NA

[Buerra]

For those who do Guldencoin business with BetaShareX

https://twitter.com/BetaShareX/status/527382570376658944

Haha, did anyone even know that NLG was on there?

[deephouse]

Donation for Guldencoin faucet http://guldencoinfaucet.nl/


All donations are still welcome for GuldencoinWeb donation Program. More details (in Dutch) at http://guldencoinweb.nl/doneer.php

Thank to all who donated (especially LTEX who donated big time). As you can see all donations are spend well, directly to the community and development of Guldencoin in general. We keep doing so!

Thanks, just got my 0.5316 coin.

[c_e_d]

It's really good to see more and more places to spend Guldencoin @.

@devs, how is the progress going on the difficulty adjustment?

There was a live feed done on Friday by /GeertJohan but since then the topic has just died off again. I am sure work is being done on it so we don't have to worry.

All I can say, sometimes when it gets quiet, it doesn't always mean nothing is happening. In this case it's the lack of time to create noise, but..... Noise there will be...

You are right: While GeertJohan is concentrating on a new diff algo for NLG which is a big task and takes time, I was digging into the code we use now for a better understanding how it reacts and how it could be modified as a quick solution with low risk until the new algo is ready to go live.
Analysing the DGW3 code I found 2 smaller mistakes leading to a max factor of ~3.13 instead of 3.0 (not a big deal) but the set of 50 blocks thsminer posted earlier smelled like I needed more data. Ask and you will be given thsminer was sending me data of 2000! blocks a few days ago.
On the first view it looked like it was basically in line with what I was expecting based on the code.
Running some calculations on this big pile of records to compare the diff of the block against what I was expecting from the DGW3 code was the easiest part of the work. Reading through all those lines of numbers took a lot of time and coffee, but finally I found a row of blocks where the diff changes still seems far too late and far slower than they should be; right now I am trying to understand why and how this happened. Understanding those problems seems necessary to me to prevent them showing up again in the future.

[ny2cafuse]

Are we having some calm before the storm?

Possibly 

I know I've got something in the works that will be a first for the coin.  If all goes as planned, there will be some awesome Xmas presents for some people this year.

Here's a preview(I know you all like these mysterious hints):



-Fuse

I got word back, and this project will be ready around mid-November.  Here's another hint:

They would go 0.0381944444444444 fathoms deep if they were 25400 microns longer. 

-Fuse

[Litesire]

For those who do Guldencoin business with BetaShareX

https://twitter.com/BetaShareX/status/527382570376658944

Haha, did anyone even know that NLG was on there?

not me.

[Dutchyyy]

Hi All,

Coinmarketcap is now using our official block explorer and our figures are all showing correctly. Should you want to tip coinmarketcap for it's great service, below is the tip address.

Ok, everything should be updated now.  Thanks for your patience and the info!  

My address for tips: GRwZ9J8APhWZJLicXtv3T15oVUcWz4MCZ8

We are officially ranked 66 at the time of this message and our aim is to be stable top 50 currency within the next 3-6 months.

Just to add we now have a new API on the block explorer for all coins. Below are the 2 APIs showing the coins that are in circulation and total coins including premine.

https://explorer.guldencoin.com/sapi/totalcoins --> Coins currently in circulation
https://explorer.guldencoin.com/sapi/totalcoins?type=all --> All coins including premines not taken.

I see Guldencoin is only countrycoin in top 100. We should be proud of this!

[TamiLee]

Hi All,

Coinmarketcap is now using our official block explorer and our figures are all showing correctly. Should you want to tip coinmarketcap for it's great service, below is the tip address.

Ok, everything should be updated now.  Thanks for your patience and the info!  

My address for tips: GRwZ9J8APhWZJLicXtv3T15oVUcWz4MCZ8

We are officially ranked 66 at the time of this message and our aim is to be stable top 50 currency within the next 3-6 months.

Just to add we now have a new API on the block explorer for all coins. Below are the 2 APIs showing the coins that are in circulation and total coins including premine.

https://explorer.guldencoin.com/sapi/totalcoins --> Coins currently in circulation
https://explorer.guldencoin.com/sapi/totalcoins?type=all --> All coins including premines not taken.

I see Guldencoin is only countrycoin in top 100. We should be proud of this!

Almost top 60 , but the team really needs to start pushing this algo change through so other projects like iOS can be finalized (which I believe the Algo change is causing the delay). It's like the coin is stuck between a rock and a hard place right now.

[Coincookie]

Gultoshi of Goshi  

My vote goes to Goshi!

[LTEX]

Hi All,

Coinmarketcap is now using our official block explorer and our figures are all showing correctly. Should you want to tip coinmarketcap for it's great service, below is the tip address.

Ok, everything should be updated now.  Thanks for your patience and the info!  

My address for tips: GRwZ9J8APhWZJLicXtv3T15oVUcWz4MCZ8

We are officially ranked 66 at the time of this message and our aim is to be stable top 50 currency within the next 3-6 months.

Just to add we now have a new API on the block explorer for all coins. Below are the 2 APIs showing the coins that are in circulation and total coins including premine.

https://explorer.guldencoin.com/sapi/totalcoins --> Coins currently in circulation
https://explorer.guldencoin.com/sapi/totalcoins?type=all --> All coins including premines not taken.

I see Guldencoin is only countrycoin in top 100. We should be proud of this!

Almost top 60 , but the team really needs to start pushing this algo change through so other projects like iOS can be finalized (which I believe the Algo change is causing the delay). It's like the coin is stuck between a rock and a hard place right now.

Exactly! That's why we don't need to worry and practice some patience. Coin isn't going anywhere, but will get a very good momentum once the (artificial) hard place is removed 

[Buerra]

Are we having some calm before the storm?

Possibly 

I know I've got something in the works that will be a first for the coin.  If all goes as planned, there will be some awesome Xmas presents for some people this year.

Here's a preview(I know you all like these mysterious hints):



-Fuse

I got word back, and this project will be ready around mid-November.  Here's another hint:

They would go 0.0381944444444444 fathoms deep if they were 25400 microns longer. 

-Fuse

I know, I know!

[Coincookie]

Are we having some calm before the storm?

Possibly 

I know I've got something in the works that will be a first for the coin.  If all goes as planned, there will be some awesome Xmas presents for some people this year.

Here's a preview(I know you all like these mysterious hints):



-Fuse

I got word back, and this project will be ready around mid-November.  Here's another hint:

They would go 0.0381944444444444 fathoms deep if they were 25400 microns longer. 

-Fuse

I know, I know!

I don't, I don't (have a freaking clue..)

C.

[veertje]

I got word back, and this project will be ready around mid-November.  Here's another hint:

They would go 0.0381944444444444 fathoms deep if they were 25400 microns longer. 

-Fuse

I know, I know!

I don't, I don't (have a freaking clue..)

C.

Me neither have a clue what this could be.... grrrr.

[Coincookie]

So 3/4 of an inch longer and it would go an inch deep? 

#fml..

[ny2cafuse]

So 3/4 of an inch longer and it would go an inch deep? 

#fml..

You're a little off on the math.

Buerra, make sure you keep it a surprise  .  I'm really excited to announce it when I can get actual pictures of it.

It's pretty exciting though.

-Fuse

[WaterLooDown]

Are we having some calm before the storm?

Possibly 

I know I've got something in the works that will be a first for the coin.  If all goes as planned, there will be some awesome Xmas presents for some people this year.

Here's a preview(I know you all like these mysterious hints):



-Fuse

I got word back, and this project will be ready around mid-November.  Here's another hint:

They would go 0.0381944444444444 fathoms deep if they were 25400 microns longer. 

-Fuse

I know, I know!

I don't, I don't (have a freaking clue..)

C.

Make that two of us. 

[Coincookie]

So 3/4 of an inch longer and it would go an inch deep? 

#fml..

You're a little off on the math.

Buerra, make sure you keep it a surprise  .  I'm really excited to announce it when I can get actual pictures of it.

It's pretty exciting though.

-Fuse

0.0381944444444444 fathoms

is 6,98cm isn't it?

25400 microns

equals 2,54cm equals an inch right?

#fml even more..

[LTEX]

Are we having some calm before the storm?

Possibly 

I know I've got something in the works that will be a first for the coin.  If all goes as planned, there will be some awesome Xmas presents for some people this year.

Here's a preview(I know you all like these mysterious hints):



-Fuse

I got word back, and this project will be ready around mid-November.  Here's another hint:

They would go 0.0381944444444444 fathoms deep if they were 25400 microns longer. 

-Fuse

I know, I know!

It's a Guldencoin tattoo right! Always wanted one for Christmas! 

[ny2cafuse]

It's a Guldencoin tattoo right! Always wanted one for Christmas! 

Yep.  I'm just starting out with tattooing, and that is the actual image of the one I tattooed on myself. 

-Fuse

[pijpenstelen]

It's a Guldencoin tattoo right! Always wanted one for Christmas! 

Yep.  I'm just starting out with tattooing, and that is the actual image of the one I tattooed on myself. 

-Fuse

hahaha... next it must be a QRcode

[Digithusiast]

Who can beat the current records? Be the fastest and earn NLG !

http://www.guldencoinpuzzel.nl/