[ANN] NeosCoin [NEOS] - with Arbitrush, Multi-Algo, In-wallet trading & More

[twoturtles]

though a bit early I added a x11 pool too and msged the op.. also available at our pools mainpage and twitter (see sig)

Pool added to neoscoin.com thanks a lot man =)

no prob mate, just hope the diff things will be sorted out soon and we reach block 1000 for full rewards

https://github.com/neoscoin/cpuminer-blake256 so you can add your blake pool =)

[ocminer]

though a bit early I added a x11 pool too and msged the op.. also available at our pools mainpage and twitter (see sig)

Pool added to neoscoin.com thanks a lot man =)

no prob mate, just hope the diff things will be sorted out soon and we reach block 1000 for full rewards

https://github.com/neoscoin/cpuminer-blake256 so you can add your blake pool =)

If this is the version from BlueDragon747 it does not support stratum unfortunately :-(

[twoturtles]

though a bit early I added a x11 pool too and msged the op.. also available at our pools mainpage and twitter (see sig)

Pool added to neoscoin.com thanks a lot man =)

no prob mate, just hope the diff things will be sorted out soon and we reach block 1000 for full rewards

https://github.com/neoscoin/cpuminer-blake256 so you can add your blake pool =)

If this is the version from BlueDragon747 it does not support stratum unfortunately :-(

phark (our pool master) sent this to me to put on the git.  Give it a spin and let me know.

[twoturtles]

Update: the diff adjusted on sha256:

 "difficulty" : 6621.84435303,
    "difficulty_sha256d" : 16276755.74478164,
    "difficulty_x11" : 29.08944632,
    "difficulty_blake" : 6621.84435303,

What looks to have happened is the diff on x11 and blake got driven up and left there.  We're on block 419 now.  However, this is still going to be discussed when the other devs wake up.

     Regards,

syntaks

[TheCoinFinder]

Update from us - There was an issue with allocation of blocks - as this coin's block hash uses the "scrypt encoding" of the block hash, rather than the (more standard) block hash for block referencing.

We have updated both our X11 and Blake pool now to handle this.

[twoturtles]

Update from us - There was an issue with allocation of blocks - as this coin's block hash uses the "scrypt encoding" of the block hash, rather than the (more standard) block hash for block referencing.

We have updated both our X11 and Blake pool now to handle this.

Right on man!  Thanks a lot for that.

     Regards,

syntaks

[provenceday]

Message from Bittrex:
    Bittrex will be hosting the NeosCoin ICO. As a reminder, we are providing as escrow for the development team. We are not endorsing this coin or any others on our exchange. Please do your own research before trading. Below are the terms of the ICO.
    
    * The ICO will run for 21 days starting August 19th, 2014
    * We will review the walet before initially adding it.
    * We will hold all Premine Coins - 1,050,000
            * 250,000 coins offered @ 0.00010000
            * 800,000 coins offered @ 0.00012500
    * Once the ICO is over we will verify there is a:
            * working wallet
            * block explorer
            * trading integration inside wallet
    * If success conditions are met, we will destroy all remaining coins.
    * If success conditions are NOT met, we will buy back all outstanding coins at the ICO price
    * We will hold onto the funds in escrow for 3 days - at which time, we will release the funds.
    * No sales of the coin will be allowed until after the ICO ends
    * ALL SALES ARE FINAL AND THERE WILL BE NO REFUNDS - except if the success criteria isn't met.



     Best regards,

The Neos Team


Wallet now opened for withdrawal/deposit - Escrow period started

what does this mean?

will dev buy back some coins?

[child_harold]

Message from Bittrex:
    Bittrex will be hosting the NeosCoin ICO. As a reminder, we are providing as escrow for the development team. We are not endorsing this coin or any others on our exchange. Please do your own research before trading. Below are the terms of the ICO.
    
    * The ICO will run for 21 days starting August 19th, 2014
    * We will review the walet before initially adding it.
    * We will hold all Premine Coins - 1,050,000
            * 250,000 coins offered @ 0.00010000
            * 800,000 coins offered @ 0.00012500
    * Once the ICO is over we will verify there is a:
            * working wallet
            * block explorer
            * trading integration inside wallet
    * If success conditions are met, we will destroy all remaining coins.
    * If success conditions are NOT met, we will buy back all outstanding coins at the ICO price
    * We will hold onto the funds in escrow for 3 days - at which time, we will release the funds.
    * No sales of the coin will be allowed until after the ICO ends
    * ALL SALES ARE FINAL AND THERE WILL BE NO REFUNDS - except if the success criteria isn't met.



     Best regards,

The Neos Team


Wallet now opened for withdrawal/deposit - Escrow period started

what does this mean?

will dev buy back some coins?

this question has already been addressed. In short - yes.

[twoturtles]

Hey folks,

     To make things a bit more streamlined, I've set up http://bugs.neoscoin.com - feel free if you find any bugs or issues to submit them there and we'll take care of them.

     Regards,

syntaks

[Mrboot]

Hey folks,

     To make things a bit more streamlined, I've set up http://bugs.neoscoin.com - feel free if you find any bugs or issues to submit them there and we'll take care of them.

     Regards,

syntaks

Awesome idea syntaks, like the way you 3 handle support so far.

[DiCE1904]

This sounds like php is ignoring the specification to use ./php.ini which explicitly tells php to load the runtime.  Did you modify the setup script at all by chance?  Did you move anything outside of the package directory or just download and run it as-is?  We can get this sorted, it's straightforward.  A few caveats of this release are the inability to really customize the config the way you'd like which is something we had planned on including.  This will be in the next release but for now when these issues arise we're tackling them one by one.

     Regards,

syntaks
[/quote]


I just downloaded and ran As is. Thanks for working with me on figuring this out

[twoturtles]

This sounds like php is ignoring the specification to use ./php.ini which explicitly tells php to load the runtime.  Did you modify the setup script at all by chance?  Did you move anything outside of the package directory or just download and run it as-is?  We can get this sorted, it's straightforward.  A few caveats of this release are the inability to really customize the config the way you'd like which is something we had planned on including.  This will be in the next release but for now when these issues arise we're tackling them one by one.

     Regards,

syntaks

I just downloaded and ran As is. Thanks for working with me on figuring this out
[/quote]

Well we have two options here for a fix right now:

1.  I can teamview/remote into your machine and fix it (or SSH if you have it set up)
or
2.  copy ext/ZendGuardLoader.so into /usr/lib/php/extensions/no-debug-non-zts-20121212/ext/

and then try again.  Either way let me know and we'll move forward and get you situated.

      Best regards,

syntaks

[child_harold]

This sounds like php is ignoring the specification to use ./php.ini which explicitly tells php to load the runtime.  Did you modify the setup script at all by chance?  Did you move anything outside of the package directory or just download and run it as-is?  We can get this sorted, it's straightforward.  A few caveats of this release are the inability to really customize the config the way you'd like which is something we had planned on including.  This will be in the next release but for now when these issues arise we're tackling them one by one.

     Regards,

syntaks

I just downloaded and ran As is. Thanks for working with me on figuring this out

Well we have two options here for a fix right now:

1.  I can teamview/remote into your machine and fix it (or SSH if you have it set up)
or
2.  copy ext/ZendGuardLoader.so into /usr/lib/php/extensions/no-debug-non-zts-20121212/ext/

and then try again.  Either way let me know and we'll move forward and get you situated.

      Best regards,

syntaks
[/quote]

Awesome support!

[child_harold]

Trading volume slowly increasing. Now creeped onto page 1 of Trex with 15BTC Vol / 24hrs. Expecting this trend to continue.

[becalmerill]

Update from us - There was an issue with allocation of blocks - as this coin's block hash uses the "scrypt encoding" of the block hash, rather than the (more standard) block hash for block referencing.

We have updated both our X11 and Blake pool now to handle this.

I solved block 346 264.  Can you explain when the payouts will occur?  I sent an email but I have not received a response.  When I enter my address on the Payout Information page nothing comes up.  In fact the same happens when I enter any of the addresses that have solved blocks.

edit: This is referencing Hashharder.com's Neos pool.

[becalmerill]

Is anyone hosting a block explorer?  I am at work and I can't seem to find one.  I can't install the wallet on my machine here just to navigate the blockchain.

[twoturtles]

Is anyone hosting a block explorer?  I am at work and I can't seem to find one.  I can't install the wallet on my machine here just to navigate the blockchain.

http://explorer.neoscoin.com

[becalmerill]

Is anyone hosting a block explorer?  I am at work and I can't seem to find one.  I can't install the wallet on my machine here just to navigate the blockchain.

http://explorer.neoscoin.com

Awesome, now that's customer service.  (maybe want to put a link up on the neoscoin.com page?)

[huangwin]

ANY PLAN FOR NOW?OR ROADMAP?

[DiCE1904]

This sounds like php is ignoring the specification to use ./php.ini which explicitly tells php to load the runtime.  Did you modify the setup script at all by chance?  Did you move anything outside of the package directory or just download and run it as-is?  We can get this sorted, it's straightforward.  A few caveats of this release are the inability to really customize the config the way you'd like which is something we had planned on including.  This will be in the next release but for now when these issues arise we're tackling them one by one.

     Regards,

syntaks

I just downloaded and ran As is. Thanks for working with me on figuring this out

Well we have two options here for a fix right now:

1.  I can teamview/remote into your machine and fix it (or SSH if you have it set up)
or
2.  copy ext/ZendGuardLoader.so into /usr/lib/php/extensions/no-debug-non-zts-20121212/ext/

and then try again.  Either way let me know and we'll move forward and get you situated.

      Best regards,

syntaks

Awesome support!
[/quote]

Your telln me. Had TwoTurtles on TV to help me on 10.10.
After watching him man handle the terminal to get it working it put ALOT more respect and confidence in this project.

Thanks again