[∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved!

[tokona44]

A number of you are trying to mine here or are using this pool as backup with an invalid login username. Please check your credentials and confirm you are using a valid bitcoin address as your username and haven't added hidden spaces, missing last characters or otherwise.

hope mine is alright 1MaNim384asKXo7PVuGJ2hiNNnHryURNVd

[-ck]

A number of you are trying to mine here or are using this pool as backup with an invalid login username. Please check your credentials and confirm you are using a valid bitcoin address as your username and haven't added hidden spaces, missing last characters or otherwise.

hope mine is alright 1MaNim384asKXo7PVuGJ2hiNNnHryURNVd

If hashrate is showing up in your userstats then you're fine, and yours is.

[tokona44]

A number of you are trying to mine here or are using this pool as backup with an invalid login username. Please check your credentials and confirm you are using a valid bitcoin address as your username and haven't added hidden spaces, missing last characters or otherwise.

hope mine is alright 1MaNim384asKXo7PVuGJ2hiNNnHryURNVd

If hashrate is showing up in your userstats then you're fine, and yours is.

ohh thanks ck

[buckeyez]

thank you -ck for your help and pool.

https://www.blocktrail.com/BTC/tx/14c87044833a0e8e7c353ef3f368c43ea00d3d469bc197f033ba63a8422addfe

not much but got to get my return on my investment.

[-ck]

thank you -ck for your help and pool.

https://www.blocktrail.com/BTC/tx/14c87044833a0e8e7c353ef3f368c43ea00d3d469bc197f033ba63a8422addfe

not much but got to get my return on my investment.

No, it is quite generous donation indeed and most appreciated, thanks!

[willi9974]

Hello CK,

have the USA Pool a Problem?
My fix Nicehash order with 1PHs goes always canceld, by nicehash...
I try now the german DE Pool

Greetings
Willi

Update:
The DE Pool ist stabl and the 1PHs Rental works..

{"hashrate1m": "1.12P", "hashrate5m": "950T", "hashrate1hr": "254T", "hashrate1d": "13.6T", "hashrate7d": "1.97T", "lastupdate": 1454397749, "shares": 277366380, "bestshare": 1751075839.882755, "bestever": 1751075839}

[chillfactr]

What is the best way to set up my network for best communications to -ck pool? right now i have around 20 S4's and 4 SP30's on a 24 port switch
my speed is 130Mb down and 5Mb up.  is it best to have them all going out? or setup a node?

[willi9974]

and a other question to the new stats.

it is possible to insert a "new line" after each worker, so it could better read...

Code:

{"hashrate1m": "1.06P", "hashrate5m": "1.06P", "hashrate1hr": "495T", "hashrate1d": "109T", "hashrate7d": "250T", "lastupdate": 1454399009, "workers": 6, "shares": 83851550250, "bestshare": 8932604530.6144924, "bestever": 334417443951, "worker": [{"hashrate1m": "0", "hashrate5m": "0", "hashrate1hr": "0", "hashrate1d": "59.3T", "hashrate7d": "109T", "lastupdate": 1454399009, "shares": 24206665784, "bestshare": 8932604530.6144924, "bestever": 24745111018, "workername": "1Q8VghUJkNeFnaKy553b9buUWKxFYL579G_bitcoinlotto2"}, {"hashrate1m": "0", "hashrate5m": "0", "hashrate1hr": "0", "hashrate1d": "20.8T", "hashrate7d": "129T", "lastupdate": 1454399009, "shares": 40342440925, "bestshare": 373597880.047912, "bestever": 334417443951, "workername": "1Q8VghUJkNeFnaKy553b9buUWKxFYL579G_bitcoinlotto1"}, {"hashrate1m": "1.06P", "hashrate5m": "1.06P", "hashrate1hr": "495T", "hashrate1d": "28.9T", "hashrate7d": "4.19T", "lastupdate": 1454399009, "shares": 591441012, "bestshare": 1751075839.882755, "bestever": 1751075839, "workername": "1Q8VghUJkNeFnaKy553b9buUWKxFYL579G_megalotto"}]}

new line

Code:

{"hashrate1m": "1.06P", "hashrate5m": "1.06P", "hashrate1hr": "495T", "hashrate1d": "109T", "hashrate7d": "250T", "lastupdate": 1454399009, "workers": 6, "shares": 83851550250, "bestshare": 8932604530.6144924, "bestever": 334417443951, 
"worker": 
{"hashrate1m": "0", "hashrate5m": "0", "hashrate1hr": "0", "hashrate1d": "59.3T", "hashrate7d": "109T", "lastupdate": 1454399009, "shares": 24206665784, "bestshare": 8932604530.6144924, "bestever": 24745111018, "workername": "1Q8VghUJkNeFnaKy553b9buUWKxFYL579G_bitcoinlotto2"}, 
{"hashrate1m": "0", "hashrate5m": "0", "hashrate1hr": "0", "hashrate1d": "20.8T", "hashrate7d": "129T", "lastupdate": 1454399009, "shares": 40342440925, "bestshare": 373597880.047912, "bestever": 334417443951, "workername": "1Q8VghUJkNeFnaKy553b9buUWKxFYL579G_bitcoinlotto1"}, 
{"hashrate1m": "1.06P", "hashrate5m": "1.06P", "hashrate1hr": "495T", "hashrate1d": "28.9T", "hashrate7d": "4.19T", "lastupdate": 1454399009, "shares": 591441012, "bestshare": 1751075839.882755, "bestever": 1751075839, "workername": "1Q8VghUJkNeFnaKy553b9buUWKxFYL579G_megalotto"}]}

[-ck]

Hello CK,

have the USA Pool a Problem?
My fix Nicehash order with 1PHs goes always canceld, by nicehash...
I try now the german DE Pool

Greetings
Willi

Update:
The DE Pool ist stabl and the 1PHs Rental works..

{"hashrate1m": "1.12P", "hashrate5m": "950T", "hashrate1hr": "254T", "hashrate1d": "13.6T", "hashrate7d": "1.97T", "lastupdate": 1454397749, "shares": 277366380, "bestshare": 1751075839.882755, "bestever": 1751075839}

Read website. It says what for incompatible rentals to use port 3334. The main pool has an extra layer of DDoS protection.

[-ck]

and a other question to the new stats.

it is possible to insert a "new line" after each worker, so it could better read...

Code:

{"hashrate1m": "1.06P", "hashrate5m": "1.06P", "hashrate1hr": "495T", "hashrate1d": "109T", "hashrate7d": "250T", "lastupdate": 1454399009, "workers": 6, "shares": 83851550250, "bestshare": 8932604530.6144924, "bestever": 334417443951, "worker": [{"hashrate1m": "0", "hashrate5m": "0", "hashrate1hr": "0", "hashrate1d": "59.3T", "hashrate7d": "109T", "lastupdate": 1454399009, "shares": 24206665784, "bestshare": 8932604530.6144924, "bestever": 24745111018, "workername": "1Q8VghUJkNeFnaKy553b9buUWKxFYL579G_bitcoinlotto2"}, {"hashrate1m": "0", "hashrate5m": "0", "hashrate1hr": "0", "hashrate1d": "20.8T", "hashrate7d": "129T", "lastupdate": 1454399009, "shares": 40342440925, "bestshare": 373597880.047912, "bestever": 334417443951, "workername": "1Q8VghUJkNeFnaKy553b9buUWKxFYL579G_bitcoinlotto1"}, {"hashrate1m": "1.06P", "hashrate5m": "1.06P", "hashrate1hr": "495T", "hashrate1d": "28.9T", "hashrate7d": "4.19T", "lastupdate": 1454399009, "shares": 591441012, "bestshare": 1751075839.882755, "bestever": 1751075839, "workername": "1Q8VghUJkNeFnaKy553b9buUWKxFYL579G_megalotto"}]}

new line

Code:

{"hashrate1m": "1.06P", "hashrate5m": "1.06P", "hashrate1hr": "495T", "hashrate1d": "109T", "hashrate7d": "250T", "lastupdate": 1454399009, "workers": 6, "shares": 83851550250, "bestshare": 8932604530.6144924, "bestever": 334417443951, 
"worker": 
{"hashrate1m": "0", "hashrate5m": "0", "hashrate1hr": "0", "hashrate1d": "59.3T", "hashrate7d": "109T", "lastupdate": 1454399009, "shares": 24206665784, "bestshare": 8932604530.6144924, "bestever": 24745111018, "workername": "1Q8VghUJkNeFnaKy553b9buUWKxFYL579G_bitcoinlotto2"}, 
{"hashrate1m": "0", "hashrate5m": "0", "hashrate1hr": "0", "hashrate1d": "20.8T", "hashrate7d": "129T", "lastupdate": 1454399009, "shares": 40342440925, "bestshare": 373597880.047912, "bestever": 334417443951, "workername": "1Q8VghUJkNeFnaKy553b9buUWKxFYL579G_bitcoinlotto1"}, 
{"hashrate1m": "1.06P", "hashrate5m": "1.06P", "hashrate1hr": "495T", "hashrate1d": "28.9T", "hashrate7d": "4.19T", "lastupdate": 1454399009, "shares": 591441012, "bestshare": 1751075839.882755, "bestever": 1751075839, "workername": "1Q8VghUJkNeFnaKy553b9buUWKxFYL579G_megalotto"}]}

No. This site returns valid json, not fancy web stats.

[willi9974]

Thanks for the fast answer CK...

[kano]

What is the best way to set up my network for best communications to -ck pool? right now i have around 20 S4's and 4 SP30's on a 24 port switch
my speed is 130Mb down and 5Mb up.  is it best to have them all going out? or setup a node?

To minimise I/O use a ckproxy -p ...

[chiguireitor]

To minimise I/O use a ckproxy -p ...

Is that "ckproxy" the same as ckpool from here?

[-ck]

To minimise I/O use a ckproxy -p ...

Is that "ckproxy" the same as ckpool from here?

Wrong link. That person forked a copy of it... Otherwise, yes, the thread link has been in my sig for ages.

https://bitbucket.org/ckolivas/ckpool

[chiguireitor]

To minimise I/O use a ckproxy -p ...

Is that "ckproxy" the same as ckpool from here?

Wrong link. That person forked a copy of it... Otherwise, yes, the thread link has been in my sig for ages.

https://bitbucket.org/ckolivas/ckpool

Talk about selective blindness.... from the noise of the signatures i was actively ignoring sigs and didn't see that info... gonna test your proxy.

[WBF1]

@-ck will you ever run a solo bitcoin classic pool? maybe on a different port? just wondering...

Also, I think there are connection problems for the main pool? DE pool works fine (7:23pm EST, 2/2/2016)

[-ck]

@-ck will you ever run a solo bitcoin classic pool? maybe on a different port? just wondering...

Also, I think there are connection problems for the main pool? DE pool works fine (7:23pm EST, 2/2/2016)

Not unless classic usurps mainline.

No problems at main pool that I can see - usual problems are incomplete stratum implementations by rental services rendered non-working on the main pool due to it being behind an extra layer of DDoS protection - try port 3334 which is less protected.

[WBF1]

@-ck will you ever run a solo bitcoin classic pool? maybe on a different port? just wondering...

Also, I think there are connection problems for the main pool? DE pool works fine (7:23pm EST, 2/2/2016)

Not unless classic usurps mainline.

No problems at main pool that I can see - usual problems are incomplete stratum implementations by rental services rendered non-working on the main pool due to it being behind an extra layer of DDoS protection - try port 3334 which is less protected.

good to know re: classic

re: pool problems... it says "Failed authorization " but I literally haven't changed a thing. Still [address].[worker] yes? I get same result on 3334 and 3333

[-ck]

re: pool problems... it says "Failed authorization " but I literally haven't changed a thing. Still [address].[worker] yes? I get same result on 3334 and 3333

Sure you haven't added a space or something in your username in your miner's config during copy/paste? Also once you fail to authorise you get throttled for attempted auths for the next 10 minutes (this has always been the case though).

[WBF1]

re: pool problems... it says "Failed authorization " but I literally haven't changed a thing. Still [address].[worker] yes? I get same result on 3334 and 3333

Sure you haven't added a space or something in your username in your miner's config during copy/paste? Also once you fail to authorise you get throttled for attempted auths for the next 10 minutes (this has always been the case though).

yeah 100% sure all i did was turn off my miners for like a day. oh and i had them pointed to kano.is for a while as well.