[Minera v0.9.1] Your next mining dashboard - Antminer/CPUminer/CGminer/BFGminer

[gigica viteazu`]

The Wallet and Proxy can be the same machine, so:

Minera (BFGminer) > Server (BFGMiner + Wallet)

yes, my diagram was more about the connection logic , anyway my BFGminer doesn`t wanna start:

Code:

./bfgminer: error while loading shared libraries: libblkmaker_jansson-0.1.so.0: cannot open shared object file: No such file or directory

any idea ?

[1714772776]

1714772776

[1714772776]

1714772776

[madmartyk]

Anyone out there using BFGMiner with Gridseed blades?  What is the command like that should be entered in options to get the correct speed?

Thanks!!

[nwoolls]

Code:

./bfgminer: error while loading shared libraries: libblkmaker_jansson-0.1.so.0: cannot open shared object file: No such file or directory

any idea ?

Maybe try:

Code:

sudo ldconfig

[nwoolls]

Anyone out there using BFGMiner with Gridseed blades?  What is the command like that should be entered in options to get the correct speed?

Thanks!!

Try:

Code:

--set gsd:clock=840

[michelem]

The Wallet and Proxy can be the same machine, so:

Minera (BFGminer) > Server (BFGMiner + Wallet)

yes, my diagram was more about the connection logic , anyway my BFGminer doesn`t wanna start:

Code:

./bfgminer: error while loading shared libraries: libblkmaker_jansson-0.1.so.0: cannot open shared object file: No such file or directory

any idea ?

Is it a Minera install from image file or a manual install?

[madmartyk]

Anyone out there using BFGMiner with Gridseed blades?  What is the command like that should be entered in options to get the correct speed?

Thanks!!

Try:

Code:

--set gsd:clock=840

Nope, same thing, lots of HW errors and the speed shoots up the 2.8 Mh per blade.

[nwoolls]

Anyone out there using BFGMiner with Gridseed blades?  What is the command like that should be entered in options to get the correct speed?

Thanks!!

Try:

Code:

--set gsd:clock=840

Nope, same thing, lots of HW errors and the speed shoots up the 2.8 Mh per blade.

2.8 Mh/s is the correct speed per blade. Maybe you are not providing enough power to them?

840 is what I use but you can try adjusting it down if it is too high for your hardware.

[Flep182]

Is there a solution already for the bumping down the poollist which ends up on the donationpool?

Because I want to donate something, but would be ok with giving 15 minutes a day but not keeping it as last pool in the list as it will get much higher than 15 minutes a day then

[madmartyk]

Anyone out there using BFGMiner with Gridseed blades?  What is the command like that should be entered in options to get the correct speed?

Thanks!!

Try:

Code:

--set gsd:clock=840

Nope, same thing, lots of HW errors and the speed shoots up the 2.8 Mh per blade.

2.8 Mh/s is the correct speed per blade. Maybe you are not providing enough power to them?

840 is what I use but you can try adjusting it down if it is too high for your hardware.

I'll give it a try again when I get home.  I usually run at 838 and with CPUMiner I get very few errors.  BFGMiner has no issues with the pool I use where CPUMiner has to be started and stopped a few times before it starts accepting.

[michelem]

Is there a solution already for the bumping down the poollist which ends up on the donationpool?

Because I want to donate something, but would be ok with giving 15 minutes a day but not keeping it as last pool in the list as it will get much higher than 15 minutes a day then

What do you mean? Is it randomly jumping into donation pool? Otherwise, just keep 3/4 different pools of yours and you should be fine.

[Axiste]

I have 4 pools + Donation pool, and i have donate set to 30 mins a day, it only mines on the donate pool for 30 mins, or if my other 4 pools are down (so far i have never had more than 1 down at a time..)

[gigica viteazu`]

Is it a Minera install from image file or a manual install?

manual install... but nwoolls answer fixed the problem thank you nate

[madmartyk]

With CPUMiner what causes this when you try to connect to a pool?
[2014-08-26 17:34:40] stratum_recv_line failed
[2014-08-26 17:34:40] ...retry after 5 seconds
[2014-08-26 17:34:46] stratum_recv_line failed
[2014-08-26 17:34:46] ...retry after 5 seconds
[2014-08-26 17:34:51] stratum_recv_line failed


I can restart the miner a few times and usually get it to accept shares, but it's a real pain...

[marty1972]

Hi there,

I noticed that Minera 0.3.5 has a little bug. It is what I renamed the "pool jumping" bug. I configured 4 pools and suddenly it started to "jump" on the second, the third and then back to first one, even if the first pool (with 0 priority) was alive. That's quite peculiar, isn't it?

Cheers,
Marty

[Axiste]

michelem is going to need more info than that.. what miner? etc etc.

I have 4 pools plus the donation pool, and minera only swaps to the donation pool for the 30 mins I have set, and only switches to a lower priority pool when the first is down... hasnt ever done what you have described.

[pjcltd]

Hi guys I'm useing this system on all my miners and one thing
I would like is the ability to name a pool
I run my own pool server and all the stratus  lines are the same apart from the port no.

I just think it would be nice to have it.

Thanks and keep up the very good work.

[Giopi]

Work with antminer s3?

[michelem]

@marty1972 we need more info, what miner do you use? did you try another one? Can you see what the miner log says when this happens?

@pjcltd that should be easy

@giopi if latest bfgminer/cgminer works with Anminer S3, Minera will work too.

[Flep182]

Is there a solution already for the bumping down the poollist which ends up on the donationpool?

Because I want to donate something, but would be ok with giving 15 minutes a day but not keeping it as last pool in the list as it will get much higher than 15 minutes a day then

What do you mean? Is it randomly jumping into donation pool? Otherwise, just keep 3/4 different pools of yours and you should be fine.

I have NiceHash, CM, Ghash and Multipool setup. And had the donationpool under it. I don't think it will happen often that Nicehash, CM, Ghash and multipool are down but that the ghashmultipool is up

It's been reported before and I haven't seen a "fixed" notice but I could've missed that

Have tried it a week ago again and when I got home one of my RPi's was running donationpool for more than the 15 minutes I had put in

[michelem]

I have NiceHash, CM, Ghash and Multipool setup. And had the donationpool under it. I don't think it will happen often that Nicehash, CM, Ghash and multipool are down but that the ghashmultipool is up

It's been reported before and I haven't seen a "fixed" notice but I could've missed that

Have tried it a week ago again and when I got home one of my RPi's was running donationpool for more than the 15 minutes I had put in

Let me understand, if you go to settings page -> donation pool -> View your past donations: can you see the right donations or they have unexpected time periods?

Another question, what miner do you use? And, can you see what the miner log says when a jumping pool happens?

Thanks!