[ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs

[dropt]

Samson Mow is the funniest troll in Crypto:

Samson Mow is an idiot.  Hard to respect anyone that pays him attention.

[Wallbot]

What is the command line for factory reset a SP30/35 in SSH ?

[Guy Corem]

Halving blocks at block halving party TLV 7.7.2016

[Guy Corem]

Halving blocks at block halving party TLV 7.7.2016

https://youtu.be/IZECsUzdG6k

[bitcoinbarron]

I miss having Spondoolies as a threat to bitmain,

come back spondoolies!

[Searing]

Halving blocks at block halving party TLV 7.7.2016

https://youtu.be/IZECsUzdG6k

I don't have a spondoolies unit...but as an outsider I find it interesting they you all don't have a link to a public area for all your previous firmware for their products.
Heck even KNC left that up for folk..it is not on their main page but they still have github stuff for their Mercury/Saturn/Jupiter and links yet on their main page
for Neptune/Titan......(also on github) so when they finally do go belly up the stuff is someplace.

Anyway from someone looking from the outside in ...Spondooliies is bankrupt...so toss what you can out to the community should be no big thing imho

just my 'outsider' observation on this

[Unacceptable]

Halving blocks at block halving party TLV 7.7.2016

https://youtu.be/IZECsUzdG6k

I don't have a spondoolies unit...but as an outsider I find it interesting they you all don't have a link to a public area for all your previous firmware for their products.
Heck even KNC left that up for folk..it is not on their main page but they still have github stuff for their Mercury/Saturn/Jupiter and links yet on their main page
for Neptune/Titan......(also on github) so when they finally do go belly up the stuff is someplace.

Anyway from someone looking from the outside in ...Spondooliies is bankrupt...so toss what you can out to the community should be no big thing imho

just my 'outsider' observation on this

LMAO,your assuming they give a shit about the "community" 

They don't care about anyone but themselves,at one point they did care,but that all changed when they got lots of money 

[Searing]

Halving blocks at block halving party TLV 7.7.2016

https://youtu.be/IZECsUzdG6k

I don't have a spondoolies unit...but as an outsider I find it interesting they you all don't have a link to a public area for all your previous firmware for their products.
Heck even KNC left that up for folk..it is not on their main page but they still have github stuff for their Mercury/Saturn/Jupiter and links yet on their main page
for Neptune/Titan......(also on github) so when they finally do go belly up the stuff is someplace.

Anyway from someone looking from the outside in ...Spondooliies is bankrupt...so toss what you can out to the community should be no big thing imho

just my 'outsider' observation on this

LMAO,your assuming they give a shit about the "community"  

They don't care about anyone but themselves,at one point they did care,but that all changed when they got lots of money  

You likely are correct as always...I just have a hard time believing anyone is worse then KNC from past experience....so the mind begins to boggle at such a notion
thus I post 'fairy tale like questions" ..its a defense mechanism because of KNC issues (PTSD ASIC Pre-order syndrome) lol

But anyway deafening silence will tell us I guess if they don't address this on this thread but will post 'halving party links' sheesh I'm frigging old fashioned I guess on support

even if your company goes 'toast'

[fullzero]

Halving blocks at block halving party TLV 7.7.2016

https://youtu.be/IZECsUzdG6k

I don't have a spondoolies unit...but as an outsider I find it interesting they you all don't have a link to a public area for all your previous firmware for their products.
Heck even KNC left that up for folk..it is not on their main page but they still have github stuff for their Mercury/Saturn/Jupiter and links yet on their main page
for Neptune/Titan......(also on github) so when they finally do go belly up the stuff is someplace.

Anyway from someone looking from the outside in ...Spondooliies is bankrupt...so toss what you can out to the community should be no big thing imho

just my 'outsider' observation on this

LMAO,your assuming they give a shit about the "community"  

They don't care about anyone but themselves,at one point they did care,but that all changed when they got lots of money  

You likely are correct as always...I just have a hard time believing anyone is worse then KNC from past experience....so the mind begins to boggle at such a notion
thus I post 'fairy tale like questions" ..its a defense mechanism because of KNC issues (PTSD ASIC Pre-order syndrome) lol

But anyway deafening silence will tell us I guess if they don't address this on this thread but will post 'halving party links' sheesh I'm frigging old fashioned I guess on support

even if your company goes 'toast'

BFL was worse than KNC

[wh00per]

Since the googleapis.com account expired, did anyone copy/host the SD card images anywhere else?

If a drop-box like link is available I could grab and store them somewhere for the benefit of the miners still using them out-there.

Please let me know.

Where can we find the SP35 Firmware to factory reset SP35

Recovery: https://storage.googleapis.com/spond_firmware/recovery/spond_images_sp30.zip
Latest: https://storage.googleapis.com/spond_firmware/spon_2.7.1.tar

[dogie]

Since the googleapis.com account expired, did anyone copy/host the SD card images anywhere else?

If a drop-box like link is available I could grab and store them somewhere for the benefit of the miners still using them out-there.

Please let me know.

Permissions weren't granted for the other files, but for the two linked they're now in my archive and also mega'ed.

spon_2.7.1.tar or shortened if error.
spond_images_sp30.zip or shortened if error.

[wh00per]

Thanks Dogie. Now they're also available from the links below:

http://powerprice.info/SP30/spond_images_sp30.zip

http://powerprice.info/SP30/spon_2.7.1.tar

[memo2688]

Halving blocks at block halving party TLV 7.7.2016

https://youtu.be/IZECsUzdG6k

Good day I need your help, my spondoolies sp35 has a psu damaged, I need to know how to configure it to work with one psu, as is showing me the stats asic and constantly reset:

12/08 11: 24: 17: Hash rate too low !!!!

The other solution I need is to replace the damaged psu with a one generic, in my country (Venezuela) I have access to buy a model psu HP DPS-1200FB server power supply, I need to know if it is compatible with my yukon sp35 or if you can somehow adapt.

could you tell me if there is another psu compatible with my yukon sp35?

thanks and sorry for the trouble.

[sidehack]

It shouldn't be too hard to get power to the chips with a different PSU, but I don't know if the miner's control board actually requires being able to talk to the PSU (how it gets the data/stats on power use) or not. As for running on one PSU, each PSU directly powers one of the big hashboards so without rewiring (and serious downclocking) you can't run both off one PSU. What you want to look for is a setting like "restart mining if hashrate is under xxxx" and lower the number to a minimum for one board - probably around 2TH.

[bomberb17]

What if you disable the ASIC loops that are powered from the damaged PSU?

[jstew]

ive got 2x sp20e's that come up on the network and i can ssh into but do not hash , and i cant login via the webpage

This site can’t be reached

192.168.1.236 refused to connect.

ive done sd recovery and its still the same , anything i can do from ssh to get back to the webpage/dashboard?

[jstew]

ok im getting somewere

login to ssh
cd to /
cd to /etc/bin and run ./miner_gate_sp20
open duplicate ssh window
login as root
cd /etc
then run cgminer -c cgminer.conf


from there the miner will mine but still cannot acess it via dashboard/webpage


anyone got any ideas

[jstew]

i actually got the sd recovery to work , what i ended up having to do after finally getting into the dashboard was doing a factory reset , and then the miner started working properly .

does anyone have the latest sp20 firmware , as the sd recovery reverts it back tot he original fw


also if anyone needs copies of the sd recovery , or sd boot images i have both

[Searing]

i actually got the sd recovery to work , what i ended up having to do after finally getting into the dashboard was doing a factory reset , and then the miner started working properly .

does anyone have the latest sp20 firmware , as the sd recovery reverts it back tot he original fw


also if anyone needs copies of the sd recovery , or sd boot images i have both

might be getting a hold of you (will wait may just use them as doorstops) someone is giving me for shipping an sp10,sp20,sp30 ...so if I only had an ice fishing house
I needed a space heater for and inet access I'd be all set (and ear plugs)


sheesh...but always wanted some ..may just fire them up to look them over....but at 14c kwh probably (er likely) not gonna run them (unless the furnace goes out and I

really really need loud space heaters)

anyway couple weeks I may be asking for help on here just to watch them run

[jstew]

i actually got the sd recovery to work , what i ended up having to do after finally getting into the dashboard was doing a factory reset , and then the miner started working properly .

does anyone have the latest sp20 firmware , as the sd recovery reverts it back tot he original fw


also if anyone needs copies of the sd recovery , or sd boot images i have both

might be getting a hold of you (will wait may just use them as doorstops) someone is giving me for shipping an sp10,sp20,sp30 ...so if I only had an ice fishing house
I needed a space heater for and inet access I'd be all set (and ear plugs)


sheesh...but always wanted some ..may just fire them up to look them over....but at 14c kwh probably (er likely) not gonna run them (unless the furnace goes out and I

really really need loud space heaters)

anyway couple weeks I may be asking for help on here just to watch them run

ouch i have a hard time running my sp20's at full power at 4c kwh
at full power ur talking a 2+$ a day loss on a full power sp20  at 14c kwh