[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[Helios45]

I started recently mining VTC and MONA on Mining pool Hub and noticed that while my hash rate is around 210MH/s, on mining pool hub it is keeping on fluctuating between 60 and 90 MH/s only

Is this big fluctuation normal ?

[poby]

I started recently mining VTC and MONA on Mining pool Hub and noticed that while my hash rate is around 210MH/s, on mining pool hub it is keeping on fluctuating between 60 and 90 MH/s only

Is this big fluctuation normal ?

If you using ccminer, yes it's normal as ccminer does not do well with lyra2re2.  Suggest replace with an optimised fork e.g. http://cryptomining-blog.com/9166-latest-ccminer-2-2-fork-by-nanashi-meiyo-meijin-for-monacoin-mining/

[poby]

With PPLNS penalising pool jumping, does MPH have any minimum delays before switching coins?  e.g. I'm mining lyra2re2 currently and it seems to switch between mona and vtc a lot.  Is there any way of disabling a coin?  i.e. I'd like to disable vtc for now.

[Helios45]

I started recently mining VTC and MONA on Mining pool Hub and noticed that while my hash rate is around 210MH/s, on mining pool hub it is keeping on fluctuating between 60 and 90 MH/s only

Is this big fluctuation normal ?

If you using ccminer, yes it's normal as ccminer does not do well with lyra2re2.  Suggest replace with an optimised fork e.g. http://cryptomining-blog.com/9166-latest-ccminer-2-2-fork-by-nanashi-meiyo-meijin-for-monacoin-mining/

I'm already using the optimized nanashi fork

[OdinYggd]

With PPLNS penalising pool jumping, does MPH have any minimum delays before switching coins?  e.g. I'm mining lyra2re2 currently and it seems to switch between mona and vtc a lot.  Is there any way of disabling a coin?  i.e. I'd like to disable vtc for now.

I've been told at least that it only switches off of a coin when a block is found, that way PPLNS pays out the submitted shares and avoids having losses from switching too often.

Just tried out that different ccminer version, and yes it does make a difference. 28MH/s to 29.2MH/s on my rig.

[poby]

I started recently mining VTC and MONA on Mining pool Hub and noticed that while my hash rate is around 210MH/s, on mining pool hub it is keeping on fluctuating between 60 and 90 MH/s only

Is this big fluctuation normal ?

If you using ccminer, yes it's normal as ccminer does not do well with lyra2re2.  Suggest replace with an optimised fork e.g. http://cryptomining-blog.com/9166-latest-ccminer-2-2-fork-by-nanashi-meiyo-meijin-for-monacoin-mining/

I'm already using the optimized nanashi fork

What I think is happening is the displayed hashrate gradually ramps up over 20 or 30 minutes until it plateaus.  I assume this is due to averaging.  However if your algo is switching frequently between coins, e.g. mona and vtc then you will see the displayed hashrates bob up and down without coming close to the local hashrate.  Again, I think this is just a function of the time averaging involved and it doesn't represent the actual hashrate at any given moment.

I wish there was a way of setting a delay before switching coins and even better if we could disable a particular coin from being switched to.

[poby]

With PPLNS penalising pool jumping, does MPH have any minimum delays before switching coins?  e.g. I'm mining lyra2re2 currently and it seems to switch between mona and vtc a lot.  Is there any way of disabling a coin?  i.e. I'd like to disable vtc for now.

I've been told at least that it only switches off of a coin when a block is found, that way PPLNS pays out the submitted shares and avoids having losses from switching too often.

Just tried out that different ccminer version, and yes it does make a difference. 28MH/s to 29.2MH/s on my rig.

Do you have source for this?  Can aaronsace confirm this is the case?

[sketron1]

I started recently mining VTC and MONA on Mining pool Hub and noticed that while my hash rate is around 210MH/s, on mining pool hub it is keeping on fluctuating between 60 and 90 MH/s only

Is this big fluctuation normal ?

If you using ccminer, yes it's normal as ccminer does not do well with lyra2re2.  Suggest replace with an optimised fork e.g. http://cryptomining-blog.com/9166-latest-ccminer-2-2-fork-by-nanashi-meiyo-meijin-for-monacoin-mining/

I'm already using the optimized nanashi fork

I'd watch out with the cryptomining-blog ccminer link.  Comments on the page show it comes up as virus (same for me) and people had coins stolen after using this download.

[poby]

I started recently mining VTC and MONA on Mining pool Hub and noticed that while my hash rate is around 210MH/s, on mining pool hub it is keeping on fluctuating between 60 and 90 MH/s only

Is this big fluctuation normal ?

If you using ccminer, yes it's normal as ccminer does not do well with lyra2re2.  Suggest replace with an optimised fork e.g. http://cryptomining-blog.com/9166-latest-ccminer-2-2-fork-by-nanashi-meiyo-meijin-for-monacoin-mining/

I'm already using the optimized nanashi fork

I'd watch out with the cryptomining-blog ccminer link.  Comments on the page show it comes up as virus (same for me) and people had coins stolen after using this download.

Yeah it gets virus flagged so I'm taking a risk making an exception for it.  But I think it's very likely a false positive and if it isn't I won't lose too much.  I'm seeing much better real hashrates on the site so it is definitely working better. 

[Temporel]

I started recently mining VTC and MONA on Mining pool Hub and noticed that while my hash rate is around 210MH/s, on mining pool hub it is keeping on fluctuating between 60 and 90 MH/s only

Is this big fluctuation normal ?

If you using ccminer, yes it's normal as ccminer does not do well with lyra2re2.  Suggest replace with an optimised fork e.g. http://cryptomining-blog.com/9166-latest-ccminer-2-2-fork-by-nanashi-meiyo-meijin-for-monacoin-mining/

I'm already using the optimized nanashi fork

I'd watch out with the cryptomining-blog ccminer link.  Comments on the page show it comes up as virus (same for me) and people had coins stolen after using this download.

Yeah it gets virus flagged so I'm taking a risk making an exception for it.  But I think it's very likely a false positive and if it isn't I won't lose too much.  I'm seeing much better real hashrates on the site so it is definitely working better. 

https://www.virustotal.com/#/file/5cb0f573ea02a2662bb580bcc3a8a59a4bd9df69e9683b60150dfdd8735932dd/detection

[poby]

I started recently mining VTC and MONA on Mining pool Hub and noticed that while my hash rate is around 210MH/s, on mining pool hub it is keeping on fluctuating between 60 and 90 MH/s only

Is this big fluctuation normal ?

If you using ccminer, yes it's normal as ccminer does not do well with lyra2re2.  Suggest replace with an optimised fork e.g. http://cryptomining-blog.com/9166-latest-ccminer-2-2-fork-by-nanashi-meiyo-meijin-for-monacoin-mining/

I'm already using the optimized nanashi fork

I'd watch out with the cryptomining-blog ccminer link.  Comments on the page show it comes up as virus (same for me) and people had coins stolen after using this download.

Yeah it gets virus flagged so I'm taking a risk making an exception for it.  But I think it's very likely a false positive and if it isn't I won't lose too much.  I'm seeing much better real hashrates on the site so it is definitely working better. 

https://www.virustotal.com/#/file/5cb0f573ea02a2662bb580bcc3a8a59a4bd9df69e9683b60150dfdd8735932dd/detection

Yeah that's pretty normal for legitimate miner software.  Yes it might be a virus but most likely it's a false positive as mining software is very frequently flagged as such.  Anyway, I'm happy taking the risk - enjoying the extra hashes.  YMMV.

[Temporel]

is Debit_AE the amount sent for exchange ?

[i3luefire]

Is getting paid in LTC instead of BTC a good idea ? How about other altcoins ?

TYIA

I would like to know the answer to these questions too.

[rascao]

is Debit_AE the amount sent for exchange ?

nop that is the auto pay out

Is getting paid in LTC instead of BTC a good idea ? How about other altcoins ?

TYIA

I would like to know the answer to these questions too.

well, now yes because is geting good price the ltc but its a risk as any other coin

[i3luefire]

is Debit_AE the amount sent for exchange ?

nop that is the auto pay out

Is getting paid in LTC instead of BTC a good idea ? How about other altcoins ?

TYIA

I would like to know the answer to these questions too.

well, now yes because is geting good price the ltc but its a risk as any other coin

I am mostly thinking of using LTC because it has a much lower minimum payout in dollars. and much much lower transaction fees.
I am considering ETH for some of the same reasons too.

[i3luefire]

Also. Please add these algos (Skunk,Sib,Lbry )

[Temporel]

Also. Please add these algos (Skunk,Sib,Lbry )

and PIRL

[IronMan_74]

I started recently mining VTC and MONA on Mining pool Hub and noticed that while my hash rate is around 210MH/s, on mining pool hub it is keeping on fluctuating between 60 and 90 MH/s only

Is this big fluctuation normal ?

If you using ccminer, yes it's normal as ccminer does not do well with lyra2re2.  Suggest replace with an optimised fork e.g. http://cryptomining-blog.com/9166-latest-ccminer-2-2-fork-by-nanashi-meiyo-meijin-for-monacoin-mining/

I'm already using the optimized nanashi fork

What I think is happening is the displayed hashrate gradually ramps up over 20 or 30 minutes until it plateaus.  I assume this is due to averaging.  However if your algo is switching frequently between coins, e.g. mona and vtc then you will see the displayed hashrates bob up and down without coming close to the local hashrate.  Again, I think this is just a function of the time averaging involved and it doesn't represent the actual hashrate at any given moment.

I wish there was a way of setting a delay before switching coins and even better if we could disable a particular coin from being switched to.

yes exactly this with the hashrate not showing. (this is directed in general not to you). it says right on the dashboard for each coin that the displayed hashrate is calculated based on shares submitted over the past 5 minutes. vert has a 2.5 minute block time and mona has 1.5 minutes, so assuming mph finds a block right on schedule your shares will ramp up and reset several times before it hits 5 minutes, so the calculation will never be accurate, plus if it switches between the 2 coins its going to still show old hashrate on the one coin while it ramps up on the other. anytime it takes mph awhile to find a block, aka 10+ minutes, thats when the hashrate finally starts showing accurately.

[jp1981]

so i have read people wanna to leave MPH and some people showing some tests. Is this pool ligit or are people running for the hills?

I raised my power two days ago on 19 MH/s. Instead of increasing my profits, I get less coins than before. The whole network did not grow in capacity. So it is not necessary to say here that the coin network itself is to blame for this. So the pool steals and does not act honestly. This is the coin of XZC.

for me too with zcoin. From the 9th of December the number of coins mined fell about 20-25%.

2 farms (~173mh\s and ~75mh\s) in different locations, the result is the same, the loss of 20-25% of coins

Please don't assume it's stealing. There are many reasons for losses in real pools.

So i tried your MultiPoolMiner.

Hmm, been mining Monacoin over the night and my hash rates were 68MH/s with a single 1080ti. I only used one card to test your script.
Yet the pool only reports 35MH/s. Care to share where the rest went to. Donation is switched off. Not that I wouldn't donate, but for testing purposes it was set to off. Please explain to me why I only see half the hash rates on the pool. Your script chose Palgins CCminer, but my other rigs use Nahashi and the hash rates are normal.

Also, even though I entered my username in the start bat file, there are still over 30 files that contain your workernames in them and they are being used when bench-marked.

[deg026]

somebody can explain to me where is my balance going on?
i mine BTG with autoexchange to BTC
1. i recive BTG to unconfirmed (Credited for Auto Exchange)
2. then it become confirmed
3. after that i see my balance on BTG (On Exchange)
4. AND NOW, i already 5 hours look at situation that BTG (On Exchange) = 0 and BTC - not changed,
and not have any additional information, where is my money now
are it is in the transefer now? i didnt undestood...

pls help me somebody who already undestand how it works