atadro
Newbie
Offline
Activity: 42
Merit: 0
|
|
April 03, 2014, 07:45:05 PM |
|
what is default IP as shipped?
same as the S1 - 192.168.1.99
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
|
April 03, 2014, 08:11:37 PM |
|
i am certainly not as impressed as giga with my first shipment. none of the 6 hashed out of the box and only 1 could i even connect to the mgmt interface. prolly gonna be a long night of troubleshooting. each one of my 50+ S1's hashed out of the box - bring back the S1's...........
sounds like some sort of general network issue - you sure they are on the right IP subnet?
|
|
|
|
CroverNo01
|
|
April 03, 2014, 08:12:10 PM |
|
How did you rack mount the ant minter s1's??
Three ants per 22" shelf with power supplies double-sided-tapped to the back of the shelf. We opened over 1,000 boxes to get our 540 ants setup. Would love to see a photo or video of the rig - sounds insane setup!! Well done
|
|
|
|
abracadabra
|
|
April 03, 2014, 08:16:31 PM |
|
i am certainly not as impressed as giga with my first shipment. none of the 6 hashed out of the box and only 1 could i even connect to the mgmt interface. prolly gonna be a long night of troubleshooting. each one of my 50+ S1's hashed out of the box - bring back the S1's...........
Just opened up mine.... nearly every board inside had been knocked off the motherboard pci connectors and had come out of the slide-in slots.. Cannot open a webpage at 192.168.1.99.. continuing surgery..
|
|
|
|
phobus
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 03, 2014, 08:25:59 PM Last edit: April 03, 2014, 08:40:58 PM by phobus |
|
How do you get it to start mining? I had to make sure all the cards were plugged in and then it would boot. But now I've set up the network, can access the administration page, and entered in all my information, but it doesn't want to start?
|
|
|
|
abracadabra
|
|
April 03, 2014, 08:33:56 PM |
|
How do you get it to start mining? I had to make sure all the cards were plugged in and then it would but. But now I've set up the network, can access the administration page, and entered in all my information, but it doesn't want to start?
same here..
|
|
|
|
phobus
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 03, 2014, 08:40:29 PM |
|
can't ssh in either. the administration screen has no entry for cgminer version.
|
|
|
|
dropt
Legendary
Offline
Activity: 1512
Merit: 1000
|
|
April 03, 2014, 08:50:29 PM |
|
Wish I had one to help, but with guys like atadro buying 6 there weren't many to go around. Being first has its drawbacks, good luck guys, I hope you get it figured out.
|
|
|
|
abracadabra
|
|
April 03, 2014, 08:54:24 PM |
|
ssh login is root/admin
/etc/init.d/cgminer.sh is hardcoded to ping 192.168.1.1 for some reason. I changed that to my gateway ip.
machine starts to mine for a minute, then shuts down and starts beeping
continuing surgery...
|
|
|
|
abracadabra
|
|
April 03, 2014, 09:09:00 PM |
|
well.. with the 192.168.1.1 line in /etc/init.d/cgminer.sh fixed doing a:
/etc/init.d/cgminer.sh start
gets me mining...
still no display tho.. I'm thinking one of the other scripts needs to run to update the display..
|
|
|
|
googlemaster1
|
|
April 03, 2014, 09:11:14 PM |
|
They used to have a limit on their S1's. It kind of irks me they don't have any limits on the S2. Probably because of the turbulent ride BTC has been having lately, they couldn't afford to stick to ideals over profit margins this time around. can't say I blame them much, either...
That said, I have 1 S2 Batch 2 coming soon, so I too would like to know some of the questions others have been asking:
1) How loud is it? 2) What were the kinks, if any that faced in setting it up 3) Does it make the room an oven?
Mine is going out in a shed with half assed temp controls and airflow, so I'm curious what sort of accomodations I'll have to make. Drill another vent in the wall and add a giant fan on it, perhaps?
|
BTC: 15565dcUp4LEWe6KYT7tawMHFRL4cBbFGN
|
|
|
phobus
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 03, 2014, 09:21:00 PM |
|
thanks! editing that script did it for me... it seems to overwrite it on every reboot though i'll have to look for where thats happening.
|
|
|
|
atadro
Newbie
Offline
Activity: 42
Merit: 0
|
|
April 03, 2014, 09:36:28 PM |
|
well.. with the 192.168.1.1 line in /etc/init.d/cgminer.sh fixed doing a:
/etc/init.d/cgminer.sh start
gets me mining...
still no display tho.. I'm thinking one of the other scripts needs to run to update the display..
thanks a bunch. that got my first one hashing away. that change plus reseating all boards and cables is prolly required for most to get them running.
|
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
|
April 03, 2014, 09:37:05 PM |
|
They used to have a limit on their S1's. It kind of irks me they don't have any limits on the S2. Probably because of the turbulent ride BTC has been having lately, they couldn't afford to stick to ideals over profit margins this time around. can't say I blame them much, either...
That said, I have 1 S2 Batch 2 coming soon, so I too would like to know some of the questions others have been asking:
1) How loud is it? 2) What were the kinks, if any that faced in setting it up 3) Does it make the room an oven?
Mine is going out in a shed with half assed temp controls and airflow, so I'm curious what sort of accomodations I'll have to make. Drill another vent in the wall and add a giant fan on it, perhaps?
number 3 is entirely relative. its 1000W of heat no matter what. If 3x 360W antminer S1 was making it an oven, so will this.
|
|
|
|
abracadabra
|
|
April 03, 2014, 09:40:41 PM |
|
well.. with the 192.168.1.1 line in /etc/init.d/cgminer.sh fixed doing a:
/etc/init.d/cgminer.sh start
gets me mining...
still no display tho.. I'm thinking one of the other scripts needs to run to update the display..
thanks a bunch. that got my first one hashing away. that change plus reseating all boards and cables is prolly required for most to get them running. thanks! editing that script did it for me... it seems to overwrite it on every reboot though i'll have to look for where thats happening. Did either of you guys get the display working? Mine is dead :/
|
|
|
|
phobus
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 03, 2014, 09:42:50 PM |
|
Did either of you guys get the display working?
Mine is dead :/
Yeah, mine worked after I reseated the cpu board.
|
|
|
|
abracadabra
|
|
April 03, 2014, 09:44:09 PM |
|
Did either of you guys get the display working?
Mine is dead :/
Yeah, mine worked after I reseated the cpu board. Well.. mine is mining.. just no display... I'd assume that if the cpu board is not seated, I wouldn't get any hashing at all..
|
|
|
|
HolyScott
|
|
April 03, 2014, 09:48:45 PM |
|
Hmmm, Well I found the overclocking settings.
|
|
|
|
abracadabra
|
|
April 03, 2014, 09:50:31 PM |
|
Hmmm, Well I found the overclocking settings.
Heh.. I wouldn't try without making sure you got more headroom on your PSU. I'm thinking a 2KW server power supply. and make sure you got plenty of cool ambient air going in.. cause it's going to be toasty coming out.. Looks like they are running them at 196.
|
|
|
|
svebos
Member
Offline
Activity: 69
Merit: 10
|
|
April 03, 2014, 09:51:00 PM |
|
Is there any CE certificate link for Antminer S2? It may be very badly needed in some EU regimes.
|
|
|
|
|