[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[doge94]

burstmp.com

Announcement, we are changing our mining strategy. This will increase profitability and lower variance. Let me know if you have any problems.

Son, turn off the hidden coin crap.
Miners like to see what they're mining, so they know you're not scamming them.
You also need to customize your NOMP install at least a bit, c'mon here.  And you really need to add additional protocols.
Burstmultipool.com is already beating BTC in terms of SHA profitability.

I like to think profitability is more important than revealing what we are mining. Also burstmultipool.com is slower more cluttered and harder to use than burstmp.com. I do not want to get into an argument but I think you should get your own site working 100% (broken links, 0 in stat boxes, consistent theme) before criticizing my site.

[1714679086]

1714679086

[1714679086]

1714679086

[unsoindovo]

burstmp.com

Announcement, we are changing our mining strategy. This will increase profitability and lower variance. Let me know if you have any problems.

Son, turn off the hidden coin crap.
Miners like to see what they're mining, so they know you're not scamming them.
You also need to customize your NOMP install at least a bit, c'mon here.  And you really need to add additional protocols.
Burstmultipool.com is already beating BTC in terms of SHA profitability.

already asked and i ask again!

turn off the hidden coin crap.

[Prelude]

Come on miners! Get your SHA rigs pointed at stratum+tcp://pool.burstmultipool.com:5555

Our profitability stats for the current shift update on the main page every 10 minutes! We need more scrypt miners to start solving some blocks, but our SHA miners are currently nearly 1/3 more profitable than BTC directly.

Why settle for a generic NOMP rip?

Just pointed 1TH at the SHA256 port, and will later switch 150MH at the scrypt port. Any eta on the stats page? Hate not seeing what my workers are doing.

[Razerglass]

burstmp.com

Announcement, we are changing our mining strategy. This will increase profitability and lower variance. Let me know if you have any problems.

Son, turn off the hidden coin crap.
Miners like to see what they're mining, so they know you're not scamming them.
You also need to customize your NOMP install at least a bit, c'mon here.  And you really need to add additional protocols.
Burstmultipool.com is already beating BTC in terms of SHA profitability.

I like to think profitability is more important than revealing what we are mining. Also burstmultipool.com is slower more cluttered and harder to use than burstmp.com. I do not want to get into an argument but I think you should get your own site working 100% (broken links, 0 in stat boxes, consistent theme) before criticizing my site.

payout was fair on first payout.  if payout is good today defiantly will be staying here.

[FruitPolo]

When I start the run_generate.bat file with this line:
C:\Windows\SysWOW64\java -Xmx1024m -cp pocminer.jar;lib/*;lib/akka/*;lib/jetty/* pocminer.POCMiner generate *my address* 56000 7168000 2048 6
The PC uses 100% of the CPU and only 2.4GB of 16GB RAM , is it normal?

Yep, that's completely normal. Generating plots is very CPU intensive and doesn't use a massive amount of RAM at 2048 spread

[unsoindovo]

Come on miners! Get your SHA rigs pointed at stratum+tcp://pool.burstmultipool.com:5555

Our profitability stats for the current shift update on the main page every 10 minutes! We need more scrypt miners to start solving some blocks, but our SHA miners are currently nearly 1/3 more profitable than BTC directly.

Why settle for a generic NOMP rip?

Just pointed 1TH at the SHA256 port, and will later switch 150MH at the scrypt port. Any eta on the stats page? Hate not seeing what my workers are doing.

HEY DEV!!!
the question is correct.
Can you correct the stats page?

PLZ if you can not now give us the solution now, give us ETA to do it!!!!

thank you!

[doge94]

burstmp.com

Announcement, we are changing our mining strategy. This will increase profitability and lower variance. Let me know if you have any problems.

Son, turn off the hidden coin crap.
Miners like to see what they're mining, so they know you're not scamming them.
You also need to customize your NOMP install at least a bit, c'mon here.  And you really need to add additional protocols.
Burstmultipool.com is already beating BTC in terms of SHA profitability.

already asked and i ask again!

turn off the hidden coin crap.

We've decided to only show the coin we are currently mining (which is Viacoin).
http://burstmp.com/workers

[Razerglass]

burstmp.com

Announcement, we are changing our mining strategy. This will increase profitability and lower variance. Let me know if you have any problems.

Son, turn off the hidden coin crap.
Miners like to see what they're mining, so they know you're not scamming them.
You also need to customize your NOMP install at least a bit, c'mon here.  And you really need to add additional protocols.
Burstmultipool.com is already beating BTC in terms of SHA profitability.

already asked and i ask again!

turn off the hidden coin crap.

We've decided to only show the coin we are currently mining (which is Viacoin).
http://burstmp.com/workers

hey nice. steady mining with this pool since it started. look forward to seeing my payout today

the multipool operators shouldnt be fighting were all trying to support burst are we not. lets not let pride get in the way.

browsing through http://burstmultipool.com/ i do notice about half the links are dead.

[ltcnim]

looks like the first one is the real read data, and seconds one is calculated nonces (bytes * 1024 * noncesize)

i have one suspect why dcct-miner has bad deadline, i will post after testing it

did it work out?

[coinits]

I ran the tool at https://bchain.info/BURST/tools/overlap and this was the result:

3104997 nonces overlap (758 GB)
6744997 nonces total (1646 GB)
6742 disk seeks per Scoop (53.9 seconds @ 8ms)

I don't know how I did this because I thought that my math was good.

Anyway it says I have 1646 GB total on a drive that had 888 GB free when I started generating plots..

WTF does that mean? I have other drives that are reporting overlaps too.

Should I wipe it out and start new?

Thanks

Signed

The Retard.

[Razerglass]

http://burstmp.com/workers

im getting stale shares in a few cgminer instances all the sudden

[crowetic]

Looking for miners (ASIC ones especially!)
http://burstmultipool.com!
scrypt: stratum+tcp://pool.burstmultipool.com:3333
sha: stratum+tcp://pool.burstmultipool.com:5555
x11: stratum+tcp://pool.burstmultipool.com:4444
Keccak: stratum+tcp://pool.burstmultipool.com:6666
scrypt-n: stratum+tcp://pool.burstmultipool.com:2222

Choosing a coin is kinda tough if you don't already know what algo it uses.
It would be nice to have the site updated to list the algo next to the names of the coins.

Also, when clicking on a coin (myriadcoin), it states:
Username: your myriadcoin wallet address

...I assume this means your BurstCoin wallet address and not a wallet for that specific coin, right? (might want to update that as well)
or are those for direct mining those coins?

I'm pretty sure that the front end is a copy/paste of another pool, which is why parts of it really don't make sense. Hopefully he'll get it cleaned up and customized for BURST, but in the mean time, don't try to pick a coin, just pick one of the algos he lists, the pool will automatically mine the best coin for that algo.

ty, fixed the issue where it was saying to use the specific coin wallets as worker names

Awesome! Just threw another 600GH @ SHA your SHA pool. The "Pools" page reflects the new hashing power I added, but my individual address is only showing ~400GH... It's been 10+min since I added them, but I'll wait a little longer to see if it reflects properly.

Edit: Hashing power is now reporting properly

Yea, and if the profitability it reports is correct, then it's better than what I was getting on nicehash, very nice.

Definitely needs a little bit of tweaking with stats, and the few broken links, but overall very nice, and I'm happy with it. Can't wait to see my first payout! Thanks!

[paradigmflux]

Come on miners! Get your SHA rigs pointed at stratum+tcp://pool.burstmultipool.com:5555

Our profitability stats for the current shift update on the main page every 10 minutes! We need more scrypt miners to start solving some blocks, but our SHA miners are currently nearly 1/3 more profitable than BTC directly.

Why settle for a generic NOMP rip?

Just pointed 1TH at the SHA256 port, and will later switch 150MH at the scrypt port. Any eta on the stats page? Hate not seeing what my workers are doing.

Hey man,

The 'My Stats' page is a bit borked right now in terms of showing you the separate coins.  It is still however displaying your historical hashrates correctly, as well as your estimated number of BURST at next payout.
The entire server is under a constant DDOS attack in excess of 5 GB, thankfully our mitigation service is working well.

A shortcut that can be used to access your miners stats is: http://burstmultipool.com/miner/<WALLET>
so for example:
http://burstmultipool.com/miner/BURST-79PK-DGC2-M4XP-HUAVB


I will get the coins all displaying on it properly later tonight.

[maqa71]

I ran the tool at https://bchain.info/BURST/tools/overlap and this was the result:

3104997 nonces overlap (758 GB)
6744997 nonces total (1646 GB)
6742 disk seeks per Scoop (53.9 seconds @ 8ms)

I don't know how I did this because I thought that my math was good.

Anyway it says I have 1646 GB total on a drive that had 888 GB free when I started generating plots..

WTF does that mean? I have other drives that are reporting overlaps too.

Should I wipe it out and start new?

Thanks

Signed

The Retard.

They are beeing added up: 758 + 888 = 1646
Whats shown is correct, no need to start over.

[coinits]

I ran the tool at https://bchain.info/BURST/tools/overlap and this was the result:

3104997 nonces overlap (758 GB)
6744997 nonces total (1646 GB)
6742 disk seeks per Scoop (53.9 seconds @ 8ms)

I don't know how I did this because I thought that my math was good.

Anyway it says I have 1646 GB total on a drive that had 888 GB free when I started generating plots..

WTF does that mean? I have other drives that are reporting overlaps too.

Should I wipe it out and start new?

Thanks

Signed

The Retard.

They are beeing added up: 758 + 888 = 1646
Whats shown is correct, no need to start over.

Well that is a relief but I do not understand the math. Before I started generating plots I only had 888 GB free on the drive. I had to reboot my computers while plotting so have multiple files. So why the 1646 GB total for 888 GB of space? I am confused.

[procrastinationtm]

http://burstmp.com/workers

im getting stale shares in a few cgminer instances all the sudden

As part of our new mining strategies, stale shares may be increased (but will likely be outstripped by profitability increase). We are still tweaking it so the high reject count should not last long.

EDIT: Apparently we're receiving some DDOS as well...

[varunsin]

unable to start my miner

any help guys, I am running Centos 7 and Java 1.7

[Razerglass]

http://burstmp.com/workers

im getting stale shares in a few cgminer instances all the sudden

As part of our new mining strategies, stale shares may be increased (but will likely be outstripped by profitability increase). We are still tweaking it so the high reject count should not last long.

wonderfull glad to hear yall are working on it. 

[THeZoiD]

WTF ive been mining for 24 hours on cryptoport with 1 tb and im popping share like there are going out of style and still cant see my address in the list and still no payment

 

[go6ooo1212]

Is it a way to restore your progress when you restart the run_generate.bat