nikolaz
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 03:56:52 PM |
|
Like a nervous expectant father....
I think I've got everything prepped:
-bench cleared and ready for surgery reseating the inevitably unseated cards. cordless screwdriver battery charging. -2nd router daisy-chained to primary router to create 192.168.1.x subnet -AntMiner S2 manual pdf downloaded and open -exterior security cameras watching for UPS truck -credit card on hand to pay import duty -wearing out command-r refreshing this thread
have i missed anything?
coffee, lots of coffee
|
|
|
|
dalenorman2005
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 64
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 04:02:54 PM |
|
|
|
|
|
nottm28
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 04:03:14 PM |
|
Like a nervous expectant father....
I think I've got everything prepped:
-bench cleared and ready for surgery reseating the inevitably unseated cards. cordless screwdriver battery charging. -2nd router daisy-chained to primary router to create 192.168.1.x subnet -AntMiner S2 manual pdf downloaded and open -exterior security cameras watching for UPS truck -credit card on hand to pay import duty -wearing out command-r refreshing this thread
have i missed anything?
Cash - UPS don't take credit cards (in the UK anyway)...
|
donations not accepted
|
|
|
alexrossi
Legendary
Offline
Activity: 3836
Merit: 1745
Join the world-leading crypto sportsbook NOW!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 04:07:47 PM |
|
Like a nervous expectant father....
I think I've got everything prepped:
-bench cleared and ready for surgery reseating the inevitably unseated cards. cordless screwdriver battery charging. -2nd router daisy-chained to primary router to create 192.168.1.x subnet -AntMiner S2 manual pdf downloaded and open -exterior security cameras watching for UPS truck -credit card on hand to pay import duty -wearing out command-r refreshing this thread
have i missed anything?
Cash - UPS don't take credit cards (in the UK anyway)... also in italy. But, dunno why, american couriers are a lot smarter
|
|
|
|
CroverNo
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 04:10:54 PM |
|
Like a nervous expectant father....
I think I've got everything prepped:
-bench cleared and ready for surgery reseating the inevitably unseated cards. cordless screwdriver battery charging. -2nd router daisy-chained to primary router to create 192.168.1.x subnet -AntMiner S2 manual pdf downloaded and open -exterior security cameras watching for UPS truck -credit card on hand to pay import duty -wearing out command-r refreshing this thread
have i missed anything?
Cash - UPS don't take credit cards (in the UK anyway)... My UPS in Scotland/UK Took Card fine but tbh best doing it over the phone so there is no on hand delivery charges plus means a lot faster
|
|
|
|
btc_jumpnrl
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 81
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 04:23:12 PM |
|
Just received my lone S2. I can confirm that the straps on the box do nothing but entice the driver to sling it around 1-handedly as I watched the man grab it and bounce it off the 2-steps of his truck. The package is well worn around the edges for just 3-day trip and has nice rip into the side. Unboxing now. Bad note, I can hear things rolling around inside the box already. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
Tips: 1H1DF3BzFF2CVhPB4psEghg4bF5VYDseBT
|
|
|
ElGabo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 04:29:54 PM |
|
Could tell me somebody the fans are 120x38 or 120x20mm?
Maybe?
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
MrTeal
Legendary
Offline
Activity: 1274
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 05:31:43 PM |
|
Could tell me somebody the fans are 120x38 or 120x20mm?
Maybe? Not at home to check but I'm quite sure they're 38mm
|
|
|
|
ElGabo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 05:34:24 PM |
|
Thanks!
Could you check me when you here?
I should know what to order.... Ants will be here in the middle of next week and I always change the fans to high cfm....
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
klondike_bar
Legendary
Offline
Activity: 2128
Merit: 1005
ASIC Wannabe
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 05:44:51 PM |
|
Thanks!
Could you check me when you here?
I should know what to order.... Ants will be here in the middle of next week and I always change the fans to high cfm....
I imagine they use the same 120x38 fans as the S1 - you want lots of airflow for a system like this.
|
|
|
|
btc_jumpnrl
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 81
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 05:56:27 PM |
|
Reseated all the boards, and rerouted some of the wires and taped down the fan wires (they are a bit close to the boards for my taste). Booted up. First boot with full fans is LOUD. Just plugged in my settings and is rebooting now. I have some pictures and a video of the first Boot with full fans I can upload in a bit. I lack Kill-a-watt or a sound leveler so I can't help out with those.
The main fans are 4X 120x38mm though. They are Jiang Shan Lai (JSL) DC Brushless Model JDH1238B. 12V - 1A.
|
Tips: 1H1DF3BzFF2CVhPB4psEghg4bF5VYDseBT
|
|
|
sikke
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 05:59:25 PM |
|
Like a nervous expectant father....
I think I've got everything prepped:
-bench cleared and ready for surgery reseating the inevitably unseated cards. cordless screwdriver battery charging. -2nd router daisy-chained to primary router to create 192.168.1.x subnet -AntMiner S2 manual pdf downloaded and open -exterior security cameras watching for UPS truck -credit card on hand to pay import duty -wearing out command-r refreshing this thread
have i missed anything?
Haha few beers coz it will be easy plug and play. +1 for best photo
|
|
|
|
|
1l1l11ll1l
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 06:01:49 PM |
|
If anyone is wondering, I'm seeing 10A @ 208V for two S2 units on my PDU.
|
|
|
|
MrTeal
Legendary
Offline
Activity: 1274
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 06:10:50 PM |
|
Well holy hell. In my off the shelf (non-Bitmain) BBB here at work, it fired right up once I loaded this. You sir are a scholar and a gentleman. Uncompressing Linux... done, booting the kernel. [ 2.093920] omap2_mbox_probe: platform not supported [ 2.104921] tps65217-bl tps65217-bl: no platform data provided [ 2.180782] bone-capemgr bone_capemgr.9: slot #0: No cape found [ 2.217888] bone-capemgr bone_capemgr.9: slot #1: No cape found [ 2.254997] bone-capemgr bone_capemgr.9: slot #2: No cape found [ 2.292105] bone-capemgr bone_capemgr.9: slot #3: No cape found [ 2.302129] bone-capemgr bone_capemgr.9: slot #4: Failed to resolve tree [ 2.312995] bone-capemgr bone_capemgr.9: loader: failed to load slot-4 BB-BONE-EMMC-2G:00A0 (prio 1) [ 2.342404] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed [ 2.407879] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8 [ 2.419582] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22 [ 2.426888] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single INIT: version 2.88 booting Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory bootlogd. Starting initc Config FPGA 0 No bitmain-asic [ 3.266987] compile Mar 27 2014--22:19:46 [ 3.271810] bitmain-asic: success to register device [ 3.281537] bitmain_asic_open ok fpga_dl_fd is 4[ 3.285397] FPGA don't responed config{0xc0001480}
[ 3.291766] FPGA return data error [ 3.295478] bitmain_asic_close Config FPGA 1 Have bitmain-asic [ 3.315900] bitmain-asic: success to unregister device [ 4.336760] compile Mar 27 2014--22:19:46 [ 4.341653] bitmain-asic: success to register device [ 4.351391] bitmain_asic_open ok fpga_dl_fd is 4[ 4.355243] FPGA don't responed config{0xc0001480}
[ 4.361602] FPGA return data error [ 4.365309] bitmain_asic_close Config FPGA 2 Have bitmain-asic [ 4.385144] bitmain-asic: success to unregister device [ 5.405977] compile Mar 27 2014--22:19:46 [ 5.410812] bitmain-asic: success to register device [ 5.420513] bitmain_asic_open ok fpga_dl_fd is 4[ 5.424374] FPGA don't responed config{0xc0001480}
[ 5.430758] FPGA return data error [ 5.434437] bitmain_asic_close Config FPGA 3 Have bitmain-asic [ 5.454560] bitmain-asic: success to unregister device [ 6.475311] compile Mar 27 2014--22:19:46 [ 6.480207] bitmain-asic: success to register device [ 6.489928] bitmain_asic_open ok fpga_dl_fd is 4[ 6.493771] FPGA don't responed config{0xc0001480}
[ 6.500131] FPGA return data error [ 6.503844] bitmain_asic_close Config FPGA 4 Have bitmain-asic [ 6.523681] bitmain-asic: success to unregister device [ 7.544660] compile Mar 27 2014--22:19:46 [ 7.549506] bitmain-asic: success to register device [ 7.559196] bitmain_asic_open ok fpga_dl_fd is 4[ 7.563059] FPGA don't responed config{0xc0001480}
[ 7.569453] FPGA return data error [ 7.573128] bitmain_asic_close Config FPGA 5 Have bitmain-asic [ 7.593285] bitmain-asic: success to unregister device [ 8.614034] compile Mar 27 2014--22:19:46 [ 8.618918] bitmain-asic: success to register device [ 8.628639] bitmain_asic_open ok fpga_dl_fd is 4[ 8.632487] FPGA don't responed config{0xc0001480}
[ 8.638847] FPGA return data error [ 8.642558] bitmain_asic_close Config FPGA 6 Have bitmain-asic [ 8.662486] bitmain-asic: success to unregister device [ 9.683323] compile Mar 27 2014--22:19:46 [ 9.688162] bitmain-asic: success to register device [ 9.697885] bitmain_asic_open ok fpga_dl_fd is 4[ 9.701748] FPGA don't responed config{0xc0001480}
[ 9.708129] FPGA return data error [ 9.711807] bitmain_asic_close Config FPGA 7 Have bitmain-asic [ 9.731973] bitmain-asic: success to unregister device [ 10.752735] compile Mar 27 2014--22:19:46 [ 10.757616] bitmain-asic: success to register device [ 10.767343] bitmain_asic_open ok fpga_dl_fd is 4[ 10.771195] FPGA don't responed config{0xc0001480}
[ 10.777554] FPGA return data error [ 10.781266] bitmain_asic_close Config FPGA 8 Have bitmain-asic [ 10.801128] bitmain-asic: success to unregister device [ 11.821975] compile Mar 27 2014--22:19:46 [ 11.826814] bitmain-asic: success to register device [ 11.836526] bitmain_asic_open ok fpga_dl_fd is 4[ 11.840393] FPGA don't responed config{0xc0001480}
[ 11.846774] FPGA return data error [ 11.850450] bitmain_asic_close Config FPGA 9 Have bitmain-asic [ 11.870630] bitmain-asic: success to unregister device [ 12.891386] compile Mar 27 2014--22:19:46 [ 12.896270] bitmain-asic: success to register device [ 12.905976] bitmain_asic_open ok fpga_dl_fd is 4[ 12.909821] FPGA don't responed config{0xc0001480}
[ 12.916179] FPGA return data error [ 12.919893] bitmain_asic_close Config FPGA 10 Have bitmain-asic [ 12.939776] bitmain-asic: success to unregister device [ 13.960672] compile Mar 27 2014--22:19:46 [ 13.965507] bitmain-asic: success to register device [ 13.975220] bitmain_asic_open ok fpga_dl_fd is 4[ 13.979081] FPGA don't responed config{0xc0001480}
[ 13.985475] FPGA return data error [ 13.989153] bitmain_asic_close [ 14.735590] libphy: PHY 4a101000.mdio:01 not found [ 14.740626] net eth0: phy 4a101000.mdio:01 not found on slave 1 Error resolving pool.ntp.org: System error (-11) 1 Jan 00:00:32 ntpdate[401]: Can't find host pool.ntp.org: System error (-11) 1 Jan 00:00:32 ntpdate[401]: no servers can be used, exiting Starting Dropbear SSH server: dropbear. Starting ntpd: done Starting Avahi Daemon: avahi-daemon. Starting Lighttpd Web Server: lighttpd. Starting Cgminer daemon: PING 192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: seq=0 ttl=128 time=0.888 ms
--- 192.168.1.1 ping statistics --- 1 packets transmitted, 1 packets received, 0% packet loss round-trip min/avg/max = 0.888/0.888/0.[ 34.999291] bitmain-asic: success to unregister device 888 ms Have bitmain-asic [ 36.022459] compile Mar 27 2014--22:19:46 [ 36.027343] bitmain-asic: success to register device PARAMS = --bitmain-dev /dev/bitmain-asic --bitmain-options 115200:32:8:40:196:5f06 --bitmain-hwerror --queue 8192 cgminer. Starting Monitor-recobtn daemon: monitor-recobtn. [ 36.175655] bitmain_asic_open ok [ 36.193446] Detect device [ 36.196379] FPGA return data error [ 36.199962] total chain_num{0} [ 36.203158] FPGA detect asic addr err [ 36.203158] [ 36.208532] [ 36.208532] [ 36.208532] !!!!Restart1 detect asic addr!!! [ 36.208532] [ 36.217638] total chain_num{0} [ 36.220831] FPGA detect asic addr err [ 36.220831] [ 36.226202] [ 36.226202] [ 36.226202] !!!!Restart2 detect asic addr!!! [ 36.226202] [ 36.235296] total chain_num{0} [ 36.238488] FPGA detect asic addr err [ 36.238488] [ 36.243861] [ 36.243861] [ 36.243861] !!!!Restart3 detect asic addr!!! [ 36.243861] [ 36.252967] total chain_num{0} [ 36.256163] FPGA detect asic addr err [ 36.256163] [ 36.261538] clear FPGA nonce buffer [ 36.265230] FPGA return data error [ 36.268798] FPGA don't code INIT: Entering runlevel: 5 Stopping Bootlog daemon: bootlogd. No bitmain-lcd [ 36.365617] kthread ok
.---O---. | | .-. o o | | |-----.-----.-----.| | .----..-----.-----. | | | __ | ---'| '--.| .-'| | | | | | | | |--- || --'| | | ' | | | | '---'---'--'--'--. |-----''----''--' '-----'-'-'-' -' | '---'
The Angstrom Distribution antMiner ttyO0
Angstrom v2013.06 - Kernel 3.8.13
antMiner login: OA
Edit: I'm going to need you to email my boss with an excuse for why I'm ducking out at lunch to go home though.
|
|
|
|
1l1l11ll1l
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 06:16:27 PM |
|
|
|
|
|
cxboyminer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 06:21:47 PM |
|
I will start a solution discussion thread soon in the future for S2.
For now, if you guys experience dead or bad PSU, try and replace the jumper cable with another one.
- will update this post for more solutions -
|
|
|
|
abracadabra
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 06:23:13 PM |
|
Who wants to see the difference between the Bitmain BBB and the stock BBB?
{pics snipped}
Thanks 1l1l11ll1l, the small differences make me think the S2 BBB is a chinese knockoff clone..
|
|
|
|
nikolaz
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 06:26:21 PM |
|
Who wants to see the difference between the Bitmain BBB and the stock BBB?
{pics snipped}
Thanks 1l1l11ll1l, the small differences make me think the S2 BBB is a chinese knockoff clone.. Noticed that too... must be knockoff version for sure
|
|
|
|
jimrome
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
April 04, 2014, 06:30:22 PM |
|
Who wants to see the difference between the Bitmain BBB and the stock BBB?
{pics snipped}
Thanks 1l1l11ll1l, the small differences make me think the S2 BBB is a chinese knockoff clone.. Noticed that too... must be knockoff version for sure You guys realize that the BBB is an open source design right?
|
|
|
|
|