[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[Nooblife]

Now you can set starting difficulty value by typing like "d=0.01" at worker's password.

This would help big hash miners to catch up to its own hardware limit faster than ever.

1. Run your miner program and check your difficulty value.
    Keep in mind that difficulty value must be stabilized.
    We recommend you to get difficulty value at least after 10 minutes of mining.

2. Set this difficulty value to worker's password as "d=XXXX"
   ex) d=0.0312
   Do not write this value to miningpoolhub's worker page, just write it at miner configuration file.

3. Now run your miner program again.
   You will see your miner running at the difficulty value you typed.

4. Difficulty value can go up and down again. It's not a bug.
    d=XXX just gives us hint at start and it doesn't enforce diff value to be fixed.


Far wrong diff value may corrected automatically, but you'd better write optimized value.

Big hash miners who are using rentals, multi-algo, ASIC would get better result with difficulty hint.

Can you please give an example.

Noob.555_diff8192?     

Like this?

[1714928285]

1714928285

[1714928285]

1714928285

[1714928285]

1714928285

[navarthelol]

Hi, i'm new to MPH and I have been mining for the last ~48 hours. Hoping someone can kindly please give me some general guidance. I have 11x 1080TI on Equihash/Skein/Lyra algos profit switching with help from Nemos Miner.

Is the profitability displayed on the start script relatively accurate? My payout currency is BTC; how often does the pool payout in BTC? Is there a delay between a wallet balance having reduced to zero and the payment arriving in my BTC wallet? Are the stats on miningpoolhubstats.com concrete?

Thanks

[crushed]

Can you please give an example.

Noob.555_diff8192?     

Like this?

No. You put the difficulty setting in the password field of config settings/file for your miner. Like this:

SuperMiner --server us-east.equihash-hub.miningpoolhub.com --port 17023 --user whatever --pass d=0.01

[crushed]

Hi, i'm new to MPH and I have been mining for the last ~48 hours. Hoping someone can kindly please give me some general guidance. I have 11x 1080TI on Equihash/Skein/Lyra algos profit switching with help from Nemos Miner.

Is the profitability displayed on the start script relatively accurate? My payout currency is BTC; how often does the pool payout in BTC? Is there a delay between a wallet balance having reduced to zero and the payment arriving in my BTC wallet? Are the stats on miningpoolhubstats.com concrete?

Thanks

I would avoid payouts in BTC if possible. The fees are high and it will probably take a while to have transactions confirmed just due to network congestion. You might want to try LTC or BCH. You transactions will confirm much faster. I would not put much faith in the displayed stats.

[Kgonla]

Can you please give an example.

Noob.555_diff8192?     

Like this?

No. You put the difficulty setting in the password field of config settings/file for your miner. Like this:

SuperMiner --server us-east.equihash-hub.miningpoolhub.com --port 17023 --user whatever --pass d=0.01

I don't know on port 17023 but I tested this command on europe.equihash-hub.miningpoolhub.com ports 20570, 20575, 20594 & 20595
It is not working, you can use d=0.1 or 0.00001 or what you want, it always start at 4095H diff.

[Nooblife]

With other pools, I am used to difficulty being based on 2^n formula.  Therefore 2^13 = 8192.  2^12 = 4096

Standard format then was name.worker_diffXXXX

I am not sure what d=0.01 or d=0.0001 represents or how I would represent that with this pool for an Antminer.   

Is there an Admin here that can solve this?

Nooblife.

[espressodelisi]

Hello,

Dash lowered the transaction fees by 10x with their new version. Will you lower dash withdrawal fees too?

[anotherwave]

does anyone else have a much higher ping to us-east.equihash-hub.miningpoolhub.com and the us-east.zclassic.miningpoolhub.com servers? I was pinging around 40ms and now for the last day or so it's up to around 200ms...  Is it the server intel patch? or just the servers being overloaded? or ME!!!!??

[Kgonla]

With other pools, I am used to difficulty being based on 2^n formula.  Therefore 2^13 = 8192.  2^12 = 4096

Standard format then was name.worker_diffXXXX

I am not sure what d=0.01 or d=0.0001 represents or how I would represent that with this pool for an Antminer.   

Is there an Admin here that can solve this?

Nooblife.

If I'm not wrong 0.00x is 1/diff.
So if you want 15000 diff you enter d=0.0000666666666666

[Surfthru]

Anyone else with coins never reaching your wallet after auto-exchange>?



https://i.imgur.com/EopqDLV.png

I did an exchange from DGB to ETH.

For over a day it is showing as

Debit_AE   (confirmed)  with a Blank Payment Address and has not shown up under my ETH Wallet.

In the past it has take a few hours, now over a day. Does this mean my coins are lost in limbo or is something else going on?

[Snowmanut]

My siacoin is stuck and has not been auto exchanged even when both Bittrex and Poloniex were up. It has been 1-2 weeks and I get there is delays but is the coin not exchanging still or what can I do the get it to exchanged to
my selection etherum.

Same here. Only way to wait until Bittrex make SC wallet enabled again... It was opened for several hours, moved there and got stuck.
SC has too many problems with their code and network, not the best coin for mining...

Isn't Poloniex Siacoin exchange working? Why can't the coins be exchanged there?

[ssmokeyy]

why are we mining siacoin if its not worth anything? I have over 200 siacoin and can't exchange them but really looking up there value is crap not sure why we even mine them.

[neur0x]

These are IPS of the mining pool servers, check ping for each and choose one that works best for you


europe.equihash-hub.miningpoolhub.com         139.162.138.168
europe.equihash-hub.miningpoolhub.com         172.104.180.119
europe.equihash-hub.miningpoolhub.com           172.104.106.153
europe.equihash-hub.miningpoolhub.com           172.104.127.76
europe.equihash-hub.miningpoolhub.com         139.162.73.35
europe.equihash-hub.miningpoolhub.com         172.104.189.59


That being said, you should probably use fqdn as it will return the fastest server for your area, if I'm not mistaken.

I'm in Europe, only server under 250ms is 139.162.138.168 at 50ms for me and it's not accepting connections at the moment.

Try us-east.ethash-hub.miningpoolhub.com, it pings ~180ms  from where I'm at (East Europe)

I've been using it as a backup, i'm from Western Europe so I get ~100ms, however, I think it's getting hammered because the European servers are all messed, and miners are switching over to the us...

[Samuel111]

does anyone else have a much higher ping to us-east.equihash-hub.miningpoolhub.com and the us-east.zclassic.miningpoolhub.com servers? I was pinging around 40ms and now for the last day or so it's up to around 200ms...  Is it the server intel patch? or just the servers being overloaded? or ME!!!!??

Nope, not only you.
I had steady 43ms for the past two weeks. Left for 4 days; now back and have acceptance times in 2-5-hundreds ms also.
That is on US-East @ BTG and Equihash servers. And I think, Intel patch announcement came later than this happened/changed

[anotherwave]

does anyone else have a much higher ping to us-east.equihash-hub.miningpoolhub.com and the us-east.zclassic.miningpoolhub.com servers? I was pinging around 40ms and now for the last day or so it's up to around 200ms...  Is it the server intel patch? or just the servers being overloaded? or ME!!!!??

Nope, not only you.
I had steady 43ms for the past two weeks. Left for 4 days; now back and have acceptance times in 2-5-hundreds ms also.
That is on US-East @ BTG and Equihash servers. And I think, Intel patch announcement came later than this happened/changed

Ok thats good to know.. If its a server issue i'm sure it's being worked on and will be fixed sooner than later.

[Samuel111]

I wanted to try today MultiPoolMiner but got not-described error: "Index was out of range. Must be non-negative and less than the size of the collection". Waiting on Github for a possible solution...
So, I tried Multi-algo switch mining (Port 12XXX) different algo coins by using Hub feature,via the hub worker -- Claymore miner @ us-east-equihash-hub.miningpoolhub.com:12023 (SSL/TLS)
and after some time the miner would give first:
"...
Stratum -- reading socket failed 0, disconnect
ZEC: Connection lost, retry in 20 sec...
..."
then, the attempt to connect with the message "ZEC: Stratum -- Connected"
and then
"...
ZEC: Authorization failed
: {"id":2."result":false,"error":null}
..."
Happened few times today. Before, I was mining non-stop BTG (port 20595) for 10 days without a single error (and only 7 rejected shares). So, I am afraid to leave this switching miner on for the night; went back to a single-coin (btg).

Is it me? Or the servers' updates did do some bad service?..

[Samuel111]

does anyone else have a much higher ping to us-east.equihash-hub.miningpoolhub.com and the us-east.zclassic.miningpoolhub.com servers? I was pinging around 40ms and now for the last day or so it's up to around 200ms...  Is it the server intel patch? or just the servers being overloaded? or ME!!!!??

Nope, not only you.
I had steady 43ms for the past two weeks. Left for 4 days; now back and have acceptance times in 2-5-hundreds ms also.
That is on US-East @ BTG and Equihash servers. And I think, Intel patch announcement came later than this happened/changed

Ok thats good to know.. If its a server issue i'm sure it's being worked on and will be fixed sooner than later.

Definitely hope so. I just posted on another error I got today. Might be related, for all I know

[drwx101]

I did an exchange from DGB to ETH.

For over a day it is showing as

Debit_AE   (confirmed)  with a Blank Payment Address and has not shown up under my ETH Wallet.

In the past it has take a few hours, now over a day. Does this mean my coins are lost in limbo or is something else going on?

I had the same problem as you but it just takes a bit longer, it took about a full week for me.

When you manually try to push confirmed coins on the auto-exchange it can take a much longer time to exchange them then regular direct auto-exchanges that arent pushed manually from your balance, so beware of that if you want to push confirmed coins on your balance into auto-exchange to exchange them for another crypto.
Miningpoolhub settles everything eventually so you just have to wait basically, it can take up to one day to about a week to exchange them.

It is something Miningpoolhub might be able to improve in the future to speed up auto-exchange orders that are pushed on the exchange manually but for now it just takes a bit longer sometimes,
however it does work and Miningpoolhub does settle the balances eventually.

I agree with the other users that said no pool is perfect and from all the pools I tested Mininpoolhub is one of the better and reliable ones, I think if Miningpoolhub speeds up manual auto-exchange and limits customer funds getting stuck to a day or so at maximum and not a week and ups their customer support a bit they can really give most other pools a run for their money in terms of speed, functionality, reliability. and availability

[jkminkov]

Anyone knows if ETN is working for auto-switch on cryptonight? Only monero shows a port.

it won't switch, because cryptopia is not one of the three exchanges that pool uses.

[Marvell2]

please add verge for verge for blake2b for upcomming A2 and also verge-groestl for the X10

we are losing alot a profitablity missing verge