[HYP] HyperStake | Generous Reward Staking | Advanced Staking Controls & Wallet

[Biomech]

Thanks for your help ax66: I tried but again no luck.
I also disabled Antivir and Firewall.
It's so strange

make sure you have the right port defined in your conf file. It's in the OP. I can't recall it off the top of my head. But the default is (or was) the same as TruckCoin, and needs to be defined.

Here is a post on their facebook site from July of 2014, version 1.01 is obviously outdated, but if that's the version you're using that could be where you went wrong?
Version 1.01 is here. Changelog:
- Port change to 18777 so it can run side by side with TRK

I didn't make a .conf file for this coin because I never needed to, but here are the two port numbers from June 2015:
RPC Port: 18776
P2P Port:  18775

EDIT: I will try to get you some nodes when I get home.

I think it only matters if you're running both wallets, but it was all I could think of

[1714782268]

1714782268

[1714782268]

1714782268

[RiotMachine]

Thanks for your help ax66: I tried but again no luck.
I also disabled Antivir and Firewall.
It's so strange

Have you already made a .conf file for this coin?

[Karartma1]

I uninstalled everything from a win 8 64 bit machine. I'll try again from a win 7 64 pc.
Thanks for all the tips.
I'll do as you guys say.

Maybe it could have been a blocked port because everything else was fine.

[bitmaster1x]

Good to see a rise in volume on HYP

[Karartma1]

Thanks for your help ax66: I tried but again no luck.
I also disabled Antivir and Firewall.
It's so strange

just to humor myself, did you dl this wallet?
https://github.com/hyperstake/HyperStake/releases/tag/v1.1.3

p.s.
actually all nodes i mentioned above were running on p2p 18775

Yes, I am (was) using the latest wallet.
I'll try again maybe during the weekend because I can't spend too much time on this. Thanks for helping

[ziomar]

Hi there,

I just installed the hyp wallet on my ubuntu computer.
The wallet version is 1.1.3.
The issue is that the wallet can not connected to the HYP network.
I've tried to add manually some node on my . conf file, but still no results.

Please help me to solve this issue.

Bye

[sokol]

Hi there,

I just installed the hyp wallet on my ubuntu computer.
The wallet version is 1.1.3.
The issue is that the wallet can not connected to the HYP network.
I've tried to add manually some node on my . conf file, but still no results.

Please help me to solve this issue.

Bye

try to add to conf file that list of nodes. With that list my wallet has fully synced from scratch 2 days ago

Code:

addnode=85.25.44.119
addnode=104.128.224.13
addnode=162.255.117.105
addnode=85.10.200.36
addnode=85.157.208.217
addnode=115.28.38.190
addnode=95.91.201.136
addnode=91.134.120.222
addnode=52.8.14.111
addnode=45.63.16.204
addnode=85.25.44.119
addnode=85.25.44.119
addnode=207.200.46.226
addnode=90.161.84.133
addnode=85.25.44.119
addnode=144.76.80.131
addnode=84.24.19.223
addnode=76.31.209.129
addnode=85.25.44.119
addnode=69.118.78.156
addnode=185.41.154.126
addnode=62.210.178.164
addnode=85.25.44.119
addnode=85.25.44.119
addnode=46.164.187.245
addnode=108.61.170.22
addnode=91.134.149.69
addnode=88.89.134.123
addnode=72.185.23.235
addnode=5.189.144.97
addnode=85.245.102.195
addnode=84.196.192.252
addnode=98.115.147.74
addnode=93.109.240.14
addnode=95.90.250.138
addnode=58.84.148.227
addnode=77.250.96.195
addnode=23.88.59.245
addnode=178.26.173.180
addnode=101.165.159.131
addnode=82.134.214.92
addnode=82.3.166.8
addnode=104.159.241.2
addnode=109.130.136.165
addnode=49.145.115.201
addnode=27.254.216.41
addnode=72.34.178.7
addnode=24.10.187.111
addnode=109.2.161.14
addnode=78.147.173.23
addnode=24.4.45.219
addnode=193.166.139.206
addnode=50.34.139.183
addnode=79.183.83.176
addnode=72.186.22.189
addnode=107.2.101.201
addnode=184.99.74.195
addnode=97.83.211.91
addnode=86.26.193.93
addnode=24.85.114.101
addnode=178.169.179.192
addnode=107.184.222.247
addnode=185.48.78.78
addnode=149.202.42.77
addnode=93.80.85.3
addnode=178.157.251.166
addnode=104.32.144.248
addnode=97.92.217.92
addnode=45.25.237.27
addnode=71.9.170.207
addnode=72.10.217.60
addnode=66.255.209.13
addnode=84.122.163.180
addnode=151.80.94.224
addnode=81.11.201.4
addnode=69.129.204.112
addnode=37.48.85.34
addnode=99.82.252.16
addnode=73.70.55.162
addnode=2.26.182.69
addnode=94.231.134.158
addnode=47.20.250.38
addnode=104.136.222.147
addnode=86.128.152.87
addnode=75.129.188.90
addnode=119.224.94.113
addnode=50.24.221.52
addnode=104.192.150.193
addnode=89.172.128.130
addnode=185.57.31.17
addnode=86.164.143.237
addnode=81.153.250.120
addnode=183.90.168.129
addnode=86.128.152.87
addnode=94.137.44.5
addnode=98.202.147.55
addnode=82.46.79.119
addnode=176.155.87.56
addnode=77.22.160.106
addnode=24.51.169.159
addnode=78.203.30.21
addnode=73.132.158.88
addnode=78.14.248.233
addnode=95.122.122.200
addnode=74.105.78.6
addnode=173.255.176.5
addnode=95.91.235.1
addnode=83.192.12.239
addnode=5.186.120.7
addnode=172.97.208.34
addnode=71.241.144.171

[presstab]

Hi there,

I just installed the hyp wallet on my ubuntu computer.
The wallet version is 1.1.3.
The issue is that the wallet can not connected to the HYP network.
I've tried to add manually some node on my . conf file, but still no results.

Please help me to solve this issue.

Bye

try to add to conf file that list of nodes. With that list my wallet has fully synced from scratch 2 days ago

Code:

addnode=85.25.44.119
addnode=104.128.224.13
addnode=162.255.117.105
addnode=85.10.200.36
addnode=85.157.208.217
addnode=115.28.38.190
addnode=95.91.201.136
addnode=91.134.120.222
addnode=52.8.14.111
addnode=45.63.16.204
addnode=85.25.44.119
addnode=85.25.44.119
addnode=207.200.46.226
addnode=90.161.84.133
addnode=85.25.44.119
addnode=144.76.80.131
addnode=84.24.19.223
addnode=76.31.209.129
addnode=85.25.44.119
addnode=69.118.78.156
addnode=185.41.154.126
addnode=62.210.178.164
addnode=85.25.44.119
addnode=85.25.44.119
addnode=46.164.187.245
addnode=108.61.170.22
addnode=91.134.149.69
addnode=88.89.134.123
addnode=72.185.23.235
addnode=5.189.144.97
addnode=85.245.102.195
addnode=84.196.192.252
addnode=98.115.147.74
addnode=93.109.240.14
addnode=95.90.250.138
addnode=58.84.148.227
addnode=77.250.96.195
addnode=23.88.59.245
addnode=178.26.173.180
addnode=101.165.159.131
addnode=82.134.214.92
addnode=82.3.166.8
addnode=104.159.241.2
addnode=109.130.136.165
addnode=49.145.115.201
addnode=27.254.216.41
addnode=72.34.178.7
addnode=24.10.187.111
addnode=109.2.161.14
addnode=78.147.173.23
addnode=24.4.45.219
addnode=193.166.139.206
addnode=50.34.139.183
addnode=79.183.83.176
addnode=72.186.22.189
addnode=107.2.101.201
addnode=184.99.74.195
addnode=97.83.211.91
addnode=86.26.193.93
addnode=24.85.114.101
addnode=178.169.179.192
addnode=107.184.222.247
addnode=185.48.78.78
addnode=149.202.42.77
addnode=93.80.85.3
addnode=178.157.251.166
addnode=104.32.144.248
addnode=97.92.217.92
addnode=45.25.237.27
addnode=71.9.170.207
addnode=72.10.217.60
addnode=66.255.209.13
addnode=84.122.163.180
addnode=151.80.94.224
addnode=81.11.201.4
addnode=69.129.204.112
addnode=37.48.85.34
addnode=99.82.252.16
addnode=73.70.55.162
addnode=2.26.182.69
addnode=94.231.134.158
addnode=47.20.250.38
addnode=104.136.222.147
addnode=86.128.152.87
addnode=75.129.188.90
addnode=119.224.94.113
addnode=50.24.221.52
addnode=104.192.150.193
addnode=89.172.128.130
addnode=185.57.31.17
addnode=86.164.143.237
addnode=81.153.250.120
addnode=183.90.168.129
addnode=86.128.152.87
addnode=94.137.44.5
addnode=98.202.147.55
addnode=82.46.79.119
addnode=176.155.87.56
addnode=77.22.160.106
addnode=24.51.169.159
addnode=78.203.30.21
addnode=73.132.158.88
addnode=78.14.248.233
addnode=95.122.122.200
addnode=74.105.78.6
addnode=173.255.176.5
addnode=95.91.235.1
addnode=83.192.12.239
addnode=5.186.120.7
addnode=172.97.208.34
addnode=71.241.144.171

A good list of nodes can also be found at http://www.presstab.pw/phpexplorer/HYP/nodes.php

Something everyone should keep in mind is that for every operating system except windows, your .conf needs to have the correct camel case. ie HyperStake.conf

[ziomar]

Hi there,

I just installed the hyp wallet on my ubuntu computer.
The wallet version is 1.1.3.
The issue is that the wallet can not connected to the HYP network.
I've tried to add manually some node on my . conf file, but still no results.

Please help me to solve this issue.

Bye

try to add to conf file that list of nodes. With that list my wallet has fully synced from scratch 2 days ago

Code:

addnode=85.25.44.119
addnode=104.128.224.13
addnode=162.255.117.105
addnode=85.10.200.36
addnode=85.157.208.217
addnode=115.28.38.190
addnode=95.91.201.136
addnode=91.134.120.222
addnode=52.8.14.111
addnode=45.63.16.204
addnode=85.25.44.119
addnode=85.25.44.119
addnode=207.200.46.226
addnode=90.161.84.133
addnode=85.25.44.119
addnode=144.76.80.131
addnode=84.24.19.223
addnode=76.31.209.129
addnode=85.25.44.119
addnode=69.118.78.156
addnode=185.41.154.126
addnode=62.210.178.164
addnode=85.25.44.119
addnode=85.25.44.119
addnode=46.164.187.245
addnode=108.61.170.22
addnode=91.134.149.69
addnode=88.89.134.123
addnode=72.185.23.235
addnode=5.189.144.97
addnode=85.245.102.195
addnode=84.196.192.252
addnode=98.115.147.74
addnode=93.109.240.14
addnode=95.90.250.138
addnode=58.84.148.227
addnode=77.250.96.195
addnode=23.88.59.245
addnode=178.26.173.180
addnode=101.165.159.131
addnode=82.134.214.92
addnode=82.3.166.8
addnode=104.159.241.2
addnode=109.130.136.165
addnode=49.145.115.201
addnode=27.254.216.41
addnode=72.34.178.7
addnode=24.10.187.111
addnode=109.2.161.14
addnode=78.147.173.23
addnode=24.4.45.219
addnode=193.166.139.206
addnode=50.34.139.183
addnode=79.183.83.176
addnode=72.186.22.189
addnode=107.2.101.201
addnode=184.99.74.195
addnode=97.83.211.91
addnode=86.26.193.93
addnode=24.85.114.101
addnode=178.169.179.192
addnode=107.184.222.247
addnode=185.48.78.78
addnode=149.202.42.77
addnode=93.80.85.3
addnode=178.157.251.166
addnode=104.32.144.248
addnode=97.92.217.92
addnode=45.25.237.27
addnode=71.9.170.207
addnode=72.10.217.60
addnode=66.255.209.13
addnode=84.122.163.180
addnode=151.80.94.224
addnode=81.11.201.4
addnode=69.129.204.112
addnode=37.48.85.34
addnode=99.82.252.16
addnode=73.70.55.162
addnode=2.26.182.69
addnode=94.231.134.158
addnode=47.20.250.38
addnode=104.136.222.147
addnode=86.128.152.87
addnode=75.129.188.90
addnode=119.224.94.113
addnode=50.24.221.52
addnode=104.192.150.193
addnode=89.172.128.130
addnode=185.57.31.17
addnode=86.164.143.237
addnode=81.153.250.120
addnode=183.90.168.129
addnode=86.128.152.87
addnode=94.137.44.5
addnode=98.202.147.55
addnode=82.46.79.119
addnode=176.155.87.56
addnode=77.22.160.106
addnode=24.51.169.159
addnode=78.203.30.21
addnode=73.132.158.88
addnode=78.14.248.233
addnode=95.122.122.200
addnode=74.105.78.6
addnode=173.255.176.5
addnode=95.91.235.1
addnode=83.192.12.239
addnode=5.186.120.7
addnode=172.97.208.34
addnode=71.241.144.171

A good list of nodes can also be found at http://www.presstab.pw/phpexplorer/HYP/nodes.php

Something everyone should keep in mind is that for every operating system except windows, your .conf needs to have the correct camel case. ie HyperStake.conf

Thank you,

Problem solved

[sokol]

What block size should I make and how long should I wait before stake now?

[Dexter12]

What block size should I make and how long should I wait before stake now?

Try 15-20k blocks and unlock your wallet after about 12 days.

[dsutil]

Hello.

Recently, I have configured hyperstake on a Raspbian to stake hyperstake for first time.

I have compiled the last version succesfully and after looooooong wait with the blokchain syncing the daemon synced ok, but the system shows in the getinfo that it isn't staking, so I restarted the daemon.
After that, the daemon don't sync with the blockchain and I'm getting the following error in the debug.log:

Code:

REORGANIZE
REORGANIZE: Disconnect 0 blocks; 4f8772e008dff56fd57e..4f8772e008dff56fd57e
REORGANIZE: Connect 1 blocks; 4f8772e008dff56fd57e..edcf9c264d13243f48ee
ERROR: FetchInputs() : 2746f1efd2 prev tx 6d22d5b3d2 index entry not found
ERROR: Reorganize() : ConnectBlock edcf9c264d13243f48ee failed
InvalidChainFound: invalid block=2d694fc32df9bdd1bb08  height=752378  trust=203801641562243582  date=08/11/16 18:59:14
InvalidChainFound:  current best=4f8772e008dff56fd57e  height=752237  trust=203718388860449815  date=08/11/16 15:14:44
ERROR: SetBestChain() : Reorganize failed
ERROR: AcceptBlock() : AddToBlockIndex failed
ERROR: ProcessBlock() : AcceptBlock FAILED
INFO: Waiting 1470942059 sec which is too long. Sending GetBlocks(0)
ERROR: FetchInputs() : 5908ca0cb9 mempool Tx prev not found 8aaf9795b1

Any help will be appreciated.

Thanks.

[ziomar]

HI

may I ask how to manage the autosplit function with the 1.1.3 wallet @ubuntu

Thank you

[ripper_roo]

Hello guys

I installed version 1.1.3 on WIndows10 x64 but the wallet was out of sync. I read an article on http://hyperstake.wikia.com/. It should automatically connects to nodes.

But what I found is 0 node connected and wallet was offline. So, I try to manually add node 6-7 nodes from http://www.presstab.pw/phpexplorer/HYP/nodes.php on "Debug console".
Then , my wallet now have 5 actives connections.

My question is do I have to manually added node from the website?? (It was superb long list! and this would take time)
Or, did I miss some steps??

Thanks

[sparksi]

Hello guys

I installed version 1.1.3 on WIndows10 x64 but the wallet was out of sync. I read an article on http://hyperstake.wikia.com/. It should automatically connects to nodes.

But what I found is 0 node connected and wallet was offline. So, I try to manually add node 6-7 nodes from http://www.presstab.pw/phpexplorer/HYP/nodes.php on "Debug console".
Then , my wallet now have 5 actives connections.

My question is do I have to manually added node from the website?? (It was superb long list! and this would take time)
Or, did I miss some steps??

Thanks

Go to %appdata%/HyperStake and create file called HyperStake.conf. Add those nodes there by adding following lines addnode=<ip address>.

[Biomech]

Hello guys

I installed version 1.1.3 on WIndows10 x64 but the wallet was out of sync. I read an article on http://hyperstake.wikia.com/. It should automatically connects to nodes.

But what I found is 0 node connected and wallet was offline. So, I try to manually add node 6-7 nodes from http://www.presstab.pw/phpexplorer/HYP/nodes.php on "Debug console".
Then , my wallet now have 5 actives connections.

My question is do I have to manually added node from the website?? (It was superb long list! and this would take time)
Or, did I miss some steps??

Thanks

if you have even one active connection, it should find more. It's also, as mentioned above, easier to add them to your config file. If one goes bad it will be ignored, so a long list is not a big deal.

[ripper_roo]

Hello guys

I installed version 1.1.3 on WIndows10 x64 but the wallet was out of sync. I read an article on http://hyperstake.wikia.com/. It should automatically connects to nodes.

But what I found is 0 node connected and wallet was offline. So, I try to manually add node 6-7 nodes from http://www.presstab.pw/phpexplorer/HYP/nodes.php on "Debug console".
Then , my wallet now have 5 actives connections.

My question is do I have to manually added node from the website?? (It was superb long list! and this would take time)
Or, did I miss some steps??

Thanks

if you have even one active connection, it should find more. It's also, as mentioned above, easier to add them to your config file. If one goes bad it will be ignored, so a long list is not a big deal.

Perfect. How to add the list to config file?

[ripper_roo]

Hello guys

I installed version 1.1.3 on WIndows10 x64 but the wallet was out of sync. I read an article on http://hyperstake.wikia.com/. It should automatically connects to nodes.

But what I found is 0 node connected and wallet was offline. So, I try to manually add node 6-7 nodes from http://www.presstab.pw/phpexplorer/HYP/nodes.php on "Debug console".
Then , my wallet now have 5 actives connections.

My question is do I have to manually added node from the website?? (It was superb long list! and this would take time)
Or, did I miss some steps??

Thanks

Go to %appdata%/HyperStake and create file called HyperStake.conf. Add those nodes there by adding following lines addnode=<ip address>.

Thanks! Let me try that

[skyline_king]

alright been reading how to get to add the nodes.. i can not steam to get it to get any active connections..
i'v added the .cfg file and i'v renamed the bootstrap file.

i just keep getting 0 active connections and out of sync wallet..

[dsutil]

Hello.

Recently, I have configured hyperstake on a Raspbian to stake hyperstake for first time.

I have compiled the last version succesfully and after looooooong wait with the blokchain syncing the daemon synced ok, but the system shows in the getinfo that it isn't staking, so I restarted the daemon.
After that, the daemon don't sync with the blockchain and I'm getting the following error in the debug.log:

Code:

REORGANIZE
REORGANIZE: Disconnect 0 blocks; 4f8772e008dff56fd57e..4f8772e008dff56fd57e
REORGANIZE: Connect 1 blocks; 4f8772e008dff56fd57e..edcf9c264d13243f48ee
ERROR: FetchInputs() : 2746f1efd2 prev tx 6d22d5b3d2 index entry not found
ERROR: Reorganize() : ConnectBlock edcf9c264d13243f48ee failed
InvalidChainFound: invalid block=2d694fc32df9bdd1bb08  height=752378  trust=203801641562243582  date=08/11/16 18:59:14
InvalidChainFound:  current best=4f8772e008dff56fd57e  height=752237  trust=203718388860449815  date=08/11/16 15:14:44
ERROR: SetBestChain() : Reorganize failed
ERROR: AcceptBlock() : AddToBlockIndex failed
ERROR: ProcessBlock() : AcceptBlock FAILED
INFO: Waiting 1470942059 sec which is too long. Sending GetBlocks(0)
ERROR: FetchInputs() : 5908ca0cb9 mempool Tx prev not found 8aaf9795b1

Any help will be appreciated.

Thanks.

Finally I've managed to solve the problem.

I had reloaded the bootstrap.dat and added the nodes in the hyperstake.conf. Now the node syncs ok and starts staking...