[ANN] YACMiner - AMD GPU miner for Scrypt-Chacha, N-Scrypt, and Scrypt coins

[hieu1010]

Hello , YACMiner has a bug . When I switch pool (use Key P + S + pool) , N Factor will auto change to 16 .  Backup pool can't run correctly . Please fix it.

[1714806126]

1714806126

[1714806126]

1714806126

[devlin]

Hello , YACMiner has a bug . When I switch pool (use Key P + S + pool) , N Factor will auto change to 16 .  Backup pool can't run correctly . Please fix it.

Is not a bug, use  --nfmin  --nfmax  --starttime for each pool

[hieu1010]

Is not a bug, use  --nfmin  --nfmax  --starttime for each pool

Thanks  . It's ok

[Thirtybird]

Hello , YACMiner has a bug . When I switch pool (use Key P + S + pool) , N Factor will auto change to 16 .  Backup pool can't run correctly . Please fix it.

I don't think YACMiner is actively developed anymore...

Correct, but I'm still here if something if hugely wrong...

Hello , YACMiner has a bug . When I switch pool (use Key P + S + pool) , N Factor will auto change to 16 .  Backup pool can't run correctly . Please fix it.

Is not a bug, use  --nfmin  --nfmax  --starttime for each pool

agreed - these are set for each pool you specify

[hieu1010]

Hi , I'm mining scrypt jane N Factor =14
6970 speed 4.7 khs (core/mem 900/400)
7950 speed 4.2 khs (core/mem 1000/400)
Who can explain why 6970 run faster than 7950?

[Thirtybird]

Hi , I'm mining scrypt jane N Factor =14
6970 speed 4.7 khs (core/mem 900/400)
7950 speed 4.2 khs (core/mem 1000/400)
Who can explain why 6970 run faster than 7950?

Post your configs for each - SC N=14 is memory intensive, so the faster GPU doesn't always win.  Also, you may be having hardware errors you didn't mention (or notice)

[felix18yu]

hello..
have someone good  setup for sapphire 280x vapor-x for yacminer..
or some miner for scrypt-jane

Thanks

[soowein]

hello..
have someone good  setup for sapphire 280x vapor-x for yacminer..
or some miner for scrypt-jane

Thanks

And me with the same question !

Thank you so much !

[meocon966]

Hello...
Anyone have config for r9 270...
 I only get 2.6KHz per card with this config :
--scrypt-chacha --worksize 128 -g 1 --lookup-gap 8 --buffer-size 1648 -R 3200

[meocon966]

Assuming you're at stock clocks, you expect more?

I run with 1100- 1500 .
I think it have a litte speed when compare with 7950 and r9 280x. Speed should be ~ 3-3.5kh .

[hieu1010]

r9 270 - 3.17 Kh/s - core/mem 1150/500
7950  - 5.03 Kh/s - core/mem 1120/500

using kernel mod , bought from platinum4.

[lmaonade80]

r9 270 - 3.17 Kh/s - core/mem 1150/500
7950  - 5.03 Kh/s - core/mem 1120/500

using kernel mod , bought from platinum4.

https://www.dropbox.com/s/wrc47a0u5lp8qm3/yacminer.jpg?dl=0

Link broken

[Thirtybird]

Hey dudes,
What are you still mining that is NF-14 ??
 

LEOCoin is the only coin at NF=14 I know about

[Thirtybird]

OK Wolf0 I agree:
Weren't LEO developers, revealed to be lying?

No clue - I've barely heard of the coin.

Whether it is or isn't I couldn't tell you, but they've made some very bold statements that I chuckled at.  People are mining it though, and the top 15 at the official pool have a combined  reported 3,500 KHash/sec right now.  If a decent card pulls 5 KH/sec, that's 700 GPUs in the top 15 at one pool...

[Grim]

OK Wolf0 I agree:
Weren't LEO developers, revealed to be lying?

No clue - I've barely heard of the coin.

Whether it is or isn't I couldn't tell you, but they've made some very bold statements that I chuckled at.  People are mining it though, and the top 15 at the official pool have a combined  reported 3,500 KHash/sec right now.  If a decent card pulls 5 KH/sec, that's 700 GPUs in the top 15 at one pool...

The hashrate thrown at it is mind boggling 

[leopool]

Hello , YACMiner has a bug . When I switch pool (use Key P + S + pool) , N Factor will auto change to 16 .  Backup pool can't run correctly . Please fix it.

this works, doesnt change to nf16. use starttime with pool, not below where gpu paramethers are.

"pools" : [
   {
      "url" : "stratum+tcp://leopool.org:3333",
      "nfmin" : "4",
      "nfmax" : "30",
      "starttime" : "1402845776",
      "user" : "user.worker",
      "pass" : "x"
   },
   {
      "url" : "stratum+tcp://leopool.net:3333",
      "nfmin" : "4",
      "nfmax" : "30",
      "starttime" : "1402845776",
      "user" : "user.worker",
      "pass" : "x"
   }
]
,
"rawintensity" : "",
"worksize" : "",
"kernel" : "scrypt-chacha",
"lookup-gap" : "",
"buffer-size" : "",
"gpu-threads" : "1",
"gpu-engine" : "",
"gpu-memclock" : "",
"gpu-powertune" : "",
"auto-fan" : true,
"temp-cutoff" : "",
"temp-overheat" : "",
"temp-target" : "",
"no-submit-stale" : true,
"expiry" : "1",
"queue" : "0",
"scan-time" : "1",
"scrypt-chacha" : true
}

[qwep1]

someone has settings for 280x me alone HW

[anhpt192]

Hello , YACMiner has a bug . When I switch pool (use Key P + S + pool) , N Factor will auto change to 16 .  Backup pool can't run correctly . Please fix it.

this works, doesnt change to nf16. use starttime with pool, not below where gpu paramethers are.

"pools" : [
   {
      "url" : "stratum+tcp://leopool.org:3333",
      "nfmin" : "4",
      "nfmax" : "30",
      "starttime" : "1402845776",
      "user" : "user.worker",
      "pass" : "x"
   },
   {
      "url" : "stratum+tcp://leopool.net:3333",
      "nfmin" : "4",
      "nfmax" : "30",
      "starttime" : "1402845776",
      "user" : "user.worker",
      "pass" : "x"
   }
]
,
"rawintensity" : "",
"worksize" : "",
"kernel" : "scrypt-chacha",
"lookup-gap" : "",
"buffer-size" : "",
"gpu-threads" : "1",
"gpu-engine" : "",
"gpu-memclock" : "",
"gpu-powertune" : "",
"auto-fan" : true,
"temp-cutoff" : "",
"temp-overheat" : "",
"temp-target" : "",
"no-submit-stale" : true,
"expiry" : "1",
"queue" : "0",
"scan-time" : "1",
"scrypt-chacha" : true
}

Can you explain meaning of "starttime" with value of "1402845776"?

[jjiimm_64]

Thirtybird,

  Thank you for doing the work on this miner.. I have been using cgminer-3.7.2-sj-0.03 for the last week because I could not get yours going at first.  Now I have it running finally.

however, I will have a hard time monitoring all my rigs because the rpc response does not give the speed of the card.  

here is a dump of yacminer json response for one dev;

Code:

  [DEVS] => Array
        (
            [0] => Array
                (
                    [GPU] => 0
                    [Enabled] => Y
                    [Status] => Alive
                    [Temperature] => 68
                    [Fan Speed] => 1540
                    [Fan Percent] => 30
                    [GPU Clock] => 1000
                    [Memory Clock] => 1250
                    [GPU Voltage] => 1.25
                    [GPU Activity] => 99
                    [Powertune] => 0
                    [MHS av] => 0
                    [MHS 5s] => 0
                    [Accepted] => 0
                    [Rejected] => 0
                    [Hardware Errors] => 0
                    [Utility] => 0
                    [Intensity] => 0
                    [Last Share Pool] => -1
                    [Last Share Time] => 0
                    [Total MH] => 0.1129
                    [Diff1 Work] => 1
                    [Difficulty Accepted] => 0
                    [Difficulty Rejected] => 0
                    [Last Share Difficulty] => 0
                    [Last Valid Work] => 1430008859
                )

I had trouble with with cgminer-3.7.2-sj-0.03 version at first because it also reports 0 Mh as yours does. However, I was able to calculate speed in the following by dividing the  [Total MH] by [Device Elapsed]

json dump of cgminer-3.7.2-sj-0.03

Code:

 [3] => Array
                (
                    [GPU] => 3
                    [Enabled] => Y
                    [Status] => Alive
                    [Temperature] => 72
                    [Fan Speed] => 1880
                    [Fan Percent] => 35
                    [GPU Clock] => 1000
                    [Memory Clock] => 1400
                    [GPU Voltage] => 1.25
                    [GPU Activity] => 99
                    [Powertune] => 0
                    [MHS av] => 0
                    [MHS 5s] => 0
                    [Accepted] => 2
                    [Rejected] => 0
                    [Hardware Errors] => 0
                    [Utility] => 0
                    [Intensity] => D
                    [Last Share Pool] => 2
                    [Last Share Time] => 1429778772
                    [Total MH] => 94.5894
                    [Diff1 Work] => 1409
                    [Difficulty Accepted] => 5014.3073666
                    [Difficulty Rejected] => 0
                    [Last Share Difficulty] => 2524.72717333
                    [Last Valid Work] => 1430012182
                    [Device Hardware%] => 0
                    [Device Rejected%] => 0
                    [Device Elapsed] => 342676
                )

If you could add the Device Elapsed to the dev call, or better yet the MHS av and MHS 5s, that would be awsome... and a tip of course would be included.

if cachecoin catches on, your miner could quickly become very popular and I am sure others would appreciate being able to monitor the rigs remotely.

Jim


edit:
  I starting using the miners summary elapsed time to guestimate the card speeds...  the raw intensity and other very important chacha settings are also not in the json

I am still trying to tune...  it is difficult to get ZERO HW errors..  seams like as soon as I go faster than about 700h i get errors after a few minutes

currently:

"rawintensity" : "1536",
"buffer-size" : "1856",  
"lookup-gap" : "8",
"gpu-engine" : "1000",
"gpu-memclock" : "1250",
"gpu-threads" : "1",
"worksize" : "64",

Code:

cgminer version r 3.5.0-yac2 - Started: [April 25, 2015, 9:40 pm]    Rig:miner7
miner7
(5s):2.206  (avg): 2.206 Kh/s  |    H: 106.25  Q:122   A:0   R:1   HW:0   E:?%   U:0/m
TQ:?   ST:0   SS:?   DW:0   NB:1   LW:4   GF:0   RF:0   BS:13
Connected to http://127.0.0.1:2224 without LP as jimbit
Value:
GPU 0:	75.0C	2004RPM 	37% 	112	| 0.557/0.0Mh/s | 	99% |	1000Mhz 	1250Mhz 	1.25V 	A:0	R:0	HW:0	U:0.00/m 	I: 0
GPU 1:	71.0C	1629RPM 	30% 	101	| 0.557/0.0Mh/s | 	99% |	1000Mhz 	1250Mhz 	1.25V 	A:0	R:0	HW:0	U:0.00/m 	I: 0
GPU 2:	74.0C	1606RPM 	32% 	106	| 0.546/0.0Mh/s | 	99% |	1000Mhz 	1250Mhz 	1.25V 	A:0	R:1	HW:0	U:0.00/m 	I: 0
GPU 3:	74.0C	1624RPM 	32% 	106	| 0.546/0.0Mh/s | 	99% |	1000Mhz 	1250Mhz 	1.25V 	A:0	R:0	HW:0	U:0.00/m 	I: 0

as a comparison, here is cgminer:

Code:

cgminer version 3.7.2 - Started: [April 22, 2015, 10:50 am]    Rig:miner1
miner1
(5s):1.112  (avg): 1.113 Kh/s  |    H: 95.75  Q:55258   A:124   R:1   HW:0   E:?%   U:0.02/m
TQ:?   ST:0   SS:?   DW:4667   NB:400   LW:2249   GF:492   RF:0   BS:2125
Connected to http://127.0.0.1:2224 without LP as jimbit
Value:
GPU 0:	69.0C	1566RPM 	30% 	99	| 0.278/0.0Mh/s | 	99% |	1000Mhz 	1250Mhz 	1.25V 	A:23	R:0	HW:0	U:0.00/m 	I: D
GPU 1:	66.0C	1595RPM 	30% 	96	| 0.278/0.0Mh/s | 	99% |	1000Mhz 	1250Mhz 	1.25V 	A:36	R:0	HW:0	U:0.01/m 	I: D
GPU 2:	72.0C	1481RPM 	30% 	102	| 0.278/0.0Mh/s | 	99% |	1000Mhz 	1250Mhz 	1.25V 	A:40	R:1	HW:0	U:0.01/m 	I: D
GPU 3:	56.0C	1457RPM 	30% 	86	| 0.278/0.0Mh/s | 	99% |	1000Mhz 	1250Mhz 	1.25V 	A:25	R:0	HW:0	U:0.01/m 	I: D

[uplodex]

Hi,

there is not a solution of CPU mining "windows 7" for CACHeCoin?