Searing
Copper Member
Legendary
 Offline
Activity: 2898
Merit: 1464
Clueless!
|
 |
September 15, 2016, 11:47:36 PM |
|
i actually got the sd recovery to work , what i ended up having to do after finally getting into the dashboard was doing a factory reset , and then the miner started working properly .
does anyone have the latest sp20 firmware , as the sd recovery reverts it back tot he original fw
also if anyone needs copies of the sd recovery , or sd boot images i have both
might be getting a hold of you (will wait may just use them as doorstops) someone is giving me for shipping an sp10,sp20,sp30 ...so if I only had an ice fishing house I needed a space heater for and inet access I'd be all set (and ear plugs) sheesh...but always wanted some ..may just fire them up to look them over....but at 14c kwh probably (er likely) not gonna run them (unless the furnace goes out and I really really need loud space heaters) anyway couple weeks I may be asking for help on here just to watch them run ouch i have a hard time running my sp20's at full power at 4c kwh at full power ur talking a 2+$ a day loss on a full power sp20 at 14c kwh yeah just a toy to look over ...so only use will be an 'emergency space heater" but will be fun to look at  (man do I need a BTC pump..wonder if 1000 usd btc would even be enough?) |
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:) |
|
|
|
|
|
|
|
|
|
|
|
The forum strives to allow free discussion of any ideas. All policies are built around this principle. This doesn't mean you can post garbage, though: posts should actually contain ideas, and these ideas should be argued reasonably.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
|
jstew
|
|
September 16, 2016, 03:35:29 AM |
|
i pulled my sp20's oput of my dc today and bought them home to replace my way outdated s2's , im trying to downclock them to around 500w at the wall to keep noise down to a minimum. my question is how accurate is the section were it says "wall watts" ass seen in this screenshot i just grabbed  i dont currently have a kill-a-watt to check power use |
|
|
|
|
crushed
Member
Offline
Activity: 103
Merit: 11
|
|
September 16, 2016, 04:49:53 AM |
|
If anyone has a spare controller board for an SP20, let me know how much you want for it. Mine had a resistor burn up on it...
|
|
|
|
|
|
jstew
|
|
September 17, 2016, 10:56:36 PM |
|
If anyone has a spare controller board for an SP20, let me know how much you want for it. Mine had a resistor burn up on it...
crushed drop me a pm looks like i have a spare controller and 1 hashboard as well |
|
|
|
|
tntdgcr
Full Member
Offline
Activity: 219
Merit: 100
Bitcoin Mining Hosting
|
|
September 21, 2016, 02:37:01 AM |
|
If anyone has a spare controller board for an SP20, let me know how much you want for it. Mine had a resistor burn up on it...
crushed drop me a pm looks like i have a spare controller and 1 hashboard as well We have 10x sets of parts for any SP20. contact us for parts. |
OregonMines is expanding. Are you expanding with us?
|
|
|
|
bomberb17
|
|
September 24, 2016, 02:09:16 PM |
|
I need to make my SP30 as quiet as possible, fan speed at 40% maximum.
With lowest voltage setting, 0.620 Volts, and 30 degrees Celcius intake temperature, I get around 55 degrees exhaust temperature. All ASIC temps stay at 85 degrees. Hashrate around 2500Ghs.
How far do you think I can push it with fans staying at 40%? Should I go as high as 70-75 degrees exhaust provided the chips are below 125 degrees? And I don't want to risk a fire..
|
|
|
|
|
|
jstew
|
|
September 24, 2016, 06:36:00 PM |
|
I need to make my SP30 as quiet as possible, fan speed at 40% maximum.
With lowest voltage setting, 0.620 Volts, and 30 degrees Celcius intake temperature, I get around 55 degrees exhaust temperature. All ASIC temps stay at 85 degrees. Hashrate around 2500Ghs.
How far do you think I can push it with fans staying at 40%? Should I go as high as 70-75 degrees exhaust provided the chips are below 125 degrees? And I don't want to risk a fire..
the sp stuff is nice as it will throttle if it gets hot to avoid damage all my sp20's are now running .58-.61v with fans at 30%-40% i get 900-1000gh out of each at with a pair of them running off 1000w psus and it keeps them below 115* i havent tried that with my sp31 yet but i bet it would do the same as the sp20's , just keep the exhaust pointed away from anything flamable my sp31 is in my datacenter with cheap power so i run it full out , but im half tempted to see how efficiant it can get undervolted |
|
|
|
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
|
September 30, 2016, 05:58:31 PM |
|
|
|
|
|
asevereyn
Newbie
Offline
Activity: 10
Merit: 0
|
 |
October 05, 2016, 03:01:02 AM |
|
|
|
|
|
|
|
|
tntdgcr
Full Member
Offline
Activity: 219
Merit: 100
Bitcoin Mining Hosting
|
|
October 06, 2016, 09:20:29 PM |
|
I'd host files like this for anyone , too bad there is no "updated" recovery stick |
OregonMines is expanding. Are you expanding with us?
|
|
|
|
jstew
|
|
October 07, 2016, 01:59:44 AM |
|
I'd host files like this for anyone , too bad there is no "updated" recovery stick ill pm u links to neptune fw/recovery and also the sd boot for the sp20 , ill see what other fw's i have laying around that are no longer able to be had online my internet is slow as hell at home so will take me some time to upload the others |
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1183
dogiecoin.com
|
|
October 07, 2016, 02:26:25 AM |
|
|
|
|
|
|
jstew
|
|
October 07, 2016, 03:00:26 AM |
|
actually instead of pming them to ya ill just leave them in the thread for u to grab them. sp20 sd boot ( this is the one u have to leave the sd card in the controller to make it run) http://www.filedropper.com/sd-boot-work-2614 |
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1183
dogiecoin.com
|
|
October 07, 2016, 07:44:16 PM |
|
actually instead of pming them to ya ill just leave them in the thread for u to grab them. sp20 sd boot ( this is the one u have to leave the sd card in the controller to make it run) http://www.filedropper.com/sd-boot-work-2614 mirror here. |
|
|
|
|
jstew
|
|
October 08, 2016, 04:00:23 AM |
|
actually instead of pming them to ya ill just leave them in the thread for u to grab them. sp20 sd boot ( this is the one u have to leave the sd card in the controller to make it run) http://www.filedropper.com/sd-boot-work-2614 mirror here. thanks dogie |
|
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
|
October 13, 2016, 04:59:27 AM |
|
BitFury finally started to deploy its 16nm
|
|
|
|
|
majestymage
|
|
October 13, 2016, 07:00:11 AM |
|
BitFury finally started to deploy its 16nm
and i really wait for your deployment  |
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
|
October 13, 2016, 08:07:59 AM |
|
BitFury finally started to deploy its 16nm
and i really wait for your deployment You mean UNemployment  |
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan |
|
|
|
