[BBR] Boolberry: Privacy and Security - Guaranteed Since 2014

[jl777]

I redid the configure with:
./configure CFLAGS="-O3 -march=native"
on the Ubuntu 13 and now it is better, but about half the cores are getting 20kH, while the rest are ~300kH

The one with link errors was user error, works fine now, so 3 servers, but more like 2.5 are going with 24 cores each
What is the estimated time to find a block?

James

[1715379173]

1715379173

[1715379173]

1715379173

[1715379173]

1715379173

[1715379173]

1715379173

[btc-mike]

Don't be nervous man.

Follow build instructions here (README.md file):
https://github.com/cryptozoidberg/cpuminer-multi

Thanks dude, I'm ready! Just to make sure, I follow the instructions under "Basic Windows build instructions, using MinGW:", correct?

Also, I want to use my computer while I mine (Win 7 x64). Is this possible under these instructions?

Yes. Go for it.

 ...
What is the estimated time to find a block?

James

A long time with current hash. We need more power to test the pool and verify it can find a block at high difficulties.

I am using a DO 8-CPU droplet and getting ~450KH/s.

[coins_and_coins]

Please help me in following the "Basic Windows build instructions, using MinGW:" instructions,

I installed mingw-get-setup but when I open MinGW Installer everything says mingw32___. Did I install the 32 bit version instead of 64? Also, my MinGW folder does not have a folder called "include" or "includes" in it. Should I create the folder then create the mstcpip.h file using this? http://wine.sourcearchive.com/documentation/1.1.24/mstcpip_8h_source.html

[btc-mike]

Please help me in following the "Basic Windows build instructions, using MinGW:" instructions,

I installed mingw-get-setup but when I open MinGW Installer everything says mingw32___. Did I install the 32 bit version instead of 64? Also, my MinGW folder does not have a folder called "include" or "includes" in it. Should I create the folder then create the mstcpip.h file using this? http://wine.sourcearchive.com/documentation/1.1.24/mstcpip_8h_source.html

you may need mingw-w64

[jl777]

Is it possible to do 2 of 3 (or more) multisig with BBR?

James

[kingscrown]

decent coin, suport the dev(s)

[pttx]

I see some strong miner connected to pool [x.x.x.245], whoever did it - thank you!

any windows .exe version

Not yet. I had some troubles installing libcurl into mingw toolchain. Working on it now

I've had a lot of problem with tx not going through.  Now I am unable to send anything out of my wallet at all. Any ideas?

[bool currency::tx_memory_pool::add_tx(const currency::transaction &, const crypto::hash &, size_t, currency::tx_verification_context &, bool)]Transaction with id= <161aceb57859219ec00bb79d58e0987e46a0e187fee79683b4ba07b09bdef8ac> used already spent key images

[33zer0w0lf]

I see some strong miner connected to pool [x.x.x.245], whoever did it - thank you!

any windows .exe version

Not yet. I had some troubles installing libcurl into mingw toolchain. Working on it now

I've had a lot of problem with tx not going through.  Now I am unable to send anything out of my wallet at all. Any ideas?

[bool currency::tx_memory_pool::add_tx(const currency::transaction &, const crypto::hash &, size_t, currency::tx_verification_context &, bool)]Transaction with id= <161aceb57859219ec00bb79d58e0987e46a0e187fee79683b4ba07b09bdef8ac> used already spent key images

I have seen this problem with almost every CN coin.

[pttx]

I see some strong miner connected to pool [x.x.x.245], whoever did it - thank you!

any windows .exe version

Not yet. I had some troubles installing libcurl into mingw toolchain. Working on it now

I've had a lot of problem with tx not going through.  Now I am unable to send anything out of my wallet at all. Any ideas?

[bool currency::tx_memory_pool::add_tx(const currency::transaction &, const crypto::hash &, size_t, currency::tx_verification_context &, bool)]Transaction with id= <161aceb57859219ec00bb79d58e0987e46a0e187fee79683b4ba07b09bdef8ac> used already spent key images

I have seen this problem with almost every CN coin.

I know with monero its a few hours till the coin is released from the mempool.  No idea about bbr

[aikklond]

Is a GPU miner ready to be released?

[herecoming]

How about 85k BBR ready to be dumped at our heads? It's dangerous coin i think.

[teknohog]

Hello friends!

I would like to ask you to help me test new stratum miner that i was working on last days.
I've just commited last changes of cpuminer to this repo:

https://github.com/cryptozoidberg/cpuminer-multi

...

params -P and -D could be removed. You could also change address, but this is not important since i'm afraid you won't get paid from this test pool.

I thought it would be a good idea to change the address, so you can look up your shares. So far there's nothing from my machine... or is this part not implemented yet? Edited, works

[Lordoftherigs]

How about 85k BBR ready to be dumped at our heads? It's dangerous coin i think.

what are you talking about ? I was hoping to buy some more BBR so please enlighten me 

[coins_and_coins]

Please help me in following the "Basic Windows build instructions, using MinGW:" instructions,

I installed mingw-get-setup but when I open MinGW Installer everything says mingw32___. Did I install the 32 bit version instead of 64? Also, my MinGW folder does not have a folder called "include" or "includes" in it. Should I create the folder then create the mstcpip.h file using this? http://wine.sourcearchive.com/documentation/1.1.24/mstcpip_8h_source.html

you may need mingw-w64

The instructions are missing any link to the x64 version. I believe I found the 64-bit file here http://sourceforge.net/projects/mingw-w64/files/, but it's making me chose between a bunch of options seen here: http://imgur.com/646cJ7O

[hornyPo]

Hello friends!

I would like to ask you to help me test new stratum miner that i was working on last days.
I've just commited last changes of cpuminer to this repo:

https://github.com/cryptozoidberg/cpuminer-multi

Here is pool repo:
https://github.com/cryptozoidberg/node-boolberry-pool


I've started test server here:
http://162.243.210.156/

This server is started only in test purposes. Once we find the block i'll turn it off and ask pool operators to update their pools.


To start mining, pull soureces from miner repo, rebuild miner, and run it with this command:

Code:

./minerd -a wildkeccak -o stratum+tcp://162.243.210.156:7777 -u 1L1ZPC9XodC6g5BX8j8m3vcdkXPiZrVF7RcERWE879coQDWiztUbkkVZ86o43P27Udb3qxL4B41gbaGpvj3nS7DgFZauAZE  -p x -P -D -t 4

params -P and -D could be removed. You could also change address, but this is not important since i'm afraid you won't get paid from this test pool.

Important: this miner is not compatible with other coins pools/miners, and it should work at this moment ONLY in stratum mode.

Known bugs:
* {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Low difficulty share"}} - in miner. "Bad hash from miner..." - on pool server (hashes missmatched). I talked with some of pool operstors and it seems that this is old bug from lucasjone's code.


So, to prove that this miner and pool is working we have to find at least one block.


PS: For me, cpuminer have nightmare code! May be it's because i'm in love with C++ and writing code in C is almost painful for me. But, i've tryied hard to keep this cpuminer-like code style in my commits there.

For this i get this error output . Don´t know if this related with slow connection.

Code:

./minerd -a wildkeccak -o stratum+tcp://162.243.210.156:7777 -u 1L1ZPC9XodC6g5BX8j8m3vcdkXPiZrVF7RcERWE879coQDWiztUbkkVZ86o43P27Udb3qxL4B41gbaGpvj3nS7DgFZauAZE  -p x -P -D -t 8
parsing algo: wildkeccak
[2014-07-03 15:28:01] Using JSON-RPC 2.0
[2014-07-03 15:28:01] Starting Stratum on stratum+tcp://162.243.210.156:7777
[2014-07-03 15:28:01] Binding thread 4 to cpu 4
[2014-07-03 15:28:01] Binding thread 3 to cpu 3
[2014-07-03 15:28:01] Binding thread 2 to cpu 2
* Rebuilt URL to: http://162.243.210.156:7777/
[2014-07-03 15:28:01] Binding thread 5 to cpu 5
* About to connect() to 162.243.210.156 port 7777 (#0)
[2014-07-03 15:28:01] 8 miner threads started, using 'wildkeccak' algorithm.
*   Trying 162.243.210.156...
* TCP_NODELAY set
[2014-07-03 15:28:01] Binding thread 1 to cpu 1
* Adding handle: conn: 0x7f8a00013530
* Adding handle: send: 0
* Adding handle: recv: 0
* Curl_addHandleToPipeline: length: 1
[2014-07-03 15:28:01] Binding thread 0 to cpu 0
* - Conn 0 (0x7f8a00013530) send_pipe: 1, recv_pipe: 0
[2014-07-03 15:28:01] Binding thread 7 to cpu 7
[2014-07-03 15:28:01] Binding thread 6 to cpu 6
* Connected to 162.243.210.156 (162.243.210.156) port 7777 (#0)
* Connection #0 to host 162.243.210.156 left intact
[2014-07-03 15:28:01] > {"method": "login", "params": {"login": "1L1ZPC9XodC6g5BX8j8m3vcdkXPiZrVF7RcERWE879coQDWiztUbkkVZ86o43P27Udb3qxL4B41gbaGpvj3nS7DgFZauAZE", "pass": "x", "hi": { "height": 0, "block_id": "0000000000000000000000000000000000000000000000000000000000000000" }, "agent": "cpuminer-multi/0.1"}, "id": 1}
[2014-07-03 15:28:01] < {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"321737723262049","job":{"blob":"","job_id":"","target":"","difficulty":"","prev_hi":{"block_id":"0000000000000000000000000000000000000000000000000000000000000000","height":0}},"status":"OK","addms":[]}}
[2014-07-03 15:28:01] Auth id: 321737723262049
[2014-07-03 15:28:01] Requested work before work was received
[2014-07-03 15:28:01] Getting full scratchpad....
[2014-07-03 15:28:01] > {"method": "getfullscratchpad", "params": {"id": "321737723262049", "agent": "cpuminer-multi/0.1"}, "id": 1}
[2014-07-03 15:29:01] < {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK","hi":{"block_id":"2e051a359c0a53ba673a2d2f5f9119044b9257976a441e0694437857ebf5c580","height":33210},"scratchpad_hex":"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...
[2014-07-03 15:29:01] JSON decode failed(1): premature end of input
[2014-07-03 15:29:01] Getting full scratchpad received line
[2014-07-03 15:29:01] JSON decode rpc2_getscratchpad response failed(1): premature end of input
[2014-07-03 15:29:01] > {"method": "getjob", "params": {"id": "321737723262049", "hi": { "height": 0, "block_id": "0000000000000000000000000000000000000000000000000000000000000000" }, "agent": "cpuminer-multi/0.1"}, "id": 1}
[2014-07-03 15:30:01] < 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...
[2014-07-03 15:30:01] JSON getwork decode failed(1): '[' or '{' expected near '778'
[2014-07-03 15:30:01] ...retry after 10 seconds
[2014-07-03 15:30:11] Stratum connection timed out
[2014-07-03 15:30:11] Stratum connection interrupted
* Rebuilt URL to: http://162.243.210.156:7777/
* About to connect() to 162.243.210.156 port 7777 (#1)
*   Trying 162.243.210.156...
* TCP_NODELAY set
* Adding handle: conn: 0x7f8a00012f10
* Adding handle: send: 0
* Adding handle: recv: 0
* Curl_addHandleToPipeline: length: 1
* - Conn 1 (0x7f8a00012f10) send_pipe: 1, recv_pipe: 0
* Connected to 162.243.210.156 (162.243.210.156) port 7777 (#1)
* Connection #1 to host 162.243.210.156 left intact
[2014-07-03 15:30:11] > {"method": "login", "params": {"login": "1L1ZPC9XodC6g5BX8j8m3vcdkXPiZrVF7RcERWE879coQDWiztUbkkVZ86o43P27Udb3qxL4B41gbaGpvj3nS7DgFZauAZE", "pass": "x", "hi": { "height": 0, "block_id": "0000000000000000000000000000000000000000000000000000000000000000" }, "agent": "cpuminer-multi/0.1"}, "id": 1}
[2014-07-03 15:30:11] < {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"400770579511299","job":{"blob":"","job_id":"","target":"","difficulty":"","prev_hi":{"block_id":"0000000000000000000000000000000000000000000000000000000000000000","height":0}},"status":"OK","addms":[]}}
[2014-07-03 15:30:11] Auth id: 400770579511299
[2014-07-03 15:30:11] Requested work before work was received
[2014-07-03 15:30:11] Getting full scratchpad....
[2014-07-03 15:30:11] > {"method": "getfullscratchpad", "params": {"id": "400770579511299", "agent": "cpuminer-multi/0.1"}, "id": 1}
[2014-07-03 15:31:11] < {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK","hi":{"block_id":"2e051a359c0a53ba673a2d2f5f9119044b9257976a441e0694437857ebf5c580","height":33210},"scratchpad_hex":"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...
[2014-07-03 15:31:11] JSON decode failed(1): premature end of input
[2014-07-03 15:31:11] Getting full scratchpad received line
[2014-07-03 15:31:11] JSON decode rpc2_getscratchpad response failed(1): premature end of input
[2014-07-03 15:31:11] > {"method": "getjob", "params": {"id": "400770579511299", "hi": { "height": 0, "block_id": "0000000000000000000000000000000000000000000000000000000000000000" }, "agent": "cpuminer-multi/0.1"}, "id": 1}
[2014-07-03 15:32:11] < 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...
[2014-07-03 15:32:11] JSON getwork decode failed(1): '[' or '{' expected near 'f'
[2014-07-03 15:32:11] ...retry after 10 seconds
[2014-07-03 15:32:21] Stratum connection timed out
[2014-07-03 15:32:21] Stratum connection interrupted
* Rebuilt URL to: http://162.243.210.156:7777/
* About to connect() to 162.243.210.156 port 7777 (#2)
*   Trying 162.243.210.156...
* TCP_NODELAY set
* Adding handle: conn: 0x7f8a00012b50
* Adding handle: send: 0
* Adding handle: recv: 0
* Curl_addHandleToPipeline: length: 1
* - Conn 2 (0x7f8a00012b50) send_pipe: 1, recv_pipe: 0
* Connected to 162.243.210.156 (162.243.210.156) port 7777 (#2)
* Connection #2 to host 162.243.210.156 left intact
[2014-07-03 15:32:21] > {"method": "login", "params": {"login": "1L1ZPC9XodC6g5BX8j8m3vcdkXPiZrVF7RcERWE879coQDWiztUbkkVZ86o43P27Udb3qxL4B41gbaGpvj3nS7DgFZauAZE", "pass": "x", "hi": { "height": 0, "block_id": "0000000000000000000000000000000000000000000000000000000000000000" }, "agent": "cpuminer-multi/0.1"}, "id": 1}
[2014-07-03 15:32:21] < {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"926133013982325","job":{"blob":"","job_id":"","target":"","difficulty":"","prev_hi":{"block_id":"0000000000000000000000000000000000000000000000000000000000000000","height":0}},"status":"OK","addms":[]}}
[2014-07-03 15:32:21] Auth id: 926133013982325
[2014-07-03 15:32:21] Requested work before work was received
[2014-07-03 15:32:21] Getting full scratchpad....
[2014-07-03 15:32:21] > {"method": "getfullscratchpad", "params": {"id": "926133013982325", "agent": "cpuminer-multi/0.1"}, "id": 1}
[2014-07-03 15:33:21] < {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK","hi":{"block_id":"2e051a359c0a53ba673a2d2f5f9119044b9257976a441e0694437857ebf5c580","height":33210},"scratchpad_hex":"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...
[2014-07-03 15:33:21] JSON decode failed(1): premature end of input
[2014-07-03 15:33:21] Getting full scratchpad received line
[2014-07-03 15:33:21] JSON decode rpc2_getscratchpad response failed(1): premature end of input
[2014-07-03 15:33:21] > {"method": "getjob", "params": {"id": "926133013982325", "hi": { "height": 0, "block_id": "0000000000000000000000000000000000000000000000000000000000000000" }, "agent": "cpuminer-multi/0.1"}, "id": 1}
[2014-07-03 15:34:21] < 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...
[2014-07-03 15:34:21] JSON getwork decode failed(1): '[' or '{' expected near 'c'
[2014-07-03 15:34:21] ...retry after 10 seconds
[2014-07-03 15:34:31] Stratum connection timed out
[2014-07-03 15:34:31] Stratum connection interrupted
* Rebuilt URL to: http://162.243.210.156:7777/
* About to connect() to 162.243.210.156 port 7777 (#3)
*   Trying 162.243.210.156...
* TCP_NODELAY set
* Adding handle: conn: 0x7f8a00012b50
* Adding handle: send: 0
* Adding handle: recv: 0
* Curl_addHandleToPipeline: length: 1
* - Conn 3 (0x7f8a00012b50) send_pipe: 1, recv_pipe: 0
* Connected to 162.243.210.156 (162.243.210.156) port 7777 (#3)
* Connection #3 to host 162.243.210.156 left intact
[2014-07-03 15:34:31] > {"method": "login", "params": {"login": "1L1ZPC9XodC6g5BX8j8m3vcdkXPiZrVF7RcERWE879coQDWiztUbkkVZ86o43P27Udb3qxL4B41gbaGpvj3nS7DgFZauAZE", "pass": "x", "hi": { "height": 0, "block_id": "0000000000000000000000000000000000000000000000000000000000000000" }, "agent": "cpuminer-multi/0.1"}, "id": 1}
[2014-07-03 15:34:31] < {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"731819144729524","job":{"blob":"","job_id":"","target":"","difficulty":"","prev_hi":{"block_id":"0000000000000000000000000000000000000000000000000000000000000000","height":0}},"status":"OK","addms":[]}}
[2014-07-03 15:34:31] Auth id: 731819144729524
[2014-07-03 15:34:31] Requested work before work was received
[2014-07-03 15:34:31] Getting full scratchpad....
[2014-07-03 15:34:31] > {"method": "getfullscratchpad", "params": {"id": "731819144729524", "agent": "cpuminer-multi/0.1"}, "id": 1}

[teknohog]

I'm getting a similar error with

Code:

JSON decode rpc2_getscratchpad response failed(1): premature end of input

The weird thing is that this only happens on one of two machines, which are not fundamentally very different. Both are behind the same NAT, although this one is behind an extra switch. The other machine is doing fine, finding shares all the time.

[hitbtc]

Hi! We are the Hitbtc team. Hitbtc is the most advanced exchange. Now everyone can vote for their favorite currency to be added to Hitbtc. You can start voting here: https://hitbtc.com/vote

Among the latest currencies taking part in our vote is Boolberry. So we invite all of you to take part in voting to add it to Hitbtc.
Votes from registered users will be multiplied x10!

[drawingthesun]

Hi! We are the Hitbtc team. Hitbtc is the most advanced exchange. Now everyone can vote for their favorite currency to be added to Hitbtc. You can start voting here: https://hitbtc.com/vote

Among the latest currencies taking part in our vote is Boolberry. So we invite all of you to take part in voting to add it to Hitbtc.
Votes from registered users will be multiplied x10!

Can you allow people to see the trading platform without signing in please?

[btc-mike]

I'm getting a similar error with

Code:

JSON decode rpc2_getscratchpad response failed(1): premature end of input

The weird thing is that this only happens on one of two machines, which are not fundamentally very different. Both are behind the same NAT, although this one is behind an extra switch. The other machine is doing fine, finding shares all the time.

The code needs a little tweaking. We noticed that error late last night during testing.

[btc-mike]

Here are the commands I used to compile on Ubuntu 14. Please run on the test server for a little while and report back any errors. It will help us a lot.

Code:

sudo apt-get install libcurl4-openssl-dev libncurses5-dev pkg-config automake yasm git
git clone https://github.com/cryptozoidberg/cpuminer-multi
cd cpuminer-multi
./autogen.sh
./configure CFLAGS="-O3"
make

If you have problems, try without CFLAGS