[ANN][X11/X13] X11 (Darkcoin)/X13 (Marucoin) miner (based on sph-sgminer)

[ebliever]

No luck for me, with new Kernel and 14.6 still the same hashrate 3.4 Mh/s. any indeas?

Delete .bin files \ try to use my config\.bin

I dont get it. Can someone explain this?

You should have one or more files in your miner's directory with a .BIN extension. You should replace them with the binaries (.BIN) he provided.

Don't worry about deleting them, as the miner will recreate them if it can't find any when it first starts anyway.

[1714465114]

1714465114

[Kartaba]

Well i have a sapphire r9290x and i got the sgminer v5 (badman) .. Before i had the sgminer x11mod (or something) and have now 5,6 mhs in stead of 3,8mhs with X11 algo (and same wattage powerconsumption (around 300watts)

I tried different kinds of things ( mostly what i got from this forum... mostly the xintensity helped more than all other settings) and after alot of crashes and headache i managed to get stable 6,2-6,3 mhs out of it ... overclocked little (1050-1375) using 14,7 amd driver (14,9 sucks)... but then i looked at the power meter ... drawed almost 400 watts (Monitor not included because it is on other powermeter with my 2nd pc) before it was 310-320watt .... so i stick with 5,6 MH/s

My 2nd pc has 2x 750ti evga ftw and with those i hash 2600-2700 a piece which totals to around ..lets say 5,2MH/s ..power usage is 220-230WATT including monitor "on" if monitor is "off" the meter gives 180-190WATT..

I live in holland and electricity is rather expensive here 0.2346 euro per KW so i have to weigh the extra hash with the amount of consumed energy. Im cheap basically hehe

I wonder what the r9290x would pull on 8MHs+ hence i read here that people are able to tweak the miner to such performance?
For me.. because i pay my own bills hehe .. its not better, but perhaps im doing wrong.
Does someone here pull around 300watts energy with hashrates of 6MH/s or more using X11 algo and r9290x card?
Thank you in advance

[ebliever]

Well i have a sapphire r9290x and i got the sgminer v5 (badman) .. Before i had the sgminer x11mod (or something) and have now 5,6 mhs in stead of 3,8mhs with X11 algo (and same wattage powerconsumption (around 300watts)

I tried different kinds of things ( mostly what i got from this forum... mostly the xintensity helped more than all other settings) and after alot of crashes and headache i managed to get stable 6,2-6,3 mhs out of it ... overclocked little (1050-1375) using 14,7 amd driver (14,9 sucks)... but then i looked at the power meter ... drawed almost 400 watts (Monitor not included because it is on other powermeter with my 2nd pc) before it was 310-320watt .... so i stick with 5,6 MH/s

My 2nd pc has 2x 750ti evga ftw and with those i hash 2600-2700 a piece which totals to around ..lets say 5,2MH/s ..power usage is 220-230WATT including monitor "on" if monitor is "off" the meter gives 180-190WATT..

I live in holland and electricity is rather expensive here 0.2346 euro per KW so i have to weigh the extra hash with the amount of consumed energy. Im cheap basically hehe

I wonder what the r9290x would pull on 8MHs+ hence i read here that people are able to tweak the miner to such performance?
For me.. because i pay my own bills hehe .. its not better, but perhaps im doing wrong.
Does someone here pull around 300watts energy with hashrates of 6MH/s or more using X11 algo and r9290x card?
Thank you in advance

I pull just under 300 W/GPU with four 290X's (Sapphire BF4 edition), and average 23.9 Mhash on X11 across the 4 of them. I think Wolf0's the only one getting 8 Mhash, though I keep hoping someone figures out his secret and publishes it.

Your cost of electricity is almost double mine, and I'm just barely earning more than the cost of electricity. I hope you have some inside scoop on where to mine to keep yourself profitable. Otherwise just save yourself on the electric bill and use the fiat to buy crypto directly.

[pallas]

I pull just under 300 W/GPU with four 290X's (Sapphire BF4 edition), and average 23.9 Mhash on X11 across the 4 of them. I think Wolf0's the only one getting 8 Mhash, though I keep hoping someone figures out his secret and publishes it.

the "secret" is:
rewrite simd and groestl ;-)

[Kartaba]

WOW wolf ... lol i hate you hehe but ey i dont know anything about IT, coding or whatever so if you have talent like that then you deserve to have better performance. Or how you say in english... u deserve to have the edge  ..?
 
Yes mister "Ebliever" i cant keep up with the electric costs!! ..anymore.. I started around march-april because of dogecoin, darkcoin (doge mostly) and i was beginning to make little bit of cash (btc was around 450 euro so it was ok)...but when darkcoin got worthless i tried couple of coins like LOL,OPEC,Pawn, vert,einstein, and so on hehe. So far all my time in alts except for reddcoin was kinda waste.
I find all algo's (before x11) making too much noise and getting hardware too hot and too much power consumption.
Thats why i like x11 coins, i havent tried the x13..x15 etc new algo's but perhaps in future. But now btc is not even a stable 300 euro so im turning the pc's off now most of the time hehe.
I only mine coins in evening because i pay less for electricity, but i dont really have a good coin to mine atm.. i started cannabiscoin ... been running for couple of evenings now.. have around 200 coins .. but then i realized i had a bittrex account for trading those reddcoins in back in july-august ^^ and i just bought 500 of them on bittrex with some change..leftover bitcoin in my bitrexx account for less than 5 euro :S .. my rigs cost at least 3 euro a day.. and i mine max 100 of them at difficulty 250-ish so its waste of time to mine cann

I wish i could stop and sell the pc's but i just cant... i go all smeagol crazy every time i think about selling "my preciousss" pc's ... I knew i should bought that delorean!! in stead of gpu at least i could have had my 80's "back to the future GEEK on!"
Good luck all miners and thank you for your wattage numbers wolf0 and ebliever.

[SebaS-DG]

There is something wrong i think...

Im using w7 64 bits, ati drivers 14.9, ati hd5850

http://s28.postimg.org/isii32k2l/Sin_t_tulo.jpg

sgminer:

]
,

"kernel" : "x13modold",
"kernel-path" : "/usr/local/bin",
"vector" : "1",
"intensity" : "15",
"worksize" : "128",
"lookup-gap" : "2",
"gpu-threads" : "1",
"gpu-engine" : "725",
"gpu-memclock" : "1000",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"gpu-dyninterval" : "10",
"auto-fan" : true,
"auto-gpu" : true,
"gpu-fan" : "50-100",
"temp-cutoff" : "95",
"temp-overheat" : "90",
"temp-target" : "68",
"temp-hysteresis" : "3",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-network" : true,
"api-port" : "4028",
"failover-switch-delay" : "30",
"log" : "5",
"no-pool-disable" : true,
"no-submit-stale" : true,
"tcp-keepalive" : "30",
"worktime" : true,
"shares" : "0",
"queue" : "3",
"expiry" : "60",
"scan-time" : "60",
"show-coindiff" : true,
"gpu-platform" : "0",
"device" : "0"
}

[SebaS-DG]

There is something wrong i think...

Im using w7 64 bits, ati drivers 14.9, ati hd5850

http://s28.postimg.org/isii32k2l/Sin_t_tulo.jpg

sgminer:

]
,

"kernel" : "x13modold",
"kernel-path" : "/usr/local/bin",
"vector" : "1",
"intensity" : "15",
"worksize" : "128",
"lookup-gap" : "2",
"gpu-threads" : "1",
"gpu-engine" : "725",
"gpu-memclock" : "1000",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"gpu-dyninterval" : "10",
"auto-fan" : true,
"auto-gpu" : true,
"gpu-fan" : "50-100",
"temp-cutoff" : "95",
"temp-overheat" : "90",
"temp-target" : "68",
"temp-hysteresis" : "3",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-network" : true,
"api-port" : "4028",
"failover-switch-delay" : "30",
"log" : "5",
"no-pool-disable" : true,
"no-submit-stale" : true,
"tcp-keepalive" : "30",
"worktime" : true,
"shares" : "0",
"queue" : "3",
"expiry" : "60",
"scan-time" : "60",
"show-coindiff" : true,
"gpu-platform" : "0",
"device" : "0"
}

5850? I'm mildly surprised it mines at all.

Nvm... i think, i changed the pool and seems to work fine now.

[davzilla]

hey guys, i'm runing Linux BAMT 1.5.2 with the djm34-x11mod. I have one Sapphire R9 290X Tri-X Toxic non-OC (4gb) and three Sapphire R9 280X Tri-X Toxic OC's (3gb) in the same rig and i'm not sure why the 290X only does ~3500kh/s when the 280X's are running at 3325kh/s each.

djm34-x11mod.conf is as follows:

"kernel" : "x11mod",
"intensity" : "21",
"xintensity" : "0",
"rawintensity" : "0",
"gpu-threads" : "1,2,2,2",
"lookup-gap" : "0",
"thread-concurrency" : "30464,22336,22336,22336",
"shaders" : "2560,2048,2048,2048",
"gpu-engine" : "1000,1175,1175,1175",
"gpu-memclock" : "1500,1600,1600,1600",
"gpu-fan" : "0-75",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"auto-fan" : true,
"auto-gpu" : true,
"temp-target" : "70",
"temp-overheat" : "80",
"temp-cutoff" : "90",
"temp-hysteresis" : "3",
"no-submit-stale" : true,
"no-pool-disable" : true,
"failover-only" : true,
"failover-switch-delay" : "60",
"queue" : "1",
"scan-time" : "7",
"shares" : "0",
"tcp-keepalive" : "30",
"expiry" : "28",
"log" : "5",
"kernel-path" : "/usr/local/bin",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"api-allow" : "W:127.0.0.1"

any input would be great because i should be getting quite a bit more out of the 290X from what i've been reading/trying on here.

[logocreator]

There is something wrong i think...

Im using w7 64 bits, ati drivers 14.9, ati hd5850



sgminer:

]
,

"kernel" : "x13modold",
"kernel-path" : "/usr/local/bin",
"vector" : "1",
"intensity" : "15",
"worksize" : "128",
"lookup-gap" : "2",
"gpu-threads" : "1",
"gpu-engine" : "725",
"gpu-memclock" : "1000",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"gpu-dyninterval" : "10",
"auto-fan" : true,
"auto-gpu" : true,
"gpu-fan" : "50-100",
"temp-cutoff" : "95",
"temp-overheat" : "90",
"temp-target" : "68",
"temp-hysteresis" : "3",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-network" : true,
"api-port" : "4028",
"failover-switch-delay" : "30",
"log" : "5",
"no-pool-disable" : true,
"no-submit-stale" : true,
"tcp-keepalive" : "30",
"worktime" : true,
"shares" : "0",
"queue" : "3",
"expiry" : "60",
"scan-time" : "60",
"show-coindiff" : true,
"gpu-platform" : "0",
"device" : "0"
}

5850? I'm mildly surprised it mines at all.

Surprised ?
That card mines good. and it costs 50eu used.

This is my setting below.
HD5850 is the first one. The second one is HD5870 and the third and the fourth one is HD5970

All are HD5XXX series. and all are mining perfect

"intensity" : "20,20,19,19",
"gpu-engine" : "0-900,0-925,0-820,0-820",
"gpu-memclock" : "0-350,0-350,0-350,0-350",
"thread-concurrency" : "0,0,0,0",
"worksize" : "64,64,64,64",
"lookup-gap" : "2,2,2,2",
"shaders" : "0,0,0,0",
"gpu-threads" : "1,1,1,1",
"gpu-fan" : "60-100,60-100,60-100,60-100",
"auto-fan" : true,
"gpu-memdiff" : "0",
"gpu-powertune" : "20,20,20,20",
"gpu-vddc" : "0.000",
"temp-cutoff" : "95,95,95,95",
"temp-overheat" : "85,85,85,85",
"temp-target" : "65,60,65,65",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-only" : true,
"failover-switch-delay" : "10",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"no-client-reconnect" : true,
"queue" : "2",
"scan-time" : "3",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"no-submit-stale" : true,
"submit-stale" : "false",
"kernel" : "x13modold",
"kernel-path" : "/usr/local/bin"
}

[D3vil_A]

Hi Guys
Im mining with R9 290ref , 280X Gaming and 270X Dual-X
i just need to ask can anyone help me to get more mh/s on these gpus?
i read this thread i think im getting highest hashrate but any help can be fine

R9 290 @ 1030/1250MHZ = 5.25MH/s
R9 280X @ 1100/1550MH = 4.2MH/s
R9 270X @ 1140/1450MHZ = 2.65MH/s

all of gpus are running at amd 14.6 beta driver

thnaks.

[mellon]

Hi. Plz help me, how i can update my sgminer on BAMT.(now use 4.1 version). And what settings better use on R9 280x Sapphire 3Gb. Now my hash rate on x11 max 2350 H/s max. And on X13 i get reject. Ty))

[D3vil_A]

Hi Guys
Im mining with R9 290ref , 280X Gaming and 270X Dual-X
i just need to ask can anyone help me to get more mh/s on these gpus?
i read this thread i think im getting highest hashrate but any help can be fine

R9 290 @ 1030/1250MHZ = 5.25MH/s
R9 280X @ 1100/1550MH = 4.2MH/s
R9 270X @ 1140/1450MHZ = 2.65MH/s

all of gpus are running at amd 14.6 beta driver

thnaks.

Up the core clock on 280X - it can go higher.

My clock is 1200 on 280X, but you probably can't go that high.

Screenshot (custom code, NSFW): https://ottrbutt.com/miner/x11localrigwolf-11182014.png

thanks to Wolf0
what are your GPUs? and 280X brand?
mine is MSI R9 280Xs Gaming ! the worst 280Xs i have ever seen in my life ! cant get 1200MHZ and also cant mine scrypt algo after 5month becuase of temp !

[chadwickx16]

Hi. Plz help me, how i can update my sgminer on BAMT.(now use 4.1 version). And what settings better use on R9 280x Sapphire 3Gb. Now my hash rate on x11 max 2350 H/s max. And on X13 i get reject. Ty))

Have you checked out the BAMT Reddit?

[hitndahedfred]

In case anyone is still running old iron here is my config for my AMD HD 6970s.  If anyone can improve this,,, please feel free to make suggestions.

On GPU0 @ I 13 I am getting 617 Kh   ( run this GPU at 13 while using the PC)
On GPU1 @ I 18 I am getting 1.679 Mh

"intensity" : "13,18",
"worksize" : "256",
"kernel" : "x11mod",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"gpu-threads" : "2",
"gpu-engine" : "880-880",
"gpu-fan" : "30-55",
"gpu-memclock" : "1375-1375",
"gpu-powertune" : "20",
"temp-cutoff" : "90",
"temp-overheat" : "81",
"temp-target" : "75",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "28",
"failover-switch-delay" : "60",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "1",
"tcp-keepalive" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"

This is my first experience with the X11 client.

[oneoff]

Did a little work on the algos specific to x13 and x15 for a change - nice and easy improvements to both. Higher than 5MH/s x13 on 280X with a moderate overclock.

Screenshot (nsfw): https://ottrbutt.com/miner/x13localrigwolf-11252014.png

Your desktop backgrounds are weird. I bet you are single, living together with your forever companion; the computer.

[elmanager]

   Yoo Im with a new modified sgminer
Works great on Win7 and Win8.1

  Tri-X 290




  280X




    And this is in ECO-mode..hahhahah

[elmanager]

  Yoo Im with a new modified sgminer
Works great on Win7 and Win8.1

  Tri-X 290




  280X




    And this is in ECO-mode..hahhahah

At least tell them where you got it; it's mine.

Probably it looks like yours but is better, I know personally the guy who has modified the 8 kernels in this, cause is my cousin!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Don't bark W0lfie )), you aren't the only one!

[pallas]

I don't care about the bin files but I'd really love to have a look at the code :-)

[elmanager]

  Yoo Im with a new modified sgminer
Works great on Win7 and Win8.1

  Tri-X 290




  280X




    And this is in ECO-mode..hahhahah

At least tell them where you got it; it's mine.

Probably it looks like yours but is better, I know personally the guy who has modified the 8 kernels in this, cause is my cousin!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Don't bark W0lfie )), you aren't the only one!

Yeah, a few hours after the leak, you show up with exactly the same hashrates as the leaked kernel and claim it's a coincidence; get real. I just posted better bins in the thread you got that from, you better go fetch them and say your friend gave you an update.  

  Im telling you again is not yours.Just now decide to share, I have it more than 10 days and is not the same hashrates as yours because I don't clock mine to the moon like you ))
finally 8 new kernels
P.S.
Probable my cousin has lied to me!

[Foss]

  Yoo Im with a new modified sgminer
Works great on Win7 and Win8.1

  Tri-X 290




  280X




    And this is in ECO-mode..hahhahah

At least tell them where you got it; it's mine.

Probably it looks like yours but is better, I know personally the guy who has modified the 8 kernels in this, cause is my cousin!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Don't bark W0lfie )), you aren't the only one!

Yeah, a few hours after the leak, you show up with exactly the same hashrates as the leaked kernel and claim it's a coincidence; get real. I just posted better bins in the thread you got that from, you better go fetch them and say your friend gave you an update.  

  Im telling you again is not yours.Just now decide to share, I have it more than 10 days and is not the same hashrates as yours because I don't clock mine to the moon like you ))
finally 8 new kernels
P.S.
Probable my cousin has lied to me!

Please share this kernel don't be a Wolf