mmpool.org - 1.5% fee DGM/PPS - tx fees/vardiff/merge mine/tor

[raskul]

20 days into this round and things are looking good as far as i can see;

My earnings of £28 per day average (~$43) - using the calc on bitcoinwisdom says i should have been running 9.7TH/s to get that earning.
currently i've got 8TH/s and i've been hashing as low as 4TH/s with a high of 13TH/s, so I reckon i'm above the average.

mmpool rocks, DGM rules. that is all.

ADD: that doesn't include my pps earnings of 0.14BTC for the duration of the round so far...

TELL ALL THE PEOPLE, mmpool is the place to mine!

[stan258]

--- mmpool.org ping statistics ---
packets transmitted 10
received 0
packet loss 100 %
time 8999 ms

I am looking for a smaller pool to point some stuff to but this wont cut it for me.  Sorry.  For now I will stick with BTC Guild and Bitminter.

[raskul]

--- mmpool.org ping statistics ---
packets transmitted 10
received 0
packet loss 100 %
time 8999 ms

I am looking for a smaller pool to point some stuff to but this wont cut it for me.  Sorry.  For now I will stick with BTC Guild and Bitminter.

what hardware are you trying to mine with? what difficulty setting are you using?

[stan258]

--- mmpool.org ping statistics ---
packets transmitted 10
received 0
packet loss 100 %
time 8999 ms

I am looking for a smaller pool to point some stuff to but this wont cut it for me.  Sorry.  For now I will stick with BTC Guild and Bitminter.

what hardware are you trying to mine with? what difficulty setting are you using?

I can risk pointing about 25 TH SP 20's and 3x's. Was going to take down half from Bitminter and BTC Guild respectively and the balance would be new stuff inbound this week. 

I should have not sold the Prismas and let them burn my data center down to collect insurance. 

It will be high latency for me to mine here.

I will keep watch on this round and this thread. 

Good Luck 

[raskul]

--- mmpool.org ping statistics ---
packets transmitted 10
received 0
packet loss 100 %
time 8999 ms

I am looking for a smaller pool to point some stuff to but this wont cut it for me.  Sorry.  For now I will stick with BTC Guild and Bitminter.

what hardware are you trying to mine with? what difficulty setting are you using?

I can risk pointing about 25 TH SP 20's and 3x's. Was going to take down half from Bitminter and BTC Guild respectively and the balance would be new stuff inbound this week. 

I should have not sold the Prismas and let them burn my data center down to collect insurance. 

It will be high latency for me to mine here.

I will keep watch on this round and this thread. 

Good Luck 

No problem. The sp-tech miners shouldn't have a problem here and you would need to set password on each as d=1024 then you would probably see no rejects.

For the 3x's - i hope you have a decent sprinkler system!

[philipma1957]

 Just rented 50th for 1 hour .  my fingers  are crossed

[raskul]

i've hit my DGM tickover on this round i'm afraid.. so renting now would be futile for me, as soon as any rental i take on ends, i'd tick back to 2.36... 

[raskul]

3 weeks. 

like a long holiday

[raskul]

Just rented 50th for 1 hour .  my fingers  are crossed

let us know how that SP20 fares on mmpool?

[philipma1957]

Just rented 50th for 1 hour .  my fingers  are crossed

let us know how that SP20 fares on mmpool?

I will test mmpool on tues.


the sp20e works fine.  but right now a lot of my gear has rolled over and off mmpool  is there an issue with the pool?

[raskul]

Just rented 50th for 1 hour .  my fingers  are crossed

let us know how that SP20 fares on mmpool?

I will test mmpool on tues.


the sp20e works fine.  but right now a lot of my gear has rolled over and off mmpool  is there an issue with the pool?

looks like you may catch up, if not overtake me on shares submitted in the next day. 2 of my SP10's are being shipped back from hosting and my SP20 is still 'on holiday'(™).

[philipma1957]

Just rented 50th for 1 hour .  my fingers  are crossed

let us know how that SP20 fares on mmpool?

I will test mmpool on tues.


the sp20e works fine.  but right now a lot of my gear has rolled over and off mmpool  is there an issue with the pool?

looks like you may catch up, if not overtake me on shares submitted in the next day. 2 of my SP10's are being shipped back from hosting and my SP20 is still 'on holiday'(™).

I just ordered another s20E

I used your referral  link.

[raskul]

Just rented 50th for 1 hour .  my fingers  are crossed

let us know how that SP20 fares on mmpool?

I will test mmpool on tues.


the sp20e works fine.  but right now a lot of my gear has rolled over and off mmpool  is there an issue with the pool?

looks like you may catch up, if not overtake me on shares submitted in the next day. 2 of my SP10's are being shipped back from hosting and my SP20 is still 'on holiday'(™).

I just ordered another s20E

I used your referral  link.

Thanks again.
Bleary eyed and not out of bed yet; we hit a block yet?

[djemphol]

First dgm pool for me as a newbie miner....hope it would be good 
Regards.

[xZork]

First dgm pool for me as a newbie miner....hope it would be good 
Regards.

Just have patience. (:

[temen]

I found rentals! =)

[raskul]

I found rentals! =)

haha. well find a block!

[djemphol]

I've rented some rigs for this pool and placed my own 2 machines from home to this pool, why the hashing speed from the rented machine is not as good as advertised?
I'm using a standard diff rate at home (just "x" for the password) and my machines are doing good. Do we have to set up for a specific diff rate or something?
Thank You for any advises.

[raskul]

I've rented some rigs for this pool and placed my own 2 machines from home to this pool, why the hashing speed from the rented machine is not as good as advertised?
I'm using a standard diff rate at home (just "x" for the password) and my machines are doing good. Do we have to set up for a specific diff rate or something?
Thank You for any advises.

 mmpool will take a couple of hours to show your full power.

If you can be more specific which miners you have pointed, i can possibly help with diff levels to use?


I set my s3's at d=160
My sp10's at d=1024
My sp20 at d=1024

[djemphol]

 mmpool will take a couple of hours to show your full power.

If you can be more specific which miners you have pointed, i can possibly help with diff levels to use?


I set my s3's at d=160
My sp10's at d=1024
My sp20 at d=1024

Thanks a lot for your reply raskul.

My S1 and S2 are at home, both are using the "x" only for the password but the hashing speed is good at average as pasted below.



Elapsed    GH/S(5s)    GH/S(avg)
12h14m55s  1,013.79    1,005.85

Do i have to set d=256 for S1 and d=1024 for S2?

While 3 of my rented rigs are pulled back to slushpool since the hashing rate are horrible and i'm not quite sure about the machine type,they could be form a farm or something....or do we have to set their diff base according to their advertised hashing speed?

Once again, thank you.