[ANN] ¤ DMD Diamond 3.0 | Scarce ¤ Valuable ¤ Secure | PoS 3.0 | Masternodes 65%

[cryptonit]

http://dmdeu.miningfield.com/ is up again

i tested and first block found successfully

as far as i can see it seems whole database got reset so u have to register again

and also it seems the mining port did change

would decrease risc of danbi pool forking if lot europe miner switch over to miningfield and usa miners use donkeypool

i know daniel works on other stuff too to prevent big hashrate pools create a risc of forking

but better save then sorry no need to test one pool longterm above 51% hashrate

a big thx towards luis from miningfield who even if at very low spare time get at least one of his dmd pools back up to support DMD

[Galactus]

developers

how, when and how many time it is necessary to apply the setchangeaddress parameter when I am withdrawal from a wallet?
I don't know how it works.

[cryptonit]

developers

how, when and how many time it is necessary to apply the setchangeaddress parameter when I am withdrawal from a wallet?
I don't know how it works.

if u dont set a changeaddress ur wallet will create a new address for everytime a transaction create a change returned to u
the change addresses only visible in coin control

when u add it to diamond.conf
changeaddress=youraddress
its always active if u use there ur mainadress u will get the change always back there

if u want to use it only for actual session u can set it at wallet gui

[cryptonit]

miners listen up please!

we need danbi pool below 20% of new blocks
(this would be around 40% of POW blocks)

please who mine at danbi switch to http://dmdeu.miningfield.com/
who mine at danbi and is from USA switch to http://dmd.donkeypool.com:808/

thx for ur support to create a more healthy mining hashrate distribution



solominers ignore this u are the true heroes regarding decentralized mining!
stay solomining  

[Reggie0]

miners listen up please!

we need danbi pool below 20% of new blocks
(this would be around 40% of POW blocks)

please who mine at danbi switch to http://dmdeu.miningfield.com/
who mine at danbi and is from USA switch to http://dmd.donkeypool.com:808/

thx for ur support to create a more healthy mining hashrate distribution



solominers ignore this u are the true heroes regarding decentralized mining!
stay solomining  

Great. It seems my hashrate in last 1000 blocks is 7.5%, and 8% in last 100 blocks  

[cryptonit]

miners listen up please!

we need danbi pool below 20% of new blocks
(this would be around 40% of POW blocks)

please who mine at danbi switch to http://dmdeu.miningfield.com/
who mine at danbi and is from USA switch to http://dmd.donkeypool.com:808/

thx for ur support to create a more healthy mining hashrate distribution



solominers ignore this u are the true heroes regarding decentralized mining!
stay solomining  

Great. It seems my hashrate in last 1000 blocks is 7.5%, and 8% in last 100 blocks  

u can get flagged like a pool just send a PM to fairglu with ur mining address

[cryptonit]

hmmm seems people get  "token expired" when try to register at
http://dmdeu.miningfield.com/

luis is sleeping already he will look at it tomorrow

[PANDiNSKi]

I'm having an issue with my wallet, It's refusing to properly sync. I turned on my machine today (Ive not changed any settings) and my wallet seemed to get stuck in a sync loop. I deleted the blockchain and freshly copied over the chain listed on the ANN page (Danbi's chain) and it then said I only had half the coins I actually own!

So I've now replaced my wallet with a backup and it's still trying to sync but not showing a lot of my transactions? My address is: dDuyYPmvYMSF9R3aU9VhCjxnLJNScbRMQk

*Edit* FYI I'm also using your suggested .conf Cryptonit

a few post earlier there is a chain from today

use that once sync finished use in console repairwallet

then u should be up to date

i am sorry for all the extra work this forking issue created

but i guess everyone can see we as core team have most of the work

and there is still no danger as happened on lot other coins

that we say fuck this and we leave the coin alone dying

that i can guarantee will never happen

also please understand we not have constant new forks

since last fork of danbi pool no new fork happend

BUT there still wallets who did stay on this fork and feed bad blocks

by use the chain i uploaded today u have no danger to get feeded bad block and accept them

this is a clean chain from 25.04
https://mega.co.nz/#!IQwRjCwS!jfAqWzbBXZy-5oRsgl0LeFrmMMJRgpBXrU6SZVuGHLU

All sorted, thanks for your help buddy

[Reggie0]

u can get flagged like a pool just send a PM to fairglu with ur mining address

Thanks, but I like the anonymity.

[cryptonit]

u can get flagged like a pool just send a PM to fairglu with ur mining address

Thanks, but I like the anonymity.

but really after 573 days u should start to POS with ur main wallet
would be nice 30k DMD minting rewards 

[Galactus]

developers

how, when and how many time it is necessary to apply the setchangeaddress parameter when I am withdrawal from a wallet?
I don't know how it works.

if u dont set a changeaddress ur wallet will create a new address for everytime a transaction create a change returned to u
the change addresses only visible in coin control

when u add it to diamond.conf
changeaddress=youraddress
its always active if u use there ur mainadress u will get the change always back there

if u want to use it only for actual session u can set it at wallet gui

This parameter is needed, that not to increase quantity of the hidden addresses and not to increase the "weight" of the wallet?
if so, then why this feature is not enabled by default?

[stillontop]

I am having my DMD wallet open and POS is working fine for me, it's just a little strange that the minting amounts are smaller now but more often, in the past it was less often but the amounts were bigger. The result will hopefully be the same

I have switched my POW hashrate to a different coin with the same algo, groestlcoin, they are around 500 Mh/s and can use some support I guess.

I think it wouldn't be bad to have a second coin based on this algorithm for daily transactions and use diamond as long term wealth storage.

[cryptonit]

This parameter is needed, that not to increase quantity of the hidden addresses and not to increase the "weight" of the wallet?
if so, then why this feature is not enabled by default?

because we did take that part unchanged from our bitcoin anchestor

same as all coins who build up on bitcoin code base

but if demand is bog enought we can think about it

that we added the changeaddress= option for diamond.conf seems to me a acceptable solution

because how we know automated what addres people wana use as change address

the risc that no changeaddress setting make wallet heave only exist after a lot years for a normal useage

in that timeframe we can expect code changes that will take care about long term optimization of wallets

so short answer:

yes all kind of stuff to wallet dust optimisations this is on todo list but at low priority because for 99% of users feelable effects are multiple years away

[miningfield]

hmmm seems people get  "token expired" when try to register at
http://dmdeu.miningfield.com/

luis is sleeping already he will look at it tomorrow

If you're having a "token expired" error while registering, empty your browser cache, restart browser and try again.

Also don't take too long to enter all the information

[Galactus]

cryptonit

I am interested in more safety of the file a wallet.dat, therefore I am interested parameter changeaddress=
example, hypothetical situation:
I posted a few coins in the outgoing transaction.
at this time the wallet creates additional hidden addresses...
and at this time for any reasons there is a failure of an operating system, turned off electricity and other.
under such circumstances the wallet can not manage to create the necessary hidden addresses and the file wallet.dat, will be damaged.
this leads to the loss of coins that have appeared in the wallet after the last backup file wallet.dat.
as example: was 1000 coins (I have a backup wallet.dat 1000 coins). I got 100 coins and sent 50. total wallet should remain in 1050 coins.
system crash (for any reason). wallet.dat damaged.
as a result I have only 1000 coins (backup wallet.dat 1000 coins), but not 1050.
you understand that I want to tell?
Even if such a situation may occur once every 10 years, this could lead to loss of all the coins. I understand that there is still a lot of other options damage wallet.dat, but I'm talking about a parameter changeaddress=  in diamond.conf.
If do not create hidden addresses the probability of damage is much lower.
Correct me if I'm wrong.

If I have 3 addresses in wallet the fact that in this case I need to write in diamond.conf?

[cryptonit]

cryptonit

I am interested in more safety of the file a wallet.dat, therefore I am interested parameter changeaddress=
example, hypothetical situation:
I posted a few coins in the outgoing transaction.
at this time the wallet creates additional hidden addresses...
and at this time for any reasons there is a failure of an operating system, turned off electricity and other.
under such circumstances the wallet can not manage to create the necessary hidden addresses and the file wallet.dat, will be damaged.
this leads to the loss of coins that have appeared in the wallet after the last backup file wallet.dat.
as example: was 1000 coins (I have a backup wallet.dat 1000 coins). I got 100 coins and sent 50. total wallet should remain in 1050 coins.
system crash (for any reason). wallet.dat damaged.
as a result I have only 1000 coins (backup wallet.dat 1000 coins), but not 1050.
you understand that I want to tell?
Even if such a situation may occur once every 10 years, this could lead to loss of all the coins. I understand that there is still a lot of other options damage wallet.dat, but I'm talking about a parameter changeaddress=  in diamond.conf.
If do not create hidden addresses the probability of damage is much lower.
Correct me if I'm wrong.

If I have 3 addresses in wallet the fact that in this case I need to write in diamond.conf?

the parameter changeaddress=

is allready implemented in code u can add it to ur diamond.conf

just write the address where u want u change to be send

also ur szenario is very unlikely (or even impossible)  to be able use a change address the change address must be created
when its created its stored in wallet.dat only when its existing the transactions which use it for change can be made

so when if u say ur computer crashed before the change address is stored then no transaction happened that use this address.... and nothing lost

[cryptonit]

hmmm seems people get  "token expired" when try to register at
http://dmdeu.miningfield.com/

luis is sleeping already he will look at it tomorrow

If you're having a "token expired" error while registering, empty your browser cache, restart browser and try again.

Also don't take too long to enter all the information

no matter how fast i try it always bring token expired even after delete all cache stuff and restart browser....

there must be a issue

[RaginglikeaBoss]

The massive sell wall on cryptsy is now gone I wonder whom that could've been.  Back into the rich list.

[cryptonit]

The massive sell wall on cryptsy is now gone I wonder whom that could've been.  Back into the rich list.

lets say im pretty impressed how stable price is after all that troubles we had

that make me very optimistic for the future when issues solved
and stability is again a word u can connect with dmd network

[cryptonit]

great job guys!
even with miningfield pool have startup troubles with register accounts
u managed to spread hashrate so no pool is above 40% of POW (20% of new blocks)
keep up the good work balancing hashrate between pools

also we can see POS works like a clockwork exact 50% of blocks