Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 16, 2015, 04:31:52 AM |
|
(1) I noticed today that if one of my miners goes zombie (like U3s are apt to do), it takes a long, long time, >24 hours at least, for it's hash to disappear from reported averages. See below, after running all day with a zombied U3 it's still reporting 35gh/s ave instead of the 8gh/s that was actually happening. My U3 runs about 50gh/s, so you can see that after 16 hours it's still reporting 27gh/s average too high. Same thing for the global average in the upper right. (2) If I restart the miner without stopping cgminer, then it comes back at full power and it's hash gets added to the averages; it doesn't replace it's pre-zombie average. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi60.tinypic.com%2F14c79g1.jpg&t=665&c=PbY6tq3FHBslFA) I think that if a machine goes zombie it's average hash should be removed from these displays. This would also make it easier to notice if a miner is down, because the global average would reflect it instantly.
|
|
|
|
maracuchoff
Newbie
Offline
Activity: 42
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 17, 2015, 05:17:44 PM |
|
I want to see from my phone android mining activity when I balance my house, there is a tutorial on youtube on how to set?
|
|
|
|
vabchgent
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 18, 2015, 04:33:58 PM |
|
I want to see from my phone android mining activity when I balance my house, there is a tutorial on youtube on how to set?
Best bet download mobile miner from here http://www.mobileminerapp.com/Set up an account - Set the code in cryptoglance. Available in the latest build. Tools>Cryptoglance settings>mobile miner user email for Mobile miner mrsmith@anymail.com and code xxx-xxxx-xxx Option 2 port forward your router to the cryptoglance instance on port 4014.
|
|
|
|
vabchgent
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 18, 2015, 04:36:53 PM |
|
@cryptoglance Looks like the miners are still loading up takes about a week or two. Like the API is loading up any / all miners go offline or hang. I know I should restart my miners every so often. But putting it out there if you have any ideas. Thanks
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 18, 2015, 05:44:09 PM |
|
I want to see from my phone android mining activity when I balance my house, there is a tutorial on youtube on how to set?
Best bet download mobile miner from here http://www.mobileminerapp.com/Set up an account - Set the code in cryptoglance. Available in the latest build. Tools>Cryptoglance settings>mobile miner user email for Mobile miner mrsmith@anymail.com and code xxx-xxxx-xxx Option 2 port forward your router to the cryptoglance instance on port 4014. Just use the cryptoGlance app, no need for mobile miner.
|
|
|
|
cryptoglance (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 18, 2015, 09:15:22 PM |
|
Hey Everyone, Just letting you know we're still around, just fairly busy. We're looking at this zombie device issue as closely as possible. All rig information displayed in cryptoglance is a result of the data provided by the cgminer/bfgminer API, which makes this a little difficult to resolve. Our current plan is to compare devices by serial number, however some asic devices (eg: gridseed and DualMiner) sometimes have the same serial number. We're still working on a solution for this, hopefully 1 more week and we can push out an updated Nightly build. As for the major release, tomorrow we will be moving the current beta to Major Release. Shortly after that (about a week) you'll see some more updates coming out. These updates will contain some functionality such as a Pool Picker panel ( http://poolpicker.eu/), and ability to minimize panels. Here's a screenshot: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FTb6l4eD.png&t=665&c=7PLAEBh48mw-DA)
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 18, 2015, 10:10:08 PM |
|
Great, thanks for the update, looking forward to the new version! We're looking at this zombie device issue as closely as possible. All rig information displayed in cryptoglance is a result of the data provided by the cgminer/bfgminer API, which makes this a little difficult to resolve.
I noticed that the average is only additive in the global average box, not in the rig box. In the rig box when the zombie resets, the rig average is displayed correctly, but the global average box still shows high. Hopefully that helps narrow it down.
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 19, 2015, 08:29:46 PM |
|
Just now I restarted my miner in CG since the U3 had gone zombie and it cleared the bunk contribution to the global average display. Next time I will try just resetting stats and see if that fixes it, too.
|
|
|
|
vabchgent
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2015, 07:00:35 PM |
|
@cryptoglance pool picker looks interesting.Thanks
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 21, 2015, 10:56:16 PM |
|
@cryptoglance pool picker looks interesting.Thanks
unfortunately with the pools they list you would make more just leaving your miner on antpool
|
|
|
|
vabchgent
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 25, 2015, 11:57:16 PM |
|
@cryptoglance pool picker looks interesting.Thanks
unfortunately with the pools they list you would make more just leaving your miner on antpool Have you checked your payment on Antpool the past 2 days. @Cryptoglance the pool picker will be our pool choices?
|
|
|
|
cryptoglance (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 26, 2015, 03:43:47 AM |
|
@cryptoglance pool picker looks interesting.Thanks
unfortunately with the pools they list you would make more just leaving your miner on antpool Have you checked your payment on Antpool the past 2 days. @Cryptoglance the pool picker will be our pool choices? With the downtime of Bitcointalk, we held back the release as this is the primary outlet of bug reports. Pool Picker is just a website that tracks pools and determines the highest payout
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 26, 2015, 06:07:49 PM |
|
With the downtime of Bitcointalk, we held back the release as this is the primary outlet of bug reports.
And I'm holding back my summer power down until I can minimize panels. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
cryptoglance (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2015, 03:32:18 AM |
|
Version 2.1 has been released. [ v2.1 ]
FEATURES ======== - MobileMiner support. Can be enabled via Settings. http://www.mobileminerapp.com/ - Added app specific way to zoom in/out - Zoom Out: CTRL + < - Zoom In: CTRL + > - Reset Zoom: CTRL + / - Added manual update check in Settings page - Added New Zealand Dollar as a Fiat option in wallets - Added current FIAT price of a coin - NOMP now detects the coin being mined for a specific address. Useful for profit-switching pools - Pools have Offline mode. If no data is returned, or fails to connect, it is "offline"
POOLS ===== - [+POOL] AntPool - [+POOL] BitMinter - [+POOL] Burst.Ninja - [+POOL] BitcoinCZ aka Slush - [+POOL] NiceHash/WestHash - [+POOL] P2Pool
POOLS ===== - [+POOL] NiceHash/WestHash - [+POOL] BitcoinCZ aka Slush - [+POOL] AntPool - [+POOL] BitMinter - [+POOL] P2Pool
ALGORITHMS ========== - [+Algorithm] Blake-256 - [+Algorithm] Groestl - [+Algorithm] Jackpot - [+Algorithm] Lyra2RE - [+Algorithm] Neos-Blake - [+Algorithm] NeoScrypt - [+Algorithm] WHIRL - [+Algorithm] X17
COINS ===== - [+COIN] Burstcoin - [+COIN] DogeCoin Dark
HOTFIXES ======== - Changed from BitcoinIndex.es to FirstRally.com - Fixed issue with Bitcoin Affiliate Network saving an empty name/label - Fixed incorrect reporting of rejected share warning - Added permission checking to the update process - Fixed permissionfix script, should correctly set permissions on parent folder - Fixed issue with pools not loading sometimes - Added round duration to CKPool - Fixed incorrect BTC Guild pool hashrate - Fixed incorrect BTC Guild worker count - Removed useless BTC column when looking at a BTC wallet - Update page will now display correctly for those with slow connections - Attempt to fix issue where the update.zip does not delete in some cases - Fixed issue where offline rigs would randomly appear/disappear in the overview panel - Fixed issue with Antpool on Windows - Fixed issue when using only 1 rig - Padded the time-out for users with 60+ rigs - Fixed issue with Linux users who do not have posix installed
KNOWN ISSUES ============ - Users with lots of rigs may experience a long start-up time - Miner Failover may report incorrect active pool - Wallets can take a long time to load
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 27, 2015, 05:41:32 AM |
|
Version 2.1 has been released.
Thanks, updating now!
|
|
|
|
davidrentaobition
Newbie
Offline
Activity: 16
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 28, 2015, 10:26:50 PM |
|
please let me know how to updata. it's show"error:failed to create the directcry:update\2.1.0.4-beta and i using 2.0.2 now. thanks you share... davidrentao Version 2.1 has been released. [ v2.1 ]
FEATURES ======== - MobileMiner support. Can be enabled via Settings. http://www.mobileminerapp.com/ - Added app specific way to zoom in/out - Zoom Out: CTRL + < - Zoom In: CTRL + > - Reset Zoom: CTRL + / - Added manual update check in Settings page - Added New Zealand Dollar as a Fiat option in wallets - Added current FIAT price of a coin - NOMP now detects the coin being mined for a specific address. Useful for profit-switching pools - Pools have Offline mode. If no data is returned, or fails to connect, it is "offline"
POOLS ===== - [+POOL] AntPool - [+POOL] BitMinter - [+POOL] Burst.Ninja - [+POOL] BitcoinCZ aka Slush - [+POOL] NiceHash/WestHash - [+POOL] P2Pool
POOLS ===== - [+POOL] NiceHash/WestHash - [+POOL] BitcoinCZ aka Slush - [+POOL] AntPool - [+POOL] BitMinter - [+POOL] P2Pool
ALGORITHMS ========== - [+Algorithm] Blake-256 - [+Algorithm] Groestl - [+Algorithm] Jackpot - [+Algorithm] Lyra2RE - [+Algorithm] Neos-Blake - [+Algorithm] NeoScrypt - [+Algorithm] WHIRL - [+Algorithm] X17
COINS ===== - [+COIN] Burstcoin - [+COIN] DogeCoin Dark
HOTFIXES ======== - Changed from BitcoinIndex.es to FirstRally.com - Fixed issue with Bitcoin Affiliate Network saving an empty name/label - Fixed incorrect reporting of rejected share warning - Added permission checking to the update process - Fixed permissionfix script, should correctly set permissions on parent folder - Fixed issue with pools not loading sometimes - Added round duration to CKPool - Fixed incorrect BTC Guild pool hashrate - Fixed incorrect BTC Guild worker count - Removed useless BTC column when looking at a BTC wallet - Update page will now display correctly for those with slow connections - Attempt to fix issue where the update.zip does not delete in some cases - Fixed issue where offline rigs would randomly appear/disappear in the overview panel - Fixed issue with Antpool on Windows - Fixed issue when using only 1 rig - Padded the time-out for users with 60+ rigs - Fixed issue with Linux users who do not have posix installed
KNOWN ISSUES ============ - Users with lots of rigs may experience a long start-up time - Miner Failover may report incorrect active pool - Wallets can take a long time to load
|
|
|
|
cryptoglance (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 28, 2015, 10:44:14 PM |
|
please let me know how to updata. it's show"error:failed to create the directcry:update\2.1.0.4-beta
and i using 2.0.2 now.
thanks you share...
davidrentao
Are you using the Windows App or on a linux machine? Based on the slash above, it looks like windows...
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 28, 2015, 11:47:29 PM |
|
please let me know how to updata. it's show"error:failed to create the directcry:update\2.1.0.4-beta
and i using 2.0.2 now.
thanks you share...
davidrentao
I had that problem, and here is the solution that was posted that worked for me (#2): First try these steps: 1) Run the app as administrator and try to update 2) If 1 doesn't work, Navigate to: C:\cryptroglance\application\. If there is an "update" folder, delete it and try to run the update again.
|
|
|
|
davidrentaobition
Newbie
Offline
Activity: 16
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 30, 2015, 09:17:35 PM |
|
please let me know how to updata. it's show"error:failed to create the directcry:update\2.1.0.4-beta
and i using 2.0.2 now.
thanks you share...
davidrentao
I had that problem, and here is the solution that was posted that worked for me (#2): First try these steps: 1) Run the app as administrator and try to update 2) If 1 doesn't work, Navigate to: C:\cryptroglance\application\. If there is an "update" folder, delete it and try to run the update again.
thanks lots. i make out problem, it's very stable now, however, if cryptroglance support to ccminer, it's perfect for all people!!! i thought many people hold nvidia cards ot mining after time, please consider it.
|
|
|
|
Real-Duke
Legendary
Offline
Activity: 3472
Merit: 2286
Top Crypto Casino
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 31, 2015, 05:19:03 PM |
|
Sorry for the maybe stupid question but cryptoglance shows all my 4 S3 miners and the correct pool/hashspeed But I just tried for the first time to make a pool switch to the second pool in the list and nothings appears/changes after saving. Trying to make a restart ends in the same result. Looks like I have no remote control but all works fine if I do it on the miner webinterface. Any suggestions? Thanks in advance
|
|
|
|
|