[ANN] (WC) | WhiteCoin | BIG NEWS: Foundation, investors & more ☯ whitecoin.info

[dida]

I also think the wallet needs some work on, so its easier to use for the masses.
Adding all the nice features some of the other coins have, like - unlock button, coin control, no need for .conf file and maybe a bit more stylish looks.
I personally would donate towards such improvements.

+1

[1714769307]

1714769307

[ptic-1]

I also think the wallet needs some work on, so its easier to use for the masses.
Adding all the nice features some of the other coins have, like - unlock button, coin control, no need for .conf file and maybe a bit more stylish looks.
I personally would donate towards such improvements.

something slick like that,,,IN white



wallet itself  should say,, buy me  and put me in this candy

[sgtstedanko]

I also think the wallet needs some work on, so its easier to use for the masses.
Adding all the nice features some of the other coins have, like - unlock button, coin control, no need for .conf file and maybe a bit more stylish looks.
I personally would donate towards such improvements.

+1

Giving total balance would be nice too...i.e.  Balance, staking and immature totals

[dida]

any idea when bittrex opens the wallet? Want get my wc to cold storage  

Bittrex opening tommorow...here is they answer to my tweet:

Richie Lai ‏@richiela  4h
@Retardinjo2 @BittrexExchange we are working through a problem with the devs hopefully in the next 24 hours -just want to make sure its safe

[DanielVG]

still crashing  



Downloaded the new wallet and fixed config file, no luck...  

anybody ideas?

Hmmm...the new wallet hasn't given me any problems. it even found my old wallet.dat by itself and started using it.

if you really can't get it to work the easiest fix is to just put your coins on an exchange, delete everything and just start again with new wallet. it's not worth the headache trying to fix something if it's that messed up.

How can I send coins if my wallet doesn't sync? it needs to be synced first to send coins.
I've tried 20 times, even fresh installs on new computers.  The same error occurs every time at the same block.
My wallet.dat file is corrupt i think.    I have 10 strange transactions below 0 with (N/A) as address, when the wallet reaches these blocks it crashes.  Even with the old wallet it stops updating in the end, it doesn't crash but gets stuck around 17205.

Anyone has experience extracting private keys from a wallet.dat and putting them in a clean .dat file?
It's not a small amount i have    
10K bounty for the one who can help me.

[rudius]

still crashing  



Downloaded the new wallet and fixed config file, no luck...  

anybody ideas?

Hmmm...the new wallet hasn't given me any problems. it even found my old wallet.dat by itself and started using it.

if you really can't get it to work the easiest fix is to just put your coins on an exchange, delete everything and just start again with new wallet. it's not worth the headache trying to fix something if it's that messed up.

How can I send coins if my wallet doesn't sync? it needs to be synced first to send coins.
I've tried 20 times, even fresh installs on new computers.  The same error occurs every time at the same block.
My wallet.dat file is corrupt i think.    I have 10 strange transactions below 0 with (N/A) as address, when the wallet reaches these blocks it crashes.  Even with the old wallet it stops updating in the end, it doesn't crash but gets stuck around 17205.

Anyone has experience extracting private keys from a wallet.dat and putting them in a clean .dat file?
It's not a small amount i have    
10K bounty for the one who can help me.

If you tried fresh install, i don t know what your problems are.

You can extract your coins. Be sure to have all the adresses of where your coins are. You can check the coins in your adresses with a block explorer. After that you can dump the private key from any adresses you have in your wallet.dat.
The difficult part is to gather all adresses where there is your coins.

[rocketcoins]

still crashing  



Downloaded the new wallet and fixed config file, no luck...  

anybody ideas?

Hmmm...the new wallet hasn't given me any problems. it even found my old wallet.dat by itself and started using it.

if you really can't get it to work the easiest fix is to just put your coins on an exchange, delete everything and just start again with new wallet. it's not worth the headache trying to fix something if it's that messed up.

How can I send coins if my wallet doesn't sync? it needs to be synced first to send coins.
I've tried 20 times, even fresh installs on new computers.  The same error occurs every time at the same block.
My wallet.dat file is corrupt i think.    I have 10 strange transactions below 0 with (N/A) as address, when the wallet reaches these blocks it crashes.  Even with the old wallet it stops updating in the end, it doesn't crash but gets stuck around 17205.

Anyone has experience extracting private keys from a wallet.dat and putting them in a clean .dat file?
It's not a small amount i have    
10K bounty for the one who can help me.

just came across this if its any help http://bitcoin.stackexchange.com/a/21095
it says its for bitcoin but i would think the dumpprivkey/importprivkey command info would be the same
just be sure to save your original wallet.dat somewhere just in case i'm wrong.

[mogonzo]

I also think the wallet needs some work on, so its easier to use for the masses.
Adding all the nice features some of the other coins have, like - unlock button, coin control, no need for .conf file and maybe a bit more stylish looks.
I personally would donate towards such improvements.

+1

Giving total balance would be nice too...i.e.  Balance, staking and immature totals

I've been giving that some thought actually. Our current push is to pay the devs for existing work with our fundraising, but we could start a 2nd foundation WC address for those who wish to donate towards future development?

[kosaet]

My question for the wallet and Pos was , because i cant get mine coins from poloniex 3 days , still frozen. If the wallet work, why they not unfrozen WC ? Mintpall works fine ..... I withdrawal all mine other coins from polo, only WC left, i am really angry right now .......

Mogonzo, can you ask poloniex why WC is still frozen ?

[MickeNorsk]

still crashing  



Downloaded the new wallet and fixed config file, no luck...  

anybody ideas?

Hmmm...the new wallet hasn't given me any problems. it even found my old wallet.dat by itself and started using it.

if you really can't get it to work the easiest fix is to just put your coins on an exchange, delete everything and just start again with new wallet. it's not worth the headache trying to fix something if it's that messed up.

How can I send coins if my wallet doesn't sync? it needs to be synced first to send coins.
I've tried 20 times, even fresh installs on new computers.  The same error occurs every time at the same block.
My wallet.dat file is corrupt i think.    I have 10 strange transactions below 0 with (N/A) as address, when the wallet reaches these blocks it crashes.  Even with the old wallet it stops updating in the end, it doesn't crash but gets stuck around 17205.

Anyone has experience extracting private keys from a wallet.dat and putting them in a clean .dat file?
It's not a small amount i have    
10K bounty for the one who can help me.

I suggest you go into http://webchat.freenode.net/?channels=#whitecoinfoundation
Then PM mogonzo, OdinYggd, majika, asoom, tell them about your problem. They might have a solution.

[Khelgaar]

still crashing  



Downloaded the new wallet and fixed config file, no luck...  

anybody ideas?

DanielVG, did U try to delete config file ( not fix ) and update wallet without it. Was doing the same with my wallet,
everything OK now

[playah]

My question for the wallet and Pos was , because i cant get mine coins from poloniex 3 days , still frozen. If the wallet work, why they not unfrozen WC ? Mintpall works fine ..... I withdrawal all mine other coins from polo, only WC left, i am really angry right now .......

Mogonzo, can you ask poloniex why WC is still frozen ?

 It's frozen at Bittrex also, good question why still frozen if we have working wallet.
 I've had my wallet open for a while and not locked, how long do I have to wait for it to stake ?

 Oh wallet has started staking, nice !!!

[DanielVG]

still crashing  



Downloaded the new wallet and fixed config file, no luck...  

anybody ideas?

Hmmm...the new wallet hasn't given me any problems. it even found my old wallet.dat by itself and started using it.

if you really can't get it to work the easiest fix is to just put your coins on an exchange, delete everything and just start again with new wallet. it's not worth the headache trying to fix something if it's that messed up.

How can I send coins if my wallet doesn't sync? it needs to be synced first to send coins.
I've tried 20 times, even fresh installs on new computers.  The same error occurs every time at the same block.
My wallet.dat file is corrupt i think.    I have 10 strange transactions below 0 with (N/A) as address, when the wallet reaches these blocks it crashes.  Even with the old wallet it stops updating in the end, it doesn't crash but gets stuck around 17205.

Anyone has experience extracting private keys from a wallet.dat and putting them in a clean .dat file?
It's not a small amount i have    
10K bounty for the one who can help me.

I suggest you go into http://webchat.freenode.net/?channels=#whitecoinfoundation
Then PM mogonzo, OdinYggd, majika, asoom, tell them about your problem. They might have a solution.

thanks, i'll do that when i have some time.

in the debug.txt file i found this in the end, maybe someone has an idea.

Code:

ERROR: ProcessBlock() : AcceptBlock FAILED
received block 00000000ddcb19d7c3e7
ERROR: AcceptBlock() : AddToBlockIndex failed
ERROR: ProcessBlock() : AcceptBlock FAILED
received block 00000000e84fca432fc9
ERROR: AcceptBlock() : AddToBlockIndex failed
ERROR: ProcessBlock() : AcceptBlock FAILED
received block 00000000392d8d059329
ERROR: AcceptBlock() : AddToBlockIndex failed
ERROR: ProcessBlock() : AcceptBlock FAILED
received block 00000001132f1b4b6b63
ERROR: AcceptBlock() : AddToBlockIndex failed
ERROR: ProcessBlock() : AcceptBlock FAILED
received block 0000000135b87371f592
ERROR: AcceptBlock() : AddToBlockIndex failed
ERROR: ProcessBlock() : AcceptBlock FAILED
received block 00000000f02838c37727
ERROR: AcceptBlock() : AddToBlockIndex failed
ERROR: ProcessBlock() : AcceptBlock FAILED


************************
EXCEPTION: St13runtime_error       
CDB() : can't open database file wallet.dat, error -30974       
C:\whitecoin\whitecoin-qt.exe in ThreadStakeMinter()       

ERROR: FetchInputs() : 2534c0a147 mempool Tx prev not found 5763c2cbe1
stored orphan tx 2534c0a147 (mapsz 2)

[surfguy72]

still crashing  



Downloaded the new wallet and fixed config file, no luck...  

anybody ideas?

Hmmm...the new wallet hasn't given me any problems. it even found my old wallet.dat by itself and started using it.

if you really can't get it to work the easiest fix is to just put your coins on an exchange, delete everything and just start again with new wallet. it's not worth the headache trying to fix something if it's that messed up.

How can I send coins if my wallet doesn't sync? it needs to be synced first to send coins.
I've tried 20 times, even fresh installs on new computers.  The same error occurs every time at the same block.
My wallet.dat file is corrupt i think.    I have 10 strange transactions below 0 with (N/A) as address, when the wallet reaches these blocks it crashes.  Even with the old wallet it stops updating in the end, it doesn't crash but gets stuck around 17205.

Anyone has experience extracting private keys from a wallet.dat and putting them in a clean .dat file?
It's not a small amount i have    
10K bounty for the one who can help me.

I had something similar happen.  Turns out, my shortcut to Whitecoin pointed to an old version, not the new version. Double check your version number.

[xuser]

My question for the wallet and Pos was , because i cant get mine coins from poloniex 3 days , still frozen. If the wallet work, why they not unfrozen WC ? Mintpall works fine ..... I withdrawal all mine other coins from polo, only WC left, i am really angry right now .......

Mogonzo, can you ask poloniex why WC is still frozen ?

+1

[DanielVG]

I FIXED IT
 

Fix was easier than i thought.

I removed my original wallet and synced the blockchain with an empty wallet.
Then i replaced the wallet again once the blockchain was completely downloaded.
Now i'm synced again.

PHEWY!!!

[DanielVG]

aaaaaaaand it crashed again 

coming closer though, maybe i can send my coins to an exchange.

[cleanbaldy]

I FIXED IT
 

Fix was easier than i thought.

I removed my original wallet and synced the blockchain with an empty wallet.
Then i replaced the wallet again once the blockchain was completely downloaded.
Now i'm synced again.

PHEWY!!!

Nice!  Thanks for posting the fix, in case someone else runs into the same issue!

That's super easy

[MickeNorsk]

aaaaaaaand it crashed again  

coming closer though, maybe i can send my coins to an exchange.

Try this:

1. Delete everything. (except the wallet containing your whitecoin of course, backup it on your desktop for example)
2. Install new wallet.
3. Copy your wallet address to a notepad and then exit the wallet.
4. Backup that same wallet.dat.
5. Replace your wallet.dat with the one containing your whitecoin.
6. Startup the wallet again and quickly send 1 whitecoin to the address you just wrote down in notepad.
7. Quickly exit the wallet after you send.
8. Check the explorer in 5-10 min if the address you sent to recieved the whitecoin. If they did, then send the rest

Here's the explorer: http://cryptexplorer.com/chain/WhiteCoin
Just paste your address in the search bar.

[x8008]

anyone know what this means when I try to unlock staking

Code:

Error: running with an unencrypted wallet, but walletpassphrase was called. (code -15)