[ANN] The First Litecoin PPS Pool (litecoinpool.org)

[flippintwit]

Doh! My mistake, I left the pool off the litecoinpool address of the first email. Resent.

[1714599922]

1714599922

[1714599922]

1714599922

[1714599922]

1714599922

[flippintwit]

My issue was resolved and I'm back into my account.  Thank you Pooler!

[Welsyntoffie]

Good day to you all.
I am thinking of buying an Antminer L3++. Many pools have different end results for profit calculation.
Litecoinpool.org seems to be the highest when it comes to profit.
So when I buy the L3++, litecoinpool.org will become my home.
My question is how close to the estimated profits will I get?
I live in South Africa so the closest pool address is Europe, latency is about less than 400ms. (Will this effect the profits?)
Is the L3++ (2018 model) still profitable?
Anyone else using L3++?

[kidokg]

Hi all!

I make simple and free iOS app for view litecoinpool account.
https://apps.apple.com/ru/app/litecoinpool-monitor/id1561178275

[faheshang]

Dogecoin thru the roof, will we see a jump in PPS?

Of course. We're at 185% PPS now. Is this a record for the pool?

[Fenboy]

Dogecoin thru the roof, will we see a jump in PPS?

Of course. We're at 185% PPS now. Is this a record for the pool?

305% must be a record

[cmanmatt]

I can't get a new Goldshell LT5 to work on the pool. It says the pool is invalid. I can get it to work on other pools. Have you looked at the LT5 compatibility on the pool?

It seems unlikely that this is a compatibility issue, since connection and authentication are quite straightforward in the Stratum protocol.
If it says that the pool is invalid and does not connect at all, chances are that there is a mistake somewhere in the connection details (URL, username, and password). Make sure that you are using the username and password of one of your workers as defined in your pool account, keeping in mind that they are both case-sensitive. Feel free to send support an email with screenshots of the miner's configuration page if you'd like us to double-check.

Okay thanks. I'll double check everything (including cases, etc.) and send an email with the details if it still doesn't work. I've never had an issue before with L3s, etc. and this is my first LT5 to try.

FYI - I got the new Goldshell LT5s to work. Not sure what the issue was but their UI is kinda complicated to figure out but all working now.

[nealtheseal108]

My AntMiner L3+ is running and connected to the pool, yet it shows it has zero hashrate. How do I fix this?

[pooler]

My AntMiner L3+ is running and connected to the pool, yet it shows it has zero hashrate. How do I fix this?

If the worker's name shows up in green on the website, but the hash rate remains zero, it means that the miner is connected but not submitting any valid shares. This could happen for a number of reasons, the most likely of which is probably HW errors, which in turn is often caused by a bad or insufficient power supply.

[tysimon]

Dogecoin thru the roof, will we see a jump in PPS?

Of course. We're at 185% PPS now. Is this a record for the pool?

305% must be a record

360% !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 

[Got-Nodollar]

360% not bad - let’s get to 1K!

Looking back at the earlier posts with a few KH and mining 25 coins a day.... back to the future car needed please.

[tysimon]

360% not bad - let’s get to 1K!

Looking back at the earlier posts with a few KH and mining 25 coins a day.... back to the future car needed please.

I'm building it, wanna chip in ? 

[Got-Nodollar]

360% not bad - let’s get to 1K!

Looking back at the earlier posts with a few KH and mining 25 coins a day.... back to the future car needed please.

I'm building it, wanna chip in ? 

Ah investment opportunities! 

[RBCastro]

Pool don't accept gridseed mining anymore?

[pooler]

Pool don't accept gridseed mining anymore?

I don't see any reason why you shouldn't be able to use a Gridseed on the pool. The hash rate might take a few minutes to register, since it's quite low, but it's been that way for years now.

[huntert98]

I can't get a new Goldshell LT5 to work on the pool. It says the pool is invalid. I can get it to work on other pools. Have you looked at the LT5 compatibility on the pool?

It seems unlikely that this is a compatibility issue, since connection and authentication are quite straightforward in the Stratum protocol.
If it says that the pool is invalid and does not connect at all, chances are that there is a mistake somewhere in the connection details (URL, username, and password). Make sure that you are using the username and password of one of your workers as defined in your pool account, keeping in mind that they are both case-sensitive. Feel free to send support an email with screenshots of the miner's configuration page if you'd like us to double-check.

Okay thanks. I'll double check everything (including cases, etc.) and send an email with the details if it still doesn't work. I've never had an issue before with L3s, etc. and this is my first LT5 to try.

FYI - I got the new Goldshell LT5s to work. Not sure what the issue was but their UI is kinda complicated to figure out but all working now.

Where did you get your LT5s at?

[sblue8]

Hello!

I just started my mining operation back up and have it connected to my litecoinpool account. However, the payout address is old and I am not sure what service created it. I would like to get it "unlocked" so I can change it. I messaged support but want to get this resolved as soon as possible to make sure I am not losing out.

Thanks in advance

[pooler]

I just started my mining operation back up and have it connected to my litecoinpool account. However, the payout address is old and I am not sure what service created it. I would like to get it "unlocked" so I can change it. I messaged support but want to get this resolved as soon as possible to make sure I am not losing out.

Changing a locked address is generally not possible if you no longer have access to it, but at any rate your only chance is to talk to support over email. As of this writing, all the support requests we've received have been handled, so if you haven't received a reply, make sure you have the right contact details and send your email again.

[sblue8]

I just started my mining operation back up and have it connected to my litecoinpool account. However, the payout address is old and I am not sure what service created it. I would like to get it "unlocked" so I can change it. I messaged support but want to get this resolved as soon as possible to make sure I am not losing out.

Changing a locked address is generally not possible if you no longer have access to it, but at any rate your only chance is to talk to support over email. As of this writing, all the support requests we've received have been handled, so if you haven't received a reply, make sure you have the right contact details and send your email again.

I sent the email to support@litecoinpool.org as listed under Help about 7 hours ago. I will send again but let me know if that is the correct email. Thank you

[pooler]

I sent the email to support@litecoinpool.org as listed under Help about 7 hours ago. I will send again but let me know if that is the correct email. Thank you

That email address is the correct one.