[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[felixbrucker]

Currently ETN doesn't add your mined coins to autoexchange wallet but to regular wallet.

Additionally at least ETN displays

Code:

profit: 0

in https://miningpoolhub.com/index.php?page=api&action=getminingandprofitsstatistics

Hope all this can be fixed soon

[1714797814]

1714797814

[1714797814]

1714797814

[1714797814]

1714797814

[usernamechooden]

hey @Miningpoolhub, been with you for about 3 months now and so far no complains. But lately within my profits on equihash getting lower day to day I started looking around for some neoscrypt coins, as whattomine suggested could be more profitable. I found zpool pretty considerable and if nothing changes in a few days I think I would switch to. Are you guys at @miningpoolhub plan to cover a neoscrypt a little bit wider in the future (GBX, INN, VIVO)? Would be great if so!!

[GPUaddict]

Hi guys! 

Would anyone be kind enough to explain to me how this is happening?

I am currently having a prob with MPH:
-  When I point 1-3 rigs to my hub worker in MPH, my end of day payout is as it should
-  When I point additional 1-3 rigs to the same or different hub worker in MPH, the earnings of the additional rigs are no longer calculated.
*All under 1 account in MPH

So in effect, it's just as if I'm mining from 1-3 rigs worth of earnings even if I have double that pointed at MPH.

Is there a work around this so that all rigs generate / mine at MPH?

[Cyan_Antares]

Has anyone managed to make Cast XMR work on MultiPoolMiner? Because the only way I managed to get the benchmark done at least was to isolate everything else by only choosing Cryptonight as an algorithm, which kinda defeats the purpose

[dmshel]

Hi all. I try mining at zcash. But see diff is low at zcash. Prefix at password line not working (d=256)
How i can use hight speed at zcash?

[Biggen1]

@Biggen1 Another day (I tested whole last week and always mining only zcash was more or equally profitable than MPH. A month ago MPH was better 10-20% than any single mining):

1. ZCASH nanopool: 0,04246335 ZEC
2. MPH + nplus 1.3.1: 0,03636484 ZEC


Now its 15% worse result. Still I am running test on 2 other rigs for 7 days but Im pretty sure the results will be the same. You can check by yourself if you dont believe me (that would be even better - bigger sample).

I have no other way to test other than comparing my payouts vs what whattomine.com says I should get every 24 hours. Since I exceed that just about on a daily basis, I have to conclude that MPH is working fine for me.

/shrugs

[Captmario]

Hello,

There is something wrong with ETN block rewards right now.
After Block # 172377, there was an Orphan block with some error and any subsequent blocks have no rewards being distributed. No ETN is now being distributed among miners (or atleast me) as i can't see anything credited in transactions menu anymore.

Can you please look into this?

[luunguyenbk]

Website: http://miningtrack.com/

Hi everyone,

We've created a new page for tracking on miningpoolhub.com, zpool.ca, just simple input an API key/ Wallet and you can monitor your workers mining.
Many features, pool, application will release soon.

Any suggestions, please send to our email: luunguyenbk@gmail.com

Thank you for all

[GPUaddict]

Website: http://miningtrack.com/

Hi everyone,

We've created a new page for tracking on miningpoolhub.com, zpool.ca, just simple input an API key/ Wallet and you can monitor your workers mining.
Many features, pool, application will release soon.

Any suggestions, please send to our email: luunguyenbk@gmail.com

Thank you for all

Hi luunguyenbk! Thank you for the link.

I have 6 rigs pointed at mph now with 1 different worker each. Url is connected via the algo switching port. The tracker only shows 1 worker active and with half the hash rate.

Is there anything I'm missing as to why my other workers aren't showing on the stats page?

[luunguyenbk]

Website: http://miningtrack.com/

Hi everyone,

We've created a new page for tracking on miningpoolhub.com, zpool.ca, just simple input an API key/ Wallet and you can monitor your workers mining.
Many features, pool, application will release soon.

Any suggestions, please send to our email: luunguyenbk@gmail.com

Thank you for all

Hi luunguyenbk! Thank you for the link.

I have 6 rigs pointed at mph now with 1 different worker each. Url is connected via the algo switching port. The tracker only shows 1 worker active and with half the hash rate.

Is there anything I'm missing as to why my other workers aren't showing on the stats page?

Hi,

If you're using auto algo switching, some coin won't report your workers, you can check on https://miningpoolhub.com/.
Hashrate sometime is higher or lower than your mining tool but the average hashrate will be correct.

[GPUaddict]

Hi,

If you're using auto algo switching, some coin won't report your workers, you can check on https://miningpoolhub.com/.
Hashrate sometime is higher or lower than your mining tool but the average hashrate will be correct.

Thank  you very much for your reply.  I am only using 1 algo - Equihash.  

Rig 1 --> Worker 1 on MPH
Rig 2 --> Worker 2 on MPH
Rig 3 --> Worker 3 on MPH
Rig 4 --> Worker 4 on MPH
Rig 5 --> Worker 5 on MPH
Rig 6 --> Worker 6 on MPH
All on Equihash only.

Profit switching is within the algo only among the coins.

[CryptAtomeTrader44]

Hi all. I try mining at zcash. But see diff is low at zcash. Prefix at password line not working (d=256)
How i can use hight speed at zcash?

I think you can try this miner :  XMR-STAK
https://github.com/fireice-uk/xmr-stak/releases (the more efficient and the less weitght but really polyvalent.

Or try this OS for multialgo profit-switching (nvOC)

https://bitcointalk.org/index.php?topic=1854250.7440

[fkjnfndjn]

I see this as well, and have emailed contact@miningpoolhub.com about it.

Hello,

There is something wrong with ETN block rewards right now.
After Block # 172377, there was an Orphan block with some error and any subsequent blocks have no rewards being distributed. No ETN is now being distributed among miners (or atleast me) as i can't see anything credited in transactions menu anymore.

Can you please look into this?

[malthrax]

Hi guys!
Maybe someone can help me with new Verge-Scrypt(XVG) Pool.
How to config it correctly?

Claymore's works fine but I can't see that my worker is active and I did't get coins.
I created worker on pool and name it "dimahadgi.3" and set it to config file.
My config file:

Code:

# ----------------- ETHERIUM ------------------
-epool europe.ethash-hub.miningpoolhub.com:20536
-ewal x
-esm 1
-eworker dimahadgi.1
-epsw x
-allpools 1
# ----------------- Verge-Scrypt ------------------
-dpool stratum+tcp://hub.miningpoolhub.com:20523
-dwal dimahadgi.3
-dpsw x
-dcoin blake2s

Maybe I am wrong?

BLAKE2S is not the same as SCRYPT

MiningPoolHub DOES NOT HAVE blake2s algo support.

[GPUaddict]

Hi guys!
Maybe someone can help me with new Verge-Scrypt(XVG) Pool.
How to config it correctly?

Claymore's works fine but I can't see that my worker is active and I did't get coins.
I created worker on pool and name it "dimahadgi.3" and set it to config file.
My config file:

Code:

# ----------------- ETHERIUM ------------------
-epool europe.ethash-hub.miningpoolhub.com:20536
-ewal x
-esm 1
-eworker dimahadgi.1
-epsw x
-allpools 1
# ----------------- Verge-Scrypt ------------------
-dpool stratum+tcp://hub.miningpoolhub.com:20523
-dwal dimahadgi.3
-dpsw x
-dcoin blake2s

Maybe I am wrong?

BLAKE2S is not the same as SCRYPT

MiningPoolHub DOES NOT HAVE blake2s algo support.

Sorry, I thought that Verge-Scrypt(XVG) and Verge-Blake (2s)(XVG) are the same. Looks like same coin but different algo.
whatever Thank you

That is ok.  We learn from our mistakes.  So no worries. 

Have you tried using AwesomeMiner with MPH?  Setup is easier or should I say less chances of making these mistakes.  Then you can move on to the more manual miners later.

[Mandeep148]

Guys, its been month im getting this issue, no one helping me,
i want to request humbly please help me on this,
im getting issue with skein and neoscript, im using awesome miner with auto Managed profit Miner setup by adding miningpoolhub workername. i tried to disable firewall/defender, but nothing worked for me, i also tried to update worker job from my miningpoolhub account too.. please help me. pic is also attached https://postimg.org/image/udcf1kf8r/

[nazzer]

Guys, its been month im getting this issue, no one helping me,
i want to request humbly please help me on this,
im getting issue with skein and neoscript, im using awesome miner with auto Managed profit Miner setup by adding miningpoolhub workername. i tried to disable firewall/defender, but nothing worked for me, i also tried to update worker job from my miningpoolhub account too.. please help me. pic is also attached https://postimg.org/image/udcf1kf8r/

Maybe you should ask support from the Awesome Miner?

Defender instructions:
http://www.awesomeminer.com/help/defender.aspx


Bitcointalk thread for Awesome Miner:
https://bitcointalk.org/index.php?topic=676942.0

[ZombieWorm]

Guys I need help, on MPH I set automatic payment to my bittrex wallet yesterday. When the value triggered it left the wallet. It has not arrived in my bittrex and 7+ hours has gone by now. I have checked the wallet address ten times, any ideas where to start?

[GPUaddict]

Guys, its been month im getting this issue, no one helping me,
i want to request humbly please help me on this,
im getting issue with skein and neoscript, im using awesome miner with auto Managed profit Miner setup by adding miningpoolhub workername. i tried to disable firewall/defender, but nothing worked for me, i also tried to update worker job from my miningpoolhub account too.. please help me. pic is also attached https://postimg.org/image/udcf1kf8r/

Hi there.  It seems like your Windows Defender is not allowing AM to download your miner.  You can Google some tips on how to  configure AM with Windows 10.

[nazzer]

Guys I need help, on MPH I set automatic payment to my bittrex wallet yesterday. When the value triggered it left the wallet. It has not arrived in my bittrex and 7+ hours has gone by now. I have checked the wallet address ten times, any ideas where to start?

Check the transaction - look up the transaction on a blovkchain explorer