.log and you will see, after resync is done connect the miners and it will work
again this, people seem to ignore, I've posted a few pages ago and you still complain, mining on the huntcoind works, I checked the logs and the last block I found is on the block explorer so I am synched and on the right chain. ok did that and all i get is cursor blinking....huntercoind.exe --rescan it does not have output, use with single dash -rescan not double, then go to the roaming location and check the debug.log file open it see what the last lines are close it wait a few secs and open again, if there's something added to the log it's working, you should also hear your hdd working while it works, after it's finished syncing just start your miners and connect, it works just like the wallet based on the conf so if your setting were working they are still working.
|
nope
|
|
|
foodies123
|
|
February 02, 2014, 03:14:59 AM |
|
listen up and listen good, do not mine with wallet it will fork. use huntercoind to mine with the -rescan option it will take a little to resync but it works, just leave settings as they are for wallet close wallet open a cmd from the wallet directory and run huntercoind.exe -rescan, it will resync just check debug.log and you will see, after resync is done connect the miners and it will work
I tried syncing with just huntercoind a couple times, and it always just gets stuck on 2817 rpcuser=dsa rpcpassword=asd rpcconnect=127.0.0.1 rpcallowip=* rpcport=8399 server=1 listen=1 algo=scrypt
that's my conf, do not add nodes, it will chose from it's nodes. also do not open your wallet if your miners are getting work, and your huntercoind is open you are mining and you are/will be getting blocks.
|
nope
|
|
|
bitwho
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
February 02, 2014, 03:21:15 AM |
|
i'm on block 4705
is this up to date?
|
|
|
|
organizer
|
|
February 02, 2014, 03:21:37 AM |
|
Welp, I think i'm done here until things get resolved. I have tried on 3 different Windows machines (maybe those who are having luck are Linux?). These are all good computers, plenty of speed, disk space and memory (lowest is 8GB). Wallets can't synch, they get about 3/4 done and crash/freeze. Even on my gaming rig, same thing happens. On both Win 7/8, 64 bit.
If you look at the Resource Monitor when it's trying to synch, it's pretty bad... the CPU usage spikes pretty high 40-70% for me and the disk usage is absurd compared to other wallets. This thing does not seem to be tested very well on PC, at least for me these are the results. I don't see how it will be usable even if it synchs.
|
|
|
|
foodies123
|
|
February 02, 2014, 03:22:53 AM |
|
i'm on block 4705
is this up to date?
a few blocks behind.
|
nope
|
|
|
foodies123
|
|
February 02, 2014, 03:25:10 AM |
|
now ... let's assume that someone with a shitload of Gh comes into play, wouldn't he snatch all the blocks before us scrypt users can ? OP ?
|
nope
|
|
|
fusecavator
Member
Offline
Activity: 117
Merit: 10
|
|
February 02, 2014, 03:26:02 AM |
|
listen up and listen good, do not mine with wallet it will fork. use huntercoind to mine with the -rescan option it will take a little to resync but it works, just leave settings as they are for wallet close wallet open a cmd from the wallet directory and run huntercoind.exe -rescan, it will resync just check debug.log and you will see, after resync is done connect the miners and it will work
I tried syncing with just huntercoind a couple times, and it always just gets stuck on 2817 rpcuser=dsa rpcpassword=asd rpcconnect=127.0.0.1 rpcallowip=* rpcport=8399 server=1 listen=1 algo=scrypt
that's my conf, do not add nodes, it will chose from it's nodes. also do not open your wallet if your miners are getting work, and your huntercoind is open you are mining and you are/will be getting blocks. removed nodes, and now only making it to 1889. I'm just waiting for fix at this point.
|
|
|
|
foodies123
|
|
February 02, 2014, 03:27:17 AM |
|
listen up and listen good, do not mine with wallet it will fork. use huntercoind to mine with the -rescan option it will take a little to resync but it works, just leave settings as they are for wallet close wallet open a cmd from the wallet directory and run huntercoind.exe -rescan, it will resync just check debug.log and you will see, after resync is done connect the miners and it will work
I tried syncing with just huntercoind a couple times, and it always just gets stuck on 2817 rpcuser=dsa rpcpassword=asd rpcconnect=127.0.0.1 rpcallowip=* rpcport=8399 server=1 listen=1 algo=scrypt
that's my conf, do not add nodes, it will chose from it's nodes. also do not open your wallet if your miners are getting work, and your huntercoind is open you are mining and you are/will be getting blocks. removed nodes, and now only making it to 1889. I'm just waiting for fix at this point. wait for a few minutes open debug.log again see what was the last height.
|
nope
|
|
|
Darthpotatoe
Member
Offline
Activity: 271
Merit: 10
|
|
February 02, 2014, 03:30:59 AM |
|
listen up and listen good, do not mine with wallet it will fork. use huntercoind to mine with the -rescan option it will take a little to resync but it works, just leave settings as they are for wallet close wallet open a cmd from the wallet directory and run huntercoind.exe -rescan, it will resync just check debug.log and you will see, after resync is done connect the miners and it will work
I tried syncing with just huntercoind a couple times, and it always just gets stuck on 2817 rpcuser=dsa rpcpassword=asd rpcconnect=127.0.0.1 rpcallowip=* rpcport=8399 server=1 listen=1 algo=scrypt
that's my conf, do not add nodes, it will chose from it's nodes. also do not open your wallet if your miners are getting work, and your huntercoind is open you are mining and you are/will be getting blocks. removed nodes, and now only making it to 1889. I'm just waiting for fix at this point. wait for a few minutes open debug.log again see what was the last height. How quick do you find blocks?
|
|
|
|
meelvanchris
|
|
February 02, 2014, 03:31:13 AM |
|
every time i do a huntercoind -rescan, it starts to work... but after a while does little and debug log keeps showing.. InvalidChainFound: invalid block=0000000000d7a83b8fbd height=3628 work=41194473623853 InvalidChainFound: current best=0e16ed121376db2a91a4 height=3040 work=40743899024226 InvalidChainFound: WARNING: Displayed transactions may not be correct! You may need to upgrade, or other nodes may need to upgrade. ERROR: SetBestChain() : Reorganize failed ERROR: AcceptBlock() : AddToBlockIndex failed ERROR: ProcessBlock() : AcceptBlock FAILED received: block (173 bytes) received block 000000001d969d2e971a REORGANIZE So now what do i do?
|
|
|
|
fusecavator
Member
Offline
Activity: 117
Merit: 10
|
|
February 02, 2014, 03:32:41 AM |
|
now ... let's assume that someone with a shitload of Gh comes into play, wouldn't he snatch all the blocks before us scrypt users can ? OP ?
There are separate difficulties for sha256 and scrypt
|
|
|
|
|
The One
Legendary
Offline
Activity: 924
Merit: 1000
|
|
February 02, 2014, 03:38:21 AM |
|
listen up and listen good, do not mine with wallet it will fork. use huntercoind to mine with the -rescan option it will take a little to resync but it works, just leave settings as they are for wallet close wallet open a cmd from the wallet directory and run huntercoind.exe -rescan, it will resync just check debug.log and you will see, after resync is done connect the miners and it will work
I tried syncing with just huntercoind a couple times, and it always just gets stuck on 2817 rpcuser=dsa rpcpassword=asd rpcconnect=127.0.0.1 rpcallowip=* rpcport=8399 server=1 listen=1 algo=scrypt
that's my conf, do not add nodes, it will chose from it's nodes. also do not open your wallet if your miners are getting work, and your huntercoind is open you are mining and you are/will be getting blocks. removed nodes, and now only making it to 1889. I'm just waiting for fix at this point. wait for a few minutes open debug.log again see what was the last height. my latest REORGANIZE ERROR: ConnectInputsHook() : name_firstupdate on an existing name ERROR: Reorganize() : ConnectBlock failed InvalidChainFound: invalid block=9dbbe3a2054a0df0c879 height=4237 work=90094335630458 InvalidChainFound: current best=dafef952314a1baac150 height=2964 work=26348068172528 InvalidChainFound: WARNING: Displayed transactions may not be correct! You may need to upgrade, or other nodes may need to upgrade. ERROR: SetBestChain() : Reorganize failed ERROR: AcceptBlock() : AddToBlockIndex failed ERROR: ProcessBlock() : AcceptBlock FAILED received: block (173 bytes) received block fe7fb90744cd8db01f3d REORGANIZE
|
| ..................... ........What is C?......... .............. | ...........ICO Dec 1st – Dec 30th............ ............Open Dec 1st- Dec 30th............ ...................ANN thread Bounty....................
|
|
|
|
foodies123
|
|
February 02, 2014, 03:39:54 AM |
|
same ? we keep wallet.dat and hope for the best ?
|
nope
|
|
|
The One
Legendary
Offline
Activity: 924
Merit: 1000
|
|
February 02, 2014, 03:41:57 AM |
|
New blockchain or continue as usual?
|
| ..................... ........What is C?......... .............. | ...........ICO Dec 1st – Dec 30th............ ............Open Dec 1st- Dec 30th............ ...................ANN thread Bounty....................
|
|
|
|
snailbrain (OP)
Legendary
Offline
Activity: 1807
Merit: 1020
|
|
February 02, 2014, 03:45:35 AM |
|
Delete Everything in datadir except wallet.dat and huntercoin.conf, then run update
|
|
|
|
foodies123
|
|
February 02, 2014, 03:46:16 AM |
|
New blockchain or continue as usual? it's the same blockchain I was mining on since I've got all my coins intact but I think it also forks because the only blocks that are rising in the console are the ones I'm finding.
|
nope
|
|
|
fusecavator
Member
Offline
Activity: 117
Merit: 10
|
|
February 02, 2014, 03:50:54 AM |
|
Update synced fully the first time.
|
|
|
|
foodies123
|
|
February 02, 2014, 03:51:37 AM |
|
yeah but it still freezes like shit.
|
nope
|
|
|
|