MoparMiningLLC
aka Stryfe
Legendary
Online
Activity: 2072
Merit: 2224
EIN: 82-3893490
|
|
April 20, 2021, 02:56:54 PM |
|
@patrike
I see you support the goldshell HS3 and HS5 - any possibility of supporting the HS1 Plus ?
Do you have access to the HS1 Plus miner right now? Could you please send me the API report for it via PM or mail. You can access the API Report via the toolbar Tools -> API Report. Goldshell HS3 and HS5 was so similar from a monitoring point of view that I couldn't even tell them apart. It's likely that HS1 also are similar. I have access to the miner but AM does not see it. I have tried locate it with AM on the network (I know the ip address) but I cannot get AM to see it. I was hoping the HS1 miner would be similar to the more recent Goldshell miners, but unfortunately it sounds like it doesn't have any active monitoring interface. Are there any settings in the web interface for this miner that would indicate that you could enable the API or monitoring? it runs in a CLI window - I dont see or know of any options screens. I really know very little about it other than that it runs perfectly and has already ROI'd
|
|
|
|
|
|
Even in the event that an attacker gains more than 50% of the network's
computational power, only transactions sent by the attacker could be
reversed or double-spent. The network would not be destroyed.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
ralf007at
Newbie
Offline
Activity: 52
Merit: 0
|
|
April 21, 2021, 08:57:36 AM |
|
Hi Patrik,
is the Awesome-Miner Firmware also working for the S9K-Version?
BR Ralf
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1084
|
|
April 22, 2021, 06:08:21 AM |
|
Hi Patrik,
is the Awesome-Miner Firmware also working for the S9K-Version?
BR Ralf
Hi Ralf, The S9 firmware only works on Antminer S9, S9i and S9j. It's unfortunately not supporting S9K / S9SE.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
Commie
|
|
April 28, 2021, 06:48:09 AM |
|
If needed i can make a description for other guys for mining Zilliqa with Aweseomeminer.
Please do, I've been trying to figure out how to dual mine ETH+ZIL in AM for a while but no success so far. Any help will be appreciated. PS Is it possible to dual mine them using ETH pool other that ezil?
|
|
|
|
sxemini
Member
Offline
Activity: 1558
Merit: 69
|
|
April 28, 2021, 10:01:12 AM |
|
If needed i can make a description for other guys for mining Zilliqa with Aweseomeminer.
Please do, I've been trying to figure out how to dual mine ETH+ZIL in AM for a while but no success so far. Any help will be appreciated. PS Is it possible to dual mine them using ETH pool other that ezil? Ok i make one tonight. You can mine ETH+ZIL on any pool. ERG+ZIL, VTC+ZIL, XHV+ZIL works on shardpool and ezil at the moment, but i have problems on rustpool, but i work on it. With Zilswitcher you can mine every coin with Zil on Awesome Miner.
|
|
|
|
Commie
|
|
April 28, 2021, 12:28:13 PM |
|
If needed i can make a description for other guys for mining Zilliqa with Aweseomeminer.
Please do, I've been trying to figure out how to dual mine ETH+ZIL in AM for a while but no success so far. Any help will be appreciated. PS Is it possible to dual mine them using ETH pool other that ezil? Ok i make one tonight. You can mine ETH+ZIL on any pool. ERG+ZIL, VTC+ZIL, XHV+ZIL works on shardpool and ezil at the moment, but i have problems on rustpool, but i work on it. With Zilswitcher you can mine every coin with Zil on Awesome Miner. Ideally I'd like to stay on Binance for ETH and switch to any other pool for ZIL. Not sure though if such a setup can be configured in AM...
|
|
|
|
sxemini
Member
Offline
Activity: 1558
Merit: 69
|
|
April 28, 2021, 12:54:04 PM Last edit: April 29, 2021, 09:29:33 AM by sxemini |
|
If needed i can make a description for other guys for mining Zilliqa with Aweseomeminer.
Please do, I've been trying to figure out how to dual mine ETH+ZIL in AM for a while but no success so far. Any help will be appreciated. PS Is it possible to dual mine them using ETH pool other that ezil? Ok i make one tonight. You can mine ETH+ZIL on any pool. ERG+ZIL, VTC+ZIL, XHV+ZIL works on shardpool and ezil at the moment, but i have problems on rustpool, but i work on it. With Zilswitcher you can mine every coin with Zil on Awesome Miner. Ideally I'd like to stay on Binance for ETH and switch to any other pool for ZIL. Not sure though if such a setup can be configured in AM... Yes sure it is no problem, you can mine ETH everywhere and you can mine ZIL everywhere. I make an description for you. Here my config, only change the specifie data. This is the short way mining ZIL on rustpool and eth on ethermine. and if you want to see rig names This is for Teamredminer, if you use phönixminer, only need the first screenshot i think.
|
|
|
|
Antihackme
Newbie
Offline
Activity: 39
Merit: 0
|
|
April 29, 2021, 11:42:24 AM |
|
Hi guys,
Can someone let me know if awesome miner bills avalon 921 by number of controllers or by each miner in a cluster ?
|
|
|
|
Commie
|
|
April 29, 2021, 10:19:22 PM Last edit: April 29, 2021, 11:21:43 PM by Commie |
|
Ideally I'd like to stay on Binance for ETH and switch to any other pool for ZIL. Not sure though if such a setup can be configured in AM...
Yes sure it is no problem, you can mine ETH everywhere and you can mine ZIL everywhere. I make an description for you. Here my config, only change the specifie data. This is the short way mining ZIL on rustpool and eth on ethermine. and if you want to see rig names This is for Teamredminer, if you use phönixminer, only need the first screenshot i think. Thanks for instructions, sent some merit your way Couple of questions: - on Binance pool you don't use wallet address but your account name. Am I right thinking I should use it instead of ETH address? - ETH pool string after ZIL addy should look like @pool:port@8G ? - A bit of offtopic, but what are typical Nvidia OC settings for ZIL, same as ETH?
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1084
|
|
April 30, 2021, 09:41:00 AM |
|
Hi guys,
Can someone let me know if awesome miner bills avalon 921 by number of controllers or by each miner in a cluster ?
Awesome Miner only connects to the Controller for monitoring. For this reason, only one license per controller is required.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1084
|
|
April 30, 2021, 11:32:53 AM |
|
Awesome Miner version 8.4.6
Features - Remote Agent includes both English and Russian language. The language can be changed via the Remote Agent context menu. - New status filter to only show enabled miners - New property filter for miner group name - Added additional wallet balance units Changes - When selecting miner groups, only consider visible miners for the groups, not those hidden by filters - Optimized CPU usage and bandwidth usage for built-in web server Mining software - TeamRedMiner 0.8.2 - XmRig 6.12.1 - Gminer 2.54 - RhMiner 2.3b - Nanominer 3.3.5
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
sxemini
Member
Offline
Activity: 1558
Merit: 69
|
|
April 30, 2021, 12:02:55 PM |
|
Ideally I'd like to stay on Binance for ETH and switch to any other pool for ZIL. Not sure though if such a setup can be configured in AM...
Yes sure it is no problem, you can mine ETH everywhere and you can mine ZIL everywhere. I make an description for you. Here my config, only change the specifie data. This is the short way mining ZIL on rustpool and eth on ethermine. and if you want to see rig names This is for Teamredminer, if you use phönixminer, only need the first screenshot i think. Thanks for instructions, sent some merit your way Couple of questions: - on Binance pool you don't use wallet address but your account name. Am I right thinking I should use it instead of ETH address? - ETH pool string after ZIL addy should look like @pool:port@8G ? - A bit of offtopic, but what are typical Nvidia OC settings for ZIL, same as ETH? Ah ok sorry, i will take a look into binancepool and will report later to you. Yes Zil use the same OC as ETH, because it is the same algo I will rework the config for binance pool for you.
|
|
|
|
Commie
|
|
May 02, 2021, 05:55:13 AM |
|
Ah ok sorry, i will take a look into binancepool and will report later to you. Yes Zil use the same OC as ETH, because it is the same algo I will rework the config for binance pool for you. Can't make it work with these settings so far, Phoenix shuts down immediately after start.
|
|
|
|
narousberg
Legendary
Offline
Activity: 1749
Merit: 1007
|
|
May 02, 2021, 05:33:40 PM |
|
Hi Patrike, can you please add a additional information to notification for "accept no shares" rule, like a algorithm and pool. This will help for future settings diagnose if user cant check notification immedetly. Regards.
|
I AM NOT SELL MY BITCOINTALK ACCOUNT !!!
|
|
|
narousberg
Legendary
Offline
Activity: 1749
Merit: 1007
|
|
May 02, 2021, 05:55:57 PM |
|
One another thing. I have situation when one of my GPU in the rig dont want start and i need process rig reboot. For this situation i created a rule where as trigger i use: Check statistic (hashrate, shares) Property: Avg. hashrate -> Current Compare operation: Less or equal Compare with percent of profit profile: 88
With this logic i catch hashrate drop of one or more GPU and then process reboot. Problem come when rigs switching to Nicehash. Sometimes during internal switching between orders on Nicehash, the hashrate drops till 0 and of course my rule will be activated. How can i ignore such situation in rule logic? Maybe this trigger must be improved and added possibility to add some delay timer, which will wait some time before rule action will be activated. Regards.
|
I AM NOT SELL MY BITCOINTALK ACCOUNT !!!
|
|
|
joseph32
Member
Offline
Activity: 413
Merit: 21
|
|
May 03, 2021, 07:14:13 AM |
|
@Narousberg:
A quick solution would be this:
Do another trigger in the same rule with the same settings, but with this property: Avg. hashrate 1 minute ago (or any other minute you prefer).
Below mark the "Match all" button.
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1084
|
|
May 04, 2021, 01:36:13 PM |
|
Hi Patrike, can you please add a additional information to notification for "accept no shares" rule, like a algorithm and pool. This will help for future settings diagnose if user cant check notification immedetly. Regards.
Thanks, this is a good point. You can expect an improvement in the next release.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
sxemini
Member
Offline
Activity: 1558
Merit: 69
|
|
May 05, 2021, 11:08:51 AM |
|
Ah ok sorry, i will take a look into binancepool and will report later to you. Yes Zil use the same OC as ETH, because it is the same algo I will rework the config for binance pool for you. Can't make it work with these settings so far, Phoenix shuts down immediately after start. This config is for Teamredminer as you can see i added some teamredminer commands to the commandline. Delete all the teamredminer commands and it work.
|
|
|
|
narousberg
Legendary
Offline
Activity: 1749
Merit: 1007
|
|
May 05, 2021, 04:34:40 PM |
|
Hi Patrike, today i have created a rig with mixed cards, 4 x 3060ti + 2 x 3090 for this design i have used two miner objects, one with 4 x 3060ti and other with 2 x 3090. For every miner object i have selected only GPU IDs which belongs for 3060ti and 3090 of course. Every virtual rig have own profit profile. Problem is that the power usage for one of this rig (4x3060ti) will be displayed wrong. To much watts. I use for both virtual miners NBMiner. If i check it terminal output of NBMiner, the watt usage per card is ok (124watt on Etherium for 3060ti), but AM show wrong (874 w). In the same time, when both virual miners work, the miner object for 2x3090 show correct power usage. If i stop miner with 2x3090, then displayed in AM power usage for 4x 3060ti is to less as normal (350 w). Whats wrong? Regards.
|
I AM NOT SELL MY BITCOINTALK ACCOUNT !!!
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3318
Merit: 1084
|
|
May 06, 2021, 08:45:12 AM |
|
Hi Patrike, today i have created a rig with mixed cards, 4 x 3060ti + 2 x 3090 for this design i have used two miner objects, one with 4 x 3060ti and other with 2 x 3090. For every miner object i have selected only GPU IDs which belongs for 3060ti and 3090 of course. Every virtual rig have own profit profile. Problem is that the power usage for one of this rig (4x3060ti) will be displayed wrong. To much watts. I use for both virtual miners NBMiner. If i check it terminal output of NBMiner, the watt usage per card is ok (124watt on Etherium for 3060ti), but AM show wrong (874 w). In the same time, when both virual miners work, the miner object for 2x3090 show correct power usage. If i stop miner with 2x3090, then displayed in AM power usage for 4x 3060ti is to less as normal (350 w). Whats wrong? Regards.
Hi, 1) Please make sure you don't have any custom GPU mapping enabled (make sure the icon for "Map to system monitoring" is blue, not green). By not having a custom GPU mapping, Awesome Miner will try to map the specific GPUs reported by the mining software to the correct GPU 2) If you still experience this issue, can you please generate and send me an API report for this miner while running (via the toolbar Tools -> API Report). Thanks!
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
|