[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[Sy]

Current Richlist, NOT block finder list
http://pastebin.com/WkqQhQHU

The staggering is the number of nounces you compute before write everything into file, it depends on the ram available and thats all, you can choose any number you like and it will work unless you choose a number too high for the ram available, that's why 8096 is the limit, 8096 * 256kb = ~2gb

I've only used 512 to 2048 and trust me, i am mining fine.

[crowetic]

Current Richlist, NOT block finder list
http://pastebin.com/WkqQhQHU

The staggering is the number of nounces you compute before write everything into file, it depends on the ram available and thats all, you can choose any number you like and it will work unless you choose a number too high for the ram available, that's why 8096 is the limit, 8096 * 256kb = ~2gb

I've only used 512 to 2048 and trust me, i am mining fine.

woohoo, go me!

#33     BURST-79PK-DGC2-M4XP-HUAVB

[ReDPoiSoN]

Current Richlist, NOT block finder list
http://pastebin.com/WkqQhQHU

The staggering is the number of nounces you compute before write everything into file, it depends on the ram available and thats all, you can choose any number you like and it will work unless you choose a number too high for the ram available, that's why 8096 is the limit, 8096 * 256kb = ~2gb

I've only used 512 to 2048 and trust me, i am mining fine.

woohoo, go me!

#33     BURST-79PK-DGC2-M4XP-HUAVB

I'm the 7th and I was wasting about 50% of my space since launch.. 

[Wulfcastle]

Current Richlist, NOT block finder list
http://pastebin.com/WkqQhQHU

The staggering is the number of nounces you compute before write everything into file, it depends on the ram available and thats all, you can choose any number you like and it will work unless you choose a number too high for the ram available, that's why 8096 is the limit, 8096 * 256kb = ~2gb

I've only used 512 to 2048 and trust me, i am mining fine.

Rich List isn't fully currect. I own just over 410 000 Burst and my address isn't anywhere on the list : BURST-CKUG-2DLF-KNL6-EETXA

[Sy]

Current Richlist, NOT block finder list
http://pastebin.com/WkqQhQHU

The staggering is the number of nounces you compute before write everything into file, it depends on the ram available and thats all, you can choose any number you like and it will work unless you choose a number too high for the ram available, that's why 8096 is the limit, 8096 * 256kb = ~2gb

I've only used 512 to 2048 and trust me, i am mining fine.

Rich List isn't fully currect. I own just over 410 000 Burst and my address isn't anywhere on the list : BURST-CKUG-2DLF-KNL6-EETXA

Shit...lemme check.

{"guaranteedBalanceNQT":"0","balanceNQT":"41097000000000","effectiveBalanceNXT":0,"unconfirmedBalanceNQT":"41097000000000","forgedBalanceNQT":"0"}

Update:
Did you ever mine a block or buy in? Because if you havent mined any you would not be looked up...is there a public nxt block explorer i can setup for burst before i start parsing every transaction...

[crowetic]

Just so that everyone knows, whoever was following my issues with my server...


I didn't have any other crashes yesterday after adding pause to my batch...


Now, however, I have changed the x amount to 1500 on both miners as they are (or will be) pushing around 2.5 TB a piece...

So far so good... I am pretty sure that was the issue, but I still can't be 100%


I am now also moving the rest of my plotting onto a VM as to not interfere with anything on my important server.

Thank you everyone for your assistance!

[Sglasio]

in generate, what more important? gpu threads or ram in xmx (i mean java -Xmx2000m)

[shlsumy]

WTS

50k .19BTC

PM if interested!

[Wulfcastle]

Current Richlist, NOT block finder list
http://pastebin.com/WkqQhQHU

The staggering is the number of nounces you compute before write everything into file, it depends on the ram available and thats all, you can choose any number you like and it will work unless you choose a number too high for the ram available, that's why 8096 is the limit, 8096 * 256kb = ~2gb

I've only used 512 to 2048 and trust me, i am mining fine.

Rich List isn't fully currect. I own just over 410 000 Burst and my address isn't anywhere on the list : BURST-CKUG-2DLF-KNL6-EETXA

Shit...lemme check.

{"guaranteedBalanceNQT":"0","balanceNQT":"41097000000000","effectiveBalanceNXT":0,"unconfirmedBalanceNQT":"41097000000000","forgedBalanceNQT":"0"}

Update:
Did you ever mine a block or buy in? Because if you havent mined any you would not be looked up...is there a public nxt block explorer i can setup for burst before i start parsing every transaction...

Didn't mine anything so far, bought all my coins.

[Mraking]

Wts 70k
10k=0,035

[ReDPoiSoN]

Current Richlist, NOT block finder list
http://pastebin.com/WkqQhQHU

The staggering is the number of nounces you compute before write everything into file, it depends on the ram available and thats all, you can choose any number you like and it will work unless you choose a number too high for the ram available, that's why 8096 is the limit, 8096 * 256kb = ~2gb

I've only used 512 to 2048 and trust me, i am mining fine.

Rich List isn't fully currect. I own just over 410 000 Burst and my address isn't anywhere on the list : BURST-CKUG-2DLF-KNL6-EETXA

Shit...lemme check.

{"guaranteedBalanceNQT":"0","balanceNQT":"41097000000000","effectiveBalanceNXT":0,"unconfirmedBalanceNQT":"41097000000000","forgedBalanceNQT":"0"}

Update:
Did you ever mine a block or buy in? Because if you havent mined any you would not be looked up...is there a public nxt block explorer i can setup for burst before i start parsing every transaction...

Didn't mine anything so far, bought all my coins.

You have to make an outgoing transaction to save your public key in the blockchain! You can also buy a name for your wallet per 1 Burst! Look in the wallet homepage, near your wallet address you'll see "No name set": click here!

I quote the dev:

One more thing is you should make an outgoing transaction. Your full public key isn't saved into the blockchain until you do. Almost any type of transaction will suffice, send yourself 1 burst, or buy an alias, or set your account name.

Assuming this is you:
http://127.0.0.1:8125/burst?requestType=getAccountPublicKey&account=BURST-ZEN7-MS5U-L59L-5UK39
shows if your key is saved or not

EDIT:

Sorry, I've seen now you have already done this.. So don't know! Wait for someone more expert!! 

[tricass]

Just so that everyone knows, whoever was following my issues with my server...


I didn't have any other crashes yesterday after adding pause to my batch...


Now, however, I have changed the x amount to 1500 on both miners as they are (or will be) pushing around 2.5 TB a piece...

So far so good... I am pretty sure that was the issue, but I still can't be 100%


I am now also moving the rest of my plotting onto a VM as to not interfere with anything on my important server.

Thank you everyone for your assistance!

at 1350m for me on 2.1TB plot looking stable for me now. running for over half a day now which is a whole lot better than yesterday. so it does appear to be more ram required with larger plot sizes.

[Sglasio]

i can't download wallet((( Error

[ReDPoiSoN]

i can't download wallet((( Error

Go here:

https://github.com/BurstProject/burstcoin
https://github.com/BurstProject/pocminer

On the right side, click download zip!

[Sglasio]

i can't download wallet((( Error

Go here:

https://github.com/BurstProject/burstcoin
https://github.com/BurstProject/pocminer

On the right side, click download zip!

thx

[luxe]

...

@burstcoin: you are AWESOME!
@Wulfcastle: Thx for all that work, its so GOOD looking :-)

bouth of you should publish a burst address, so that we can donate!

This is my Burst address if anyone wants to donate for my work on the new Wallet UI, the new logo and the new OP. I've provided all my work free of charge and I don't ask for bounties, because improving BURST is a benefit to me as I see great potential for it. Donations are still welcome though - BURST-CKUG-2DLF-KNL6-EETXA

5k from me incomming ... thx again!

[BChydro]

Just so that everyone knows, whoever was following my issues with my server...


I didn't have any other crashes yesterday after adding pause to my batch...


Now, however, I have changed the x amount to 1500 on both miners as they are (or will be) pushing around 2.5 TB a piece...

So far so good... I am pretty sure that was the issue, but I still can't be 100%


I am now also moving the rest of my plotting onto a VM as to not interfere with anything on my important server.

Thank you everyone for your assistance!

at 1350m for me on 2.1TB plot looking stable for me now. running for over half a day now which is a whole lot better than yesterday. so it does appear to be more ram required with larger plot sizes.

I woke up to find my miner working on a 3.2 TB plot had closed itself. It was running on the default 750m. I guess I need to boost it up a bit

...

@burstcoin: you are AWESOME!
@Wulfcastle: Thx for all that work, its so GOOD looking :-)

bouth of you should publish a burst address, so that we can donate!

This is my Burst address if anyone wants to donate for my work on the new Wallet UI, the new logo and the new OP. I've provided all my work free of charge and I don't ask for bounties, because improving BURST is a benefit to me as I see great potential for it. Donations are still welcome though - BURST-CKUG-2DLF-KNL6-EETXA

2.5k inbound from me. Thanks!

[crowetic]

Wulfcastle, I will be donating to you as well...


Also, anyone interested in buying BURST directly for BTC, hit me up, I am willing to sell up to 120k.

PM for details!!!

[crowetic]

...

@burstcoin: you are AWESOME!
@Wulfcastle: Thx for all that work, its so GOOD looking :-)

bouth of you should publish a burst address, so that we can donate!

This is my Burst address if anyone wants to donate for my work on the new Wallet UI, the new logo and the new OP. I've provided all my work free of charge and I don't ask for bounties, because improving BURST is a benefit to me as I see great potential for it. Donations are still welcome though - BURST-CKUG-2DLF-KNL6-EETXA

5k from me incomming ... thx again!

8/19/2014 09:33:58      5'000 + 5   BURST-CKUG-2DLF-KNL6-EETXA

5k from me as well.

[Wings1987]

%

[/quote]I woke up to find my miner working on a 3.2 TB plot had closed itself. It was running on the default 750m. I guess I need to boost it up a bit

I have been having this issue also since the wallet upgrade. 2 miner instances. one is on an external drive (usb 3.0) The miner for the internal drive is stable but the external has to be restarted once or twice a day. Plot creation was still going on for the external.

Anyone else having this issue?


I stopped plot creating and I am letting it run to see if that could be the issue.