[ANN][MAST] MastCoin | CoinRecycler | Bittrex

[vir6]

Also Poloniex  still has not changed the name.

Poloniex has been notified many times, in the support, trollbox, IRC...

On coinmarketcap.com the logo has changed but still directing to the old site .Anyone new to this coin and clicking the name will not have a clue about the new features etc .Think it is very important to have redirection to the new site otherwise it just adds to general confusion, And I for one want as many people as possible to know what mast is all about.

Coinmarketcap has also been contacted many times about the change.

[Luvmast]

Also Poloniex  still has not changed the name.

Poloniex has been notified many times, in the support, trollbox, IRC...

On coinmarketcap.com the logo has changed but still directing to the old site .Anyone new to this coin and clicking the name will not have a clue about the new features etc .Think it is very important to have redirection to the new site otherwise it just adds to general confusion, And I for one want as many people as possible to know what mast is all about.

Coinmarketcap has also been contacted many times about the change.

Yes i have contacted them myself to point it out but to no avail .I thought it could be done from the devs end with a redirection for all traffic from mastiffcoin to mastcoin , Maybe I'm wrong .

[seattletu]

someone dumped 23k coins today, bummer for them

[TheICE007]

yea, i got a feeling this is going to be one of those coins that goes up all of a sudden, and people will be scratching there heads wondering how they missed it.

[seattletu]

yea, i got a feeling this is going to be one of those coins that goes up all of a sudden, and people will be scratching there heads wondering how they missed it.

it's going under the radar because of the name. once it gets traction it's gonna be huge

[Collegestudent]

Wallet doesnt sync can i have a .conf file?

[lotosminer]

Wallet doesnt sync can i have a .conf file?

same problem here, no active connections...

[AltxF4]

I synced just fine, 16 active connections. Just run the qt without doing anything else.


Yes this coin is very much under the radar. Mentioned this coin to a person who is in cryptos on a different type of forum. He has a lot of Doge to recycle...hope he does it.

[vir6]

I don't know why you can't sync guys, my wallet is working perfectly and staking right now !

Some little changes on the website :

- New banner in "home"
- Updated link redirection to the CoinRecycler
- Added new windows wallet http://mastcoin.co/get-started
- Added new GITHUB Mastcoin

[MastiffCoin]

Wallet doesnt sync can i have a .conf file?

Could you have a firewall blocking it or something? The wallet should sync fine, there's no .conf file or addnodes needed.

You could try removing your peers.dat file to see if that helps.

[seattletu]

is everyone still voting on mintpal? we are all kind of hoping this coin explodes in popularity and volume and gets added to mintpal without a vote. but we should just keep at it anyway https://www.mintpal.com/voting#MAST

[etoque]

Hi dev

can you tell in percent  %  where you are on the wallet development ?

thanks !

[VegasMiner]

I too can confirm that I have tried to install the wallet on 2 different OS and the wallet won't sync. It cannot find any active connections. Tried on Win 8.1 Pro, and Win Server 2012 R2. Allowed the wallets through the firewall to no avail. I am not sure if the server thing will even work but it is just a project of mine. Any input or list of active connection to build a .conf file would be appreciated. I want to start staking again but I re-installed Windows on all of my machines so I have to set things up again.

[seattletu]

no problems with my wallet

[VegasMiner]

no problems with my wallet

Would you mind going into the console and doing a getpeerinfo ? I can then take the IP's and make a config possibly. Has anyone tried to install the wallet with a clean image and not just an install over the top of the old wallet install?

[AltxF4]

[
{
"addr" : "89.106.59.189:12151",
"services" : "00000001",
"lastsend" : 1403917182,
"lastrecv" : 1403917182,
"conntime" : 1403837914,
"version" : 60014,
"subver" : "/Satoshi:1.0.1/",
"inbound" : false,
"startingheight" : 89420,
"banscore" : 0
},
{
"addr" : "78.108.54.193:12151",
"services" : "00000001",
"lastsend" : 1403917182,
"lastrecv" : 1403917182,
"conntime" : 1403837960,
"version" : 60014,
"subver" : "/Satoshi:1.0.1/",
"inbound" : false,
"startingheight" : 89423,
"banscore" : 0
},
{
"addr" : "86.152.84.52:12151",
"services" : "00000001",
"lastsend" : 1403917182,
"lastrecv" : 1403917182,
"conntime" : 1403838584,
"version" : 60014,
"subver" : "/Satoshi:1.0.1/",
"inbound" : false,
"startingheight" : 89449,
"banscore" : 0
},
{
"addr" : "5.81.18.207:12151",
"services" : "00000001",
"lastsend" : 1403917182,
"lastrecv" : 1403917182,
"conntime" : 1403839309,
"version" : 60014,
"subver" : "/Satoshi:1.0.1/",
"inbound" : false,
"startingheight" : 89472,
"banscore" : 0
},
{
"addr" : "188.165.3.223:12151",
"services" : "00000001",
"lastsend" : 1403917182,
"lastrecv" : 1403917182,
"conntime" : 1403839728,
"version" : 60014,
"subver" : "/Satoshi:1.0.1/",
"inbound" : false,
"startingheight" : 89485,
"banscore" : 0
},
{
"addr" : "81.105.192.121:12151",
"services" : "00000001",
"lastsend" : 1403917182,
"lastrecv" : 1403917039,
"conntime" : 1403840144,
"version" : 60014,
"subver" : "/Satoshi:1.0.1/",
"inbound" : false,
"startingheight" : 89498,
"banscore" : 0
},
{
"addr" : "216.108.167.85:12151",
"services" : "00000001",
"lastsend" : 1403917181,
"lastrecv" : 1403917182,
"conntime" : 1403840783,
"version" : 60014,
"subver" : "/Satoshi:1.0.1/",
"inbound" : false,
"startingheight" : 89527,
"banscore" : 0
},
{
"addr" : "173.192.30.91:12151",
"services" : "00000001",
"lastsend" : 1403917182,
"lastrecv" : 1403917182,
"conntime" : 1403840978,
"version" : 60014,
"subver" : "/Satoshi:1.0.1/",
"inbound" : false,
"startingheight" : 89532,
"banscore" : 0
},
{
"addr" : "108.163.232.221:12151",
"services" : "00000001",
"lastsend" : 1403917182,
"lastrecv" : 1403917182,
"conntime" : 1403841509,
"version" : 60014,
"subver" : "/Satoshi:1.0.1/",
"inbound" : false,
"startingheight" : 89545,
"banscore" : 0
},
{
"addr" : "66.68.138.128:12151",
"services" : "00000001",
"lastsend" : 1403917182,
"lastrecv" : 1403917182,
"conntime" : 1403847580,
"version" : 60014,
"subver" : "/Satoshi:1.0.1/",
"inbound" : false,
"startingheight" : 89763,
"banscore" : 0
},
{
"addr" : "71.120.15.84:12151",
"services" : "00000001",
"lastsend" : 1403917182,
"lastrecv" : 1403917182,
"conntime" : 1403848030,
"version" : 60014,
"subver" : "/Satoshi:1.0.1/",
"inbound" : false,
"startingheight" : 89782,
"banscore" : 0
},
{
"addr" : "80.229.22.200:12151",
"services" : "00000001",
"lastsend" : 1403917183,
"lastrecv" : 1403917183,
"conntime" : 1403854979,
"version" : 60014,
"subver" : "/Satoshi:1.0.1/",
"inbound" : false,
"startingheight" : 90024,
"banscore" : 0
},
{
"addr" : "184.173.115.98:12151",
"services" : "00000001",
"lastsend" : 1403917182,
"lastrecv" : 1403917182,
"conntime" : 1403885837,
"version" : 60014,
"subver" : "/Satoshi:1.0.1/",
"inbound" : false,
"startingheight" : 91089,
"banscore" : 0
},
{
"addr" : "181.54.134.19:12151",
"services" : "00000001",
"lastsend" : 1403917182,
"lastrecv" : 1403917182,
"conntime" : 1403895591,
"version" : 60014,
"subver" : "/Satoshi:1.0.1/",
"inbound" : false,
"startingheight" : 91417,
"banscore" : 0
},
{
"addr" : "50.80.62.215:12151",
"services" : "00000001",
"lastsend" : 1403917182,
"lastrecv" : 1403917182,
"conntime" : 1403897414,
"version" : 60014,
"subver" : "/Satoshi:1.1.0/",
"inbound" : false,
"startingheight" : 91475,
"banscore" : 0
},
{
"addr" : "174.45.80.214:12151",
"services" : "00000001",
"lastsend" : 1403917182,
"lastrecv" : 1403917182,
"conntime" : 1403901548,
"version" : 60014,
"subver" : "/Satoshi:1.1.0/",
"inbound" : false,
"startingheight" : 91607,
"banscore" : 0
}
]

[MastiffCoin]

no problems with my wallet

Would you mind going into the console and doing a getpeerinfo ? I can then take the IP's and make a config possibly. Has anyone tried to install the wallet with a clean image and not just an install over the top of the old wallet install?

There are three seed nodes, which are all currently functional, that are built into the wallet. It seems like something must be something blocking your connection to them? There's no version incompatibility between the last version that you must have been running (v1.0.1) and the latest rebranded MastCoin wallet (v1.1.0), so there shouldn't be any issue with multiple versions on the network, etc.

[mitchellmint]

no problems with my wallet

Would you mind going into the console and doing a getpeerinfo ? I can then take the IP's and make a config possibly. Has anyone tried to install the wallet with a clean image and not just an install over the top of the old wallet install?

There are three seed nodes, which are all currently functional, that are built into the wallet. It seems like something must be something blocking your connection to them? There's no version incompatibility between the last version that you must have been running (v1.0.1) and the latest rebranded MastCoin wallet (v1.1.0), so there shouldn't be any issue with multiple versions on the network, etc.

Im noticing Nodes Smurfing as well.  They are blocking new wallets from installing quickly.  Time to get out the Ban-hammer.

[VegasMiner]

no problems with my wallet

Would you mind going into the console and doing a getpeerinfo ? I can then take the IP's and make a config possibly. Has anyone tried to install the wallet with a clean image and not just an install over the top of the old wallet install?

There are three seed nodes, which are all currently functional, that are built into the wallet. It seems like something must be something blocking your connection to them? There's no version incompatibility between the last version that you must have been running (v1.0.1) and the latest rebranded MastCoin wallet (v1.1.0), so there shouldn't be any issue with multiple versions on the network, etc.

Well I'm running an Amazon EC2 instance which will not connect. The wallet has been allowed in the firewall. My Windows 8.1 machine is on a different IP and in no way affiliated with the EC2. Both will not connect, both have been allowed through firewall, and both have other coin wallets downloading and syncing as we speak. So it really seems as if there is something wrong. I am going to make a config now and see what happens. Would I name it Mast.conf or MastiffCoin.conf?

[MastiffCoin]

no problems with my wallet

Would you mind going into the console and doing a getpeerinfo ? I can then take the IP's and make a config possibly. Has anyone tried to install the wallet with a clean image and not just an install over the top of the old wallet install?

There are three seed nodes, which are all currently functional, that are built into the wallet. It seems like something must be something blocking your connection to them? There's no version incompatibility between the last version that you must have been running (v1.0.1) and the latest rebranded MastCoin wallet (v1.1.0), so there shouldn't be any issue with multiple versions on the network, etc.

Well I'm running an Amazon EC2 instance which will not connect. The wallet has been allowed in the firewall. My Windows 8.1 machine is on a different IP and in no way affiliated with the EC2. Both will not connect, both have been allowed through firewall, and both have other coin wallets downloading and syncing as we speak. So it really seems as if there is something wrong. I am going to make a config now and see what happens. Would I name it Mast.conf or MastiffCoin.conf?

Hmm, I see what you're saying now. I installed a new MastCoin wallet onto a fresh directory and it wouldn't sync.

** EDIT: I know what the problem is.. the search/replace for rebranding MastiffCoin to MastCoin in the wallet must have removed the nodes - we'll fix that up and release an updated version soon, sorry for the trouble.

I created a MastiffCoin.conf file with the following nodes, and it sync'd right up though:

addnode=node1.mastiffcoin.com
addnode=node2.mastiffcoin.com
addnode=node3.mastiffcoin.com

We'll investigate why those nodes aren't being sync'd from automatically, because they're the built in seednodes and should work just fine.

To answer your second question, yes the datadir and conf file are under the MastiffCoin name by default to preserve backwards compatibility with existing wallets. Use MastiffCoin.conf by default and a datadir of MastiffCoin to keep backwards compatibility, but you can specify your own datadir and conf filename using commandline options if needed.