IchibahnSLC
|
|
March 09, 2014, 05:29:28 PM |
|
I think cgminer has a display error with the HW. Seems to me that on my 2 seed setup only 1 card gets HW even though they are on the same speeds and power supply. I can't think of another reason. Cgminer might be displaying pool disconnects as HW because I am on a multicoin pool. I remember that on my GPU rigs it would sometimes mix the temps up.
|
|
|
|
BrandonMcPherson
|
|
March 09, 2014, 10:59:20 PM |
|
I had to start over from scracth after a week of successful hashing, and I ran into a problem I don't remember encountering. When I get to miaviator's instruction to run the command ./autogen.sh in the cgminer directory, I get this error: bash: ./autogen.sh: No such file or directory As I said, I don't remember encountering that before. I'm a Mac guy installing Linux (Ubuntu 13.0.4) in Parallels, so speak slowly.
|
|
|
|
wsirianni1
Newbie
Offline
Activity: 7
Merit: 0
|
|
March 09, 2014, 11:38:59 PM |
|
if i connect 10 gridseeds to a usb hub will it show up on cgminer as 10 individual miners? and does anyone think in the future they will hit 500 khs without the lightning asic controller firmware? as in just the cgminer run on windows?
|
|
|
|
workshop35
Newbie
Offline
Activity: 38
Merit: 0
|
|
March 10, 2014, 12:15:30 AM |
|
I had to start over from scracth after a week of successful hashing, and I ran into a problem I don't remember encountering. When I get to miaviator's instruction to run the command ./autogen.sh in the cgminer directory, I get this error: bash: ./autogen.sh: No such file or directory As I said, I don't remember encountering that before. I'm a Mac guy installing Linux (Ubuntu 13.0.4) in Parallels, so speak slowly. "chmod +x autogen.sh" should fix it I think
|
|
|
|
BrandonMcPherson
|
|
March 10, 2014, 12:24:29 AM |
|
Thanks, workshop35. I don't have an autogen.sh file to change permissions on, though.
|
|
|
|
suchmoon
Legendary
Offline
Activity: 3724
Merit: 8996
https://bpip.org
|
|
March 10, 2014, 12:28:44 AM |
|
I think cgminer has a display error with the HW. Seems to me that on my 2 seed setup only 1 card gets HW even though they are on the same speeds and power supply. I can't think of another reason. Cgminer might be displaying pool disconnects as HW because I am on a multicoin pool. I remember that on my GPU rigs it would sometimes mix the temps up.
Probably related: https://bitcointalk.org/index.php?topic=482352.msg5593751#msg5593751
|
|
|
|
miaviator (OP)
Donator
Hero Member
Offline
Activity: 686
Merit: 519
It's for the children!
|
|
March 10, 2014, 12:29:33 AM |
|
Thanks, workshop35. I don't have an autogen.sh file to change permissions on, though.
Just skip autogen if you don't have it
|
|
|
|
Wings1987
|
|
March 10, 2014, 12:33:24 AM |
|
Hoping someone can help with a power question.
I have 2 miners that I have been fooling with for the last week. Both are hooked up to individual power adapters that I ordered from Ebay.
40 more miners are on the way and my plan is to purchase cables from Cablez and cases from Spotswood which should give me a clean setup. Until those items are available I am left with the barrel connectors that come with the kit. (from Zoomhash btw) I have a few 750w modular power supplies here and if I understand previous posts one should power all 40 in Scrypt only mode. I can't seem to find a picture of the barrel connectors and I am not sure the best way to get everything hooked up and running in the mean time. I have some Pcie 6 pin to molex adapters here and thought that might be the way to go.
A picture of what someone else has done would be a huge help.
Thanks
|
|
|
|
BrandonMcPherson
|
|
March 10, 2014, 12:38:26 AM |
|
Thanks, workshop35. I don't have an autogen.sh file to change permissions on, though.
Just skip autogen if you don't have it Thanks, miaviator. Was able to configure and make it just fine.
|
|
|
|
richmke
|
|
March 10, 2014, 01:18:53 AM |
|
I determined that 10 miners increased the a/c power draw of my usb hub by 5 watts. So, each USB port should be able to provide .5 watts per usb port, or 1 amp for 10 miners.
|
|
|
|
BrandonMcPherson
|
|
March 10, 2014, 02:29:23 AM |
|
Has anyone encountered a solid red LED on the Gridseed device? Stays on for a minute, then off a minute, then on a minute. The green LED flashes the whole time. I was hashing for a week, and there haven't been any changes in power supply or USB.
|
|
|
|
daddyfatsax
|
|
March 10, 2014, 03:01:35 AM |
|
Everything has been going great. Clocked the units to 900 and now my pool is showing a lot different speed than cgminer. Pool is only showing 5.2 MH/s. I guess just put them back to 850?
|
|
|
|
smtn512
Newbie
Offline
Activity: 34
Merit: 0
|
|
March 10, 2014, 03:22:03 AM |
|
FYI: $232.94 shipped for a gridseed from ZoomHash with Discount Code UnicornHasher (The discount box is on step 2 of 2 after you enter your shipping info) https://i.imgur.com/y2Rn0JEm.pngNOW I find this >.<
|
|
|
|
chanberg
|
|
March 10, 2014, 04:16:17 AM |
|
Everything has been going great. Clocked the units to 900 and now my pool is showing a lot different speed than cgminer.
Pool is only showing 5.2 MH/s. I guess just put them back to 850?
man you got a crap ton of hardware errors.... I have like 2 or 3 errors in the past 3 days on my RPi running 20 units Danny
|
|
|
|
IchibahnSLC
|
|
March 10, 2014, 04:26:42 AM |
|
Everything has been going great. Clocked the units to 900 and now my pool is showing a lot different speed than cgminer.
Pool is only showing 5.2 MH/s. I guess just put them back to 850?
man you got a crap ton of hardware errors.... I have like 2 or 3 errors in the past 3 days on my RPi running 20 units Danny Same clock? I'm in a similar situation and kinda wonder what to do or if I should blame cgminer. Lol
|
|
|
|
daemonfox
|
|
March 10, 2014, 05:03:57 AM |
|
Everything has been going great. Clocked the units to 900 and now my pool is showing a lot different speed than cgminer.
Pool is only showing 5.2 MH/s. I guess just put them back to 850?
man you got a crap ton of hardware errors.... I have like 2 or 3 errors in the past 3 days on my RPi running 20 units Danny Same clock? I'm in a similar situation and kinda wonder what to do or if I should blame cgminer. Lol Not cgminer... its the ASIC itself... not hardware wise either... i believe it to be firmware related. I get the same thing at 900... high hashrate locally... shit at the pool... you can watch share speed to see it is WAY slower to find shares compared to 850... that is not a hardware issue at all... that is flimsy firmware that needs to be updated.
|
|
|
|
BrandonMcPherson
|
|
March 10, 2014, 05:17:36 AM |
|
Have the folks with multiple units encountered one that's not recognized by the software and has a solid red LED?
|
|
|
|
IchibahnSLC
|
|
March 10, 2014, 05:19:30 AM |
|
Everything has been going great. Clocked the units to 900 and now my pool is showing a lot different speed than cgminer.
Pool is only showing 5.2 MH/s. I guess just put them back to 850?
man you got a crap ton of hardware errors.... I have like 2 or 3 errors in the past 3 days on my RPi running 20 units Danny Same clock? I'm in a similar situation and kinda wonder what to do or if I should blame cgminer. Lol Not cgminer... its the ASIC itself... not hardware wise either... i believe it to be firmware related. I get the same thing at 900... high hashrate locally... shit at the pool... you can watch share speed to see it is WAY slower to find shares compared to 850... that is not a hardware issue at all... that is flimsy firmware that needs to be updated. Have any of you guys updated the firmware? Idk if an update is even out. Also my unit that is having issues has a more uneven heatsink then the other. Might be an issue as well.
|
|
|
|
workshop35
Newbie
Offline
Activity: 38
Merit: 0
|
|
March 10, 2014, 05:35:11 AM |
|
Everything has been going great. Clocked the units to 900 and now my pool is showing a lot different speed than cgminer.
Pool is only showing 5.2 MH/s. I guess just put them back to 850?
man you got a crap ton of hardware errors.... I have like 2 or 3 errors in the past 3 days on my RPi running 20 units Danny what usb hubs are you using?
|
|
|
|
chanberg
|
|
March 10, 2014, 05:37:27 AM |
|
Everything has been going great. Clocked the units to 900 and now my pool is showing a lot different speed than cgminer.
Pool is only showing 5.2 MH/s. I guess just put them back to 850?
man you got a crap ton of hardware errors.... I have like 2 or 3 errors in the past 3 days on my RPi running 20 units Danny what usb hubs are you using? I am using those 60 dollar anker hubs... Might be the reason
|
|
|
|
|