vabchgent
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 24, 2015, 03:04:39 AM Last edit: February 24, 2015, 05:15:09 PM by vabchgent |
|
I ran into a small problem - I know what a surprise
In crypto glance MY pool is showing as BTC guild but I am running on nicehash. The miners are on nice hash checked web interface. How do I get crypto glance to show the right pool again. Also closed out and opened Cryptoglance. The Miners in question are S3+ and the Api is turned on. Thanks in advance
By chance did your miners fail-over to nicehash? It actually failed back to nice hash I believe. My failover is from nice to btc -e . Just using this as an example. So I switched back or went back to nice hash and crypto glance is still showing btc-e but the miners are on nice hash. Update I reset the stats and it shows the correct pool in Cryptoglance.
|
|
|
|
cryptoglance (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 24, 2015, 07:22:01 PM |
|
It actually failed back to nice hash I believe. My failover is from nice to btc -e . Just using this as an example. So I switched back or went back to nice hash and crypto glance is still showing btc-e but the miners are on nice hash.
Update I reset the stats and it shows the correct pool in Cryptoglance.
Interesting.... I'll look into why that might be happening. Might be a cgminer issue with reporting the active pool, but good to know a reset corrects it. Good news: Antpool and Slush pool have been added to cryptoglance. A Nightly update will be released in the next few days.
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 24, 2015, 11:03:19 PM |
|
Looks like a good piece of software, will give it a try tonight.
|
|
|
|
Xircom
Legendary
Offline
Activity: 938
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2015, 12:10:10 PM |
|
I installed it on my Synology NAS (409) works great.
Notes:
Few bugs in 1.1.0 in that the monitoring doesn't disable. And some interface glitches when adding miners, but fixable.
Would like the HW error monitoring to be % based rather than a fixed number, because ASIC miners have HW errors in the 1,000's but the overall % is usually less than 1% to be acceptable.
Would be great to have email alerts for the monitoring.
Otherwise I donated, everyone who uses this should too its awesome!
How did you do that ?
|
BTC: 1MyJmxS9ER5ZBNvpG3LhoUXGotpzbPowed
|
|
|
Biffa
Legendary
Online
Activity: 3220
Merit: 1220
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2015, 03:54:54 PM |
|
I installed it on my Synology NAS (409) works great.
Notes:
Few bugs in 1.1.0 in that the monitoring doesn't disable. And some interface glitches when adding miners, but fixable.
Would like the HW error monitoring to be % based rather than a fixed number, because ASIC miners have HW errors in the 1,000's but the overall % is usually less than 1% to be acceptable.
Would be great to have email alerts for the monitoring.
Otherwise I donated, everyone who uses this should too its awesome!
How did you do that ? Just turned on web services, and unzipped the archive into the /web directory into a folder called cryptoglance Setup an additional port, say Port 81 and then think I went into the php settings and turned on the php extensions for sockets. Can't really remember the rest, but I can compare settings if you get into trouble.
|
|
|
|
Bazeman
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2015, 04:07:52 PM |
|
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2015, 05:12:09 PM |
|
Can this software monitor USB devices? I watched your setup video and it shows you entering IP addresses for the miners, but my USB miners do not have an IP address. Thank you.
|
|
|
|
Biffa
Legendary
Online
Activity: 3220
Merit: 1220
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2015, 05:53:10 PM |
|
Can this software monitor USB devices? I watched your setup video and it shows you entering IP addresses for the miners, but my USB miners do not have an IP address. Thank you.
Yes it can, your USB devices are controlled by a computer running cgminer or bfgminer, you just have to turn API access on and then use the ip address of the computer running the mining software. You'll have to allow API access on the client config and adjust any firewall settings on the computer to allow external connections to the API ports.
|
|
|
|
cryptoglance (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 02, 2015, 07:16:27 AM |
|
A new Nightly update has been rolled out.
[ v2.0.2.742 ]
FEATURES ======== - Added New Zealand Dollar as a Fiat option in wallets - Added current FIAT price of a coin
COINS ===== - [+COIN] DogeCoin Dark
POOLS ===== - [+POOL] BitcoinCZ aka Slush - [+POOL] AntPool - [+POOL] BitMinter
HOTFIXES ======== - Removed useless BTC column when looking at a BTC wallet
|
|
|
|
stonebone
Newbie
Offline
Activity: 45
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 05, 2015, 03:39:31 PM |
|
First of all, great stuff!
Really like it, bought also the Andriod App to show support.
It's almost perfect, just 2 things I'd like to be added/fixed:
- Pool stats for CKPool are a bit thin, more info is available via API, which is displayed for other pools (main info missing for me is "time since last block"). - Coinbase Wallets don't show correctly, very weired, somethime nothing, then some random number not corrolating at all to the actual balance. Maybe use API to get correct values?
Anyway, thanks for this great Tool!
Cheers
|
|
|
|
cryptoglance (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 05, 2015, 03:57:39 PM |
|
First of all, great stuff!
Really like it, bought also the Andriod App to show support.
Thanks stonebone! - Pool stats for CKPool are a bit thin, more info is available via API, which is displayed for other pools (main info missing for me is "time since last block").
- We'll revisit the CKPool API, see what else we can pull that will be useful, especially a "time since last block" - Coinbase Wallets don't show correctly, very weired, somethime nothing, then some random number not corrolating at all to the actual balance. Maybe use API to get correct values?
- Coinbase move your coin from a provided address to a cold-storage wallet, that's why the blockchain reports odd amounts. We will be implementing coinbase in the nearish future.
|
|
|
|
crazyearner
Legendary
Offline
Activity: 1820
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2015, 07:20:21 PM |
|
Any chance to support Burstcoin on this with Proof Of capacity with Hard drive mining ?
|
|
|
|
cryptoglance (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2015, 07:35:00 PM |
|
Any chance to support Burstcoin on this with Proof Of capacity with Hard drive mining ?
Thanks for the request. I just reached out to burstcoin.eu in regards to an API that cryptoglance can use. I'll let you know what the response is from those developers.
|
|
|
|
josef2000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 07, 2015, 07:59:38 PM |
|
WOW! I love the design! Gonna use it for my miners now
|
██████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████
|
|
|
crazyearner
Legendary
Offline
Activity: 1820
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 08, 2015, 03:05:46 AM |
|
Any chance to support Burstcoin on this with Proof Of capacity with Hard drive mining ?
Thanks for the request. I just reached out to burstcoin.eu in regards to an API that cryptoglance can use. I'll let you know what the response is from those developers. Nice I will speak to the dev team too and see what response I can get from them and see if can get them over here to this thread to get something worked out as would be nice to see your system working with burstcoin as its simple to use across all other coins and miners.
|
|
|
|
Irontiga
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 08, 2015, 03:09:42 AM |
|
Any chance to support Burstcoin on this with Proof Of capacity with Hard drive mining ?
Thanks for the request. I just reached out to burstcoin.eu in regards to an API that cryptoglance can use. I'll let you know what the response is from those developers. burstcoin.eu only one dev(not me). If you want api....PM me https://block.burstcoin.info .. if u want pool api calls.....pm me as well...i am involved with burst.ninja
|
|
|
|
cryptoglance (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 08, 2015, 08:04:07 AM |
|
WOW! I love the design! Gonna use it for my miners now
Great! Let us know what your thoughts are and what more you want to see ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Nice I will speak to the dev team too and see what response I can get from them and see if can get them over here to this thread to get something worked out as would be nice to see your system working with burstcoin as its simple to use across all other coins and miners.
Just heard back from them. There is currently no API available on http://burstcoin.eu/ ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) burstcoin.eu only one dev(not me). If you want api....PM me https://block.burstcoin.info .. if u want pool api calls.....pm me as well...i am involved with burst.ninja I've sent you a PM ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
vabchgent
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 09, 2015, 07:03:30 PM |
|
@cryptoglance would be nice to have the coinbase wallet being shown Hint hint ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
vabchgent
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 11, 2015, 03:16:48 AM |
|
I ran into a small problem - I know what a surprise
In crypto glance MY pool is showing as BTC guild but I am running on nicehash. The miners are on nice hash checked web interface. How do I get crypto glance to show the right pool again. Also closed out and opened Cryptoglance. The Miners in question are S3+ and the Api is turned on. Thanks in advance
By chance did your miners fail-over to nicehash? I used the switch pool button today and had to reset the stats for it to see the new pool so I would have to say the problem is still occurring. Its just the stats though the pool does switch just shows the previous pool. Thanks
|
|
|
|
crazyearner
Legendary
Offline
Activity: 1820
Merit: 1001
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
March 11, 2015, 11:02:51 PM |
|
WOW! I love the design! Gonna use it for my miners now
Great! Let us know what your thoughts are and what more you want to see ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Nice I will speak to the dev team too and see what response I can get from them and see if can get them over here to this thread to get something worked out as would be nice to see your system working with burstcoin as its simple to use across all other coins and miners.
Just heard back from them. There is currently no API available on http://burstcoin.eu/ ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) burstcoin.eu only one dev(not me). If you want api....PM me https://block.burstcoin.info .. if u want pool api calls.....pm me as well...i am involved with burst.ninja I've sent you a PM ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) did you get a response from the devs over at the blockchain and pool yet or still awaiting to hear back. Would be nice to get this running would be a good tool to have to monitor burstcoin and also change or reboot miners if your software support such things.
|
|
|
|
|