[ANN][SLG] Sterlingcoin v1.7 | United Kingdom |

[westloin]

In your sterlingcoin.conf file        https://help.ableton.com/hc/en-us/articles/209070509-How-to-access-hidden-folders

AppData\Roaming\sterlingcoin\sterlingcoin.conf

I didn't have one so I created one and added the nodes but still not syncing and also thr wallet is unresponsive most of the time. I've got Win 8.1 and  wallet v1.5.1.1: Lite Edition

[1715030629]

1715030629

[1715030629]

1715030629

[Sterlingcoin]

In your sterlingcoin.conf file        https://help.ableton.com/hc/en-us/articles/209070509-How-to-access-hidden-folders

AppData\Roaming\sterlingcoin\sterlingcoin.conf

I didn't have one so I created one and added the nodes but still not syncing and also thr wallet is unresponsive most of the time. I've got Win 8.1 and  wallet v1.5.1.1: Lite Edition

The first seednode that is hardcoded into the wallet is online. Because it is hardcoded into the wallet, you should not even need the sterlingcoin.conf file or any addnodes to discover peers. Of course, I thank Rols for trying to help regardless.

Being that your wallet is unresponsive and you cannot apparently connect to any peers, I suspect something else is the culprit. If the Sterlingcoin wallet can't communicate with the seednode and other peers, something must be stopping it. I just now tested a Lite version on Windows and it already has 16 peers. You may benefit from looking into your network and firewall settings as it sounds like something is standing in the way of communication.

EDIT: On the seednode topic, the second seednode that is hardcoded into the existing wallets (seed2.sterlingcoin.org.uk, which seed2.sterlingcoin.org will resolve to also) will be online within days.

[Rols]

In your sterlingcoin.conf file        https://help.ableton.com/hc/en-us/articles/209070509-How-to-access-hidden-folders

AppData\Roaming\sterlingcoin\sterlingcoin.conf

I didn't have one so I created one and added the nodes but still not syncing and also thr wallet is unresponsive most of the time. I've got Win 8.1 and  wallet v1.5.1.1: Lite Edition

The first seednode that is hardcoded into the wallet is online. Because it is hardcoded into the wallet, you should not even need the sterlingcoin.conf file or any addnodes to discover peers. Of course, I thank Rols for trying to help regardless.

Being that your wallet is unresponsive and you cannot apparently connect to any peers, I suspect something else is the culprit. If the Sterlingcoin wallet can't communicate with the seednode and other peers, something must be stopping it. I just now tested a Lite version on Windows and it already has 16 peers. You may benefit from looking into your network and firewall settings as it sounds like something is standing in the way of communication.

EDIT: On the seednode topic, the second seednode that is hardcoded into the existing wallets (seed2.sterlingcoin.org.uk, which seed2.sterlingcoin.org will resolve to also) will be online within days.

I never have problems with syncing sterlingcoin from scratch. Sometimes it helps others  to get active peers. They atleast get faster syncing. The most likely culprit now wuld be your firewall that is stopping it from conecting to peers.

[mafia]

Hey sorry I think my last response came across incorrectly. My SterlingCoin is synced and working fine. But very frequently throughout the day it will take 20% of my CPU and if I look at the client settings it will frequently freeze but if i wait a while it will work again

I am surprised no one else is experiencing this on Windows OS

[Sterlingcoin]

So the community is aware, Matthew has today informed me via skype that he also has no objection to me, Steven, taking over Sterlingcoin and my intentions and plans to move it forward.

[Sterlingcoin]

Hey sorry I think my last response came across incorrectly. My SterlingCoin is synced and working fine. But very frequently throughout the day it will take 20% of my CPU and if I look at the client settings it will frequently freeze but if i wait a while it will work again

I am surprised no one else is experiencing this on Windows OS

You might be witnessing your wallet submitting or trying to submit PoS blocks. If this is interfering with your computing or being a nuisance too often, you could stake less frequently. At a bare minimum, you must stake for 12 hours every month to ensure your PoS reward meets annual expectations, though more often is recommended. You could lock your wallet so it is not staking and only unlock it to stake occasionally. Also, Sterlincoin does support the "staking=0" option in the sterlingcoin.conf file to disable staking. This option is probably less desirable because one would need to restart the wallet with "staking=1" or "staking=0" removed as staking will default to true, to start staking again. Forgetting to undo the change in the future might be a problem. I only mention it so people know the option exists.

Another thought, if your wallet consists of many small inputs, many faucet payments for example, dealing with the many inputs might be impeding performance. You might benefit from cleaning up those inputs into larger inputs. To do this and retain your existing addresses follow these steps. It might seem like a lot of steps but, walk it through first and I think you will see the logic is fairly simple... 1) close the wallet. 2) rename your 'real' wallet.dat file. I will use 'walletREAL.dat' for example. 3) launch the wallet. A new wallet.dat file will be created. 4) copy the receiving address in this 'temporary' wallet. 5) close the wallet again. 6) rename the 'temporary' wallet.dat to 'walletTEMP.dat' 7) rename 'walletREAL.dat' back to wallet.dat   8 ) launch the wallet again 9) send your balance to that temporary wallet address you copied in step 4. 10) wait for those transactions to confirm and while doing so, make a new receiving address and copy it. 11) close the wallet yet again. 12) rename the real wallet back to 'walletREAL.dat' and rename the temporary wallet to wallet.dat 13) launch the wallet yet again and now send the balance, in about 5k 'chunks' if you have a large balance, back to your real wallet using the new address you created in step 10. 14) close the wallet 15) rename the wallet.dat back to 'walletTEMP.dat' 16) rename walletREAL.dat back to wallet.dat 17) Finally, launch the wallet.

You could, if you have no problem switching to a new wallet with new addresses, follow a similar logic with fewer steps to move your coins to a completely new wallet. You could, though I would not recommend, use an exchange wallet as a temporary wallet but again, not recommended. Of course, retain your old wallet.dat file and any temporary wallet usued to be safe.

When doing either of these methods and moving your coins, you will reset the coin age of your coins. What this means is your coins will have less weight and that will translate to staking reward installments being received less frequently. But installments will be of a larger amount and still equal 5.5 % annual.

[westloin]

I've sent a small amount to bittrex and it successfully went through soon after.
Then I sent a big amount and still 8 hours later nothing arrived at bittrex. My wallet says Status: 110 confirmations

I can't work with my wallet. It's almost always in a 'Not Responding' status and it's only not frozen only for a few moments when staking the whole amount.
I select from the options most of the amount to reserve and not participate in staking and it suddenly unfreezes but unfortunately it's still trying to sync with the network
Always says (out of sync)
It says 4423 blocks remaining and it's stuck there. Yesterday I had the wallet opened for most of the day and it only went down from 4300 blocks remaining to 4200.
Then I closed the wallet and reopened it a minute later and it was back to block 4334. Closed and opened a few times since then and now I'm at 4423 blocks remaining.

I always had heavy cpu utilization since the latest wallet release when staking and my cpu would often throttle.
I always had my wallet staking and only had it occasionally closed for no more than a day until I've decided 2-3 weeks ago to stop staking and have my wallet closed.
At some point after my wallet start having a problem syncing with the network.

Firewall is not blocking the wallet btw. The wallet says 13 active connections with the network and just at this moment I noticed the remaining blocks are up to 4425 from 4423 it was 10 min ago.

[Sterlingcoin]

I've sent a small amount to bittrex and it successfully went through soon after.
Then I sent a big amount and still 8 hours later nothing arrived at bittrex. My wallet says Status: 110 confirmations

I can't work with my wallet. It's almost always in a 'Not Responding' status and it's only not frozen only for a few moments when staking the whole amount.
I select from the options most of the amount to reserve and not participate in staking and it suddenly unfreezes but unfortunately it's still trying to sync with the network
Always says (out of sync)
It says 4423 blocks remaining and it's stuck there. Yesterday I had the wallet opened for most of the day and it only went down from 4300 blocks remaining to 4200.
Then I closed the wallet and reopened it a minute later and it was back to block 4334. Closed and opened a few times since then and now I'm at 4423 blocks remaining.

I always had heavy cpu utilization since the latest wallet release when staking and my cpu would often throttle.
I always had my wallet staking and only had it occasionally closed for no more than a day until I've decided 2-3 weeks ago to stop staking and have my wallet closed.
At some point after my wallet start having a problem syncing with the network.

Firewall is not blocking the wallet btw. The wallet says 13 active connections with the network and just at this moment I noticed the remaining blocks are up to 4425 from 4423 it was 10 min ago.

This is quite the peculiar situation you have explained, westloin. I am sorry it is giving you these difficulties and sorry if I misunderstood the problem.

With 16 connections, syncing should certainly not be difficult. Let's do this if you agree, I will PM you and arrange to get a copy of your debug.log file. I will investigate it to see if I can find an indication of the problem.

Again, sorry your wallet is giving you problems. It does sound like something very odd is going on. I will gladly help you get to the bottom of it. Of course, we will resolve the Bittrex transaction issue as well.

[Rw13enlib88]

I've just sign up in livecoin and is the most user friendly cryptoexchange

we need to be there

this are the coinditions to be included

If you own, develop or officially represent a coin, you may implement your coin to our Exchange by two ways. The coins implemented by the first way are in priority.

    If your coin is based on bitcoin, implementation will cost 2 BTC. If your coin is based on any other technology, implementation will cost 2.5 BTC. You are to address support stuff and apply to implement a coin. Please provide the information about your coin listed below right away.
    The second way. Address our support and ask to add your coin to the vote section https://www.livecoin.net/voting/. It is free and there is no need in any data of the coin except for its name and trading symbol. After that you may ask your community to vote for your project or give paid votes by yourself (for more details see the vote section). Paid votes are not limited. The first coin in the voting list is taken under consideration to implement. The coin is implemented if it is technically available and a number of following conditions are met.


Provide the following data for your coin when applying for implementation.

    Link to official git of your node.
    Link to thread at bitcointalk or any similar forum or the link to your own forum, and the link to official site of coin as well.
    Link to blockchain that must operate thoroughly.
    Make sure your git contents technical guide requisite for node compilation and setting.


The coin's developer is obliged to report all technical issues with coin, node, block explorer, and all the forks already happened in time. Likewise, reports on up-going forks have to come in advance. Developer is responsible for the case of losing the funds after forks or technical / security issues with node.

After the first consideration of your application we will offer you to transfer payment to indicated account if your coin implementation is technically available. We will start to work on your coin the next workday after we receive the funds. The coins based on bitcoin are implemented within 2-4 workdays usually. The coins based on other technologies are being implemented for a little longer period; specific period depends on your node's documentation quality and your willingness to answer quickly our technicians’ questions.

[Sterlingcoin]

Happy Holidays, Sterlingcoiners! Please do enjoy your time with your loved ones this holiday season.

[STERLING SENTINEL]

Merry Christmas to everyone in the Sterlingcoin Community, most especially to Steven Saxton.


Sterling Sentinel

[Rw13enlib88]

Merry Christmas!!

[westloin]

Happy New Year to all!

[Rw13enlib88]

Happy New Year!!

[westloin]

Hi,
Any update on development?

[Sterlingcoin]

Hi,
Any update on development?

Hi westloin.

I am waiting on an upgrade to a VPS for the block explorer. The holidays caused a 'corporate' delay with that upgrade, but I expect that very soon, today hopefullly. I am eagerly awaiting the upgrade and will have the explorer online promptly after. I have already started on the custom styling to be used.

In regards to the wallet rebase, I am exploring the option of rebasing against upstream, namely boostcoin. I am in communication with other developers that may be able to help me get that done in a more timely fashion.

Also on my agenda is updating the website and OP to showcase currently available Sterlingcoin solutions, such as PoSWallet.com and Coin To Pay.

In regards to ChainWorks Industries, I will work with Crysx and get more seednodes operational. These will be doployed and hard coded into forthcoming wallets in a manner that, yes, CWI staff will have access to the seednodes but I will have exclusive access to the DNS zonefile that will cause wallets to resolve and point to them.

Also on the ChainWorks Industries front, I am pleased to announce, CWI staff has been and is in development of a multi-pool. This will be a fully-fledged exchange buying multi pool that will allow users to PoW mine other coins and get paid in Sterlingcoin. While I fully understand the Sterlingcoin community has been promised this in the past, and that promise failed, I have confirmed this will be completed mid-2017.

I am making every effort to ensure 2017 will be for Sterlingcoin and Sterlingcoiners, a happy new year.

[westloin]

Thank you for the update. With a dedicated new team hopefully 2017 will be the year for Sterlingcoin. Lets not drop the ball this time.

Also I'd like to thank you for helping me resolve the problem I had with my wallet. I transferred all my coins temporarily to Bittrex, uninstalled the wallet, made a fresh installation and transferred the coins to my new wallet. It's been a few days now without a problem. CPU usage is under 1%

[Sterlingcoin]

Thank you for the update. With a dedicated new team hopefully 2017 will be the year for Sterlingcoin. Lets not drop the ball this time.

Also I'd like to thank you for helping me resolve the problem I had with my wallet. I transferred all my coins temporarily to Bittrex, uninstalled the wallet, made a fresh installation and transferred the coins to my new wallet. It's been a few days now without a problem. CPU usage is under 1%

With dedicated people, and people that are ready to make the personal sacrifices needed, Time Square will be the only place to see a ball drop.

Glad to hear your wallet issue has been resolved. I was glad to help!

[oneoff]

Thanks for the news update. This year seems already to be very interesting!

I have proudly enjoyed my working coffee from this glorious mug since feb. 2015.


Happy new year!

[Sterlingcoin]

My apologies for the prolonged delay on the block explorer. The failure of the VPS provider to upgrade in a timely manner has forced me to find services elsewhere. The block explorer will be up after I secure a VPS meeting my requirements and budget. I certainly hope that will be completed and the block explorer will be live this week.