y_virtual
Sr. Member
Offline
Activity: 377
Merit: 251
Note to self: it's not you doing it, it's us.
|
|
November 11, 2016, 08:32:28 AM |
|
All, We have just issued version 2.1.7, protocol version 70005, to fix the problem described below: "The reduced txn fee change caused 2.1.1 nodes to fork because 2.1.6 nodes were not paying enough fees. This in turn caused 2.1.6 nodes to fork sporadically." Please update your Qt wallet ASAP and begin staking so we can get the network moving again. Note: This update requires a Blockchain Reload. This is due to the fact that some 2.1.6 nodes are ahead of the master node, and we want to get everyone one the correct chain. After the reload, please rescan your wallet. If you are running a daemon, you can download the bootstrap.zip here: http://blockexplorer.solarcoin.org/downloads/bootstrap.zipPS: We will be notifying the exchanges and explorer ASAP. The website will be updated later today. PPS: After the rescan, you may see conflicted transactions from earned interest. You will make up the "lost" interest in future stakes. Hi Steve, Please let us know when the Explorer has been updated, so that we are sure we have the correct height there to compare to. Thanks!
|
|
|
|
Nomadseif
Newbie
Offline
Activity: 38
Merit: 0
|
|
November 11, 2016, 08:34:41 AM |
|
I've had version 2.1.7 running and staking for 11.5 hours working great and is staying on the correct chain no more orphaned blocks all interest is getting confirmed.
Nice work devs on get the problem fix quickly.
|
|
|
|
Scalextrix
|
|
November 11, 2016, 08:39:34 AM |
|
All, We have just issued version 2.1.7, protocol version 70005, to fix the problem described below: "The reduced txn fee change caused 2.1.1 nodes to fork because 2.1.6 nodes were not paying enough fees. This in turn caused 2.1.6 nodes to fork sporadically." Please update your Qt wallet ASAP and begin staking so we can get the network moving again. Note: This update requires a Blockchain Reload. This is due to the fact that some 2.1.6 nodes are ahead of the master node, and we want to get everyone one the correct chain. After the reload, please rescan your wallet. If you are running a daemon, you can download the bootstrap.zip here: http://blockexplorer.solarcoin.org/downloads/bootstrap.zipPS: We will be notifying the exchanges and explorer ASAP. The website will be updated later today. PPS: After the rescan, you may see conflicted transactions from earned interest. You will make up the "lost" interest in future stakes. Hi Steve, Please let us know when the Explorer has been updated, so that we are sure we have the correct height there to compare to. Thanks! I got syncd and went ahead of the explorer by more than 10 blocks, also my balance went wrong again so re-scanning (again)
|
SolarCoin Address: 8cESoZyjFvx2Deq6VjQLqPfAwu8UXjcBkK Gridcoin Address: SAuPu8zarzQykWLGwxc6JRvW3imM8YU9wc Pinkcoin Address: 2GTnp7oRn2i6KnuwfGaFh1Ps7RZFyDe6nH MannaCurrency Address: GXDwi6W888jbQZ7a79GTaStxiQsYehisfi
|
|
|
sylph93
|
|
November 11, 2016, 08:51:44 AM |
|
2.1.7 version wallet wokrs like charm. I removed old peer.dat after updating wallet. reloaded blockchain. The wallet has been on correct chain for hours. Good job devs!
|
|
|
|
solarcoiner
|
|
November 11, 2016, 01:11:58 PM |
|
2.1.7 version wallet wokrs like charm. I removed old peer.dat after updating wallet. reloaded blockchain. The wallet has been on correct chain for hours. Good job devs! Same here, back online and staking since around 12hours... A big thank you to the devs for fixing this ASAP. For those who are still having problems: 1- Uninstall Solarcoin from your PC 2- Delete the Solarcoin folder from the Appdata folder (but make sure you have the wallet.dat file backed up somewhere) 3- Restart PC 4- Install Solarcoin Wallet version 2.1.7 5- When it asks you if you want to recover a backed up wallet press NO (I noticed when you press Yes it reloads the entire blockchain without extracting the bootstrap which does make it a lot faster) 6- Once the Wallet is installed it should download the bootstrap and extract it 7- Then the wallet will restart and you will be asked to create a new passphrase 8- Create the new Passphrase by typing whatever you want (I used 1234567890 ) 9- The wallet should now load the last 200-500 Blocks and once loaded it should be on the correct chain. 10- Quit the wallet and open the appdata folder 11- Replace your backed up wallet.dat file with the once that just got created. 12- Reopen the wallet, enter your password and once in the wallet press rescan wallet. 13- ONce this is done your wallet should be back online and staking on the correct chain Hope this helped
|
|
|
|
solarcoiner
|
|
November 11, 2016, 01:23:00 PM |
|
All, We have just issued version 2.1.7, protocol version 70005, to fix the problem described below: "The reduced txn fee change caused 2.1.1 nodes to fork because 2.1.6 nodes were not paying enough fees. This in turn caused 2.1.6 nodes to fork sporadically." Please update your Qt wallet ASAP and begin staking so we can get the network moving again. Note: This update requires a Blockchain Reload. This is due to the fact that some 2.1.6 nodes are ahead of the master node, and we want to get everyone one the correct chain. After the reload, please rescan your wallet. If you are running a daemon, you can download the bootstrap.zip here: http://blockexplorer.solarcoin.org/downloads/bootstrap.zipPS: We will be notifying the exchanges and explorer ASAP. The website will be updated later today. PPS: After the rescan, you may see conflicted transactions from earned interest. You will make up the "lost" interest in future stakes. Hi Steve, Please let us know when the Explorer has been updated, so that we are sure we have the correct height there to compare to. Thanks! Yes I was also thinking about that. How do we really know what the real chain is? How do we even know the explorer is on the right chain. Since everyone was on a fork how can we tell?
|
|
|
|
onsightit
|
|
November 11, 2016, 03:28:59 PM |
|
All, We have just issued version 2.1.7, protocol version 70005, to fix the problem described below: "The reduced txn fee change caused 2.1.1 nodes to fork because 2.1.6 nodes were not paying enough fees. This in turn caused 2.1.6 nodes to fork sporadically." Please update your Qt wallet ASAP and begin staking so we can get the network moving again. Note: This update requires a Blockchain Reload. This is due to the fact that some 2.1.6 nodes are ahead of the master node, and we want to get everyone one the correct chain. After the reload, please rescan your wallet. If you are running a daemon, you can download the bootstrap.zip here: http://blockexplorer.solarcoin.org/downloads/bootstrap.zipPS: We will be notifying the exchanges and explorer ASAP. The website will be updated later today. PPS: After the rescan, you may see conflicted transactions from earned interest. You will make up the "lost" interest in future stakes. Hi Steve, Please let us know when the Explorer has been updated, so that we are sure we have the correct height there to compare to. Thanks! Yes I was also thinking about that. How do we really know what the real chain is? How do we even know the explorer is on the right chain. Since everyone was on a fork how can we tell? The CryptoID explorer was updated to 2.1.7 yesterday. It is on the same block as the masternode, and we are watching it. The 2.1.7 wallet is on protocol version 70005 and will block any nodes on 70004, so if you are still having syncing issues, please reload the blockchain and rescan your wallet. That works 99.9% of the time, but if not, shut down the wallet, remove your peers.dat and make sure the only addnode in your wallet config is: addnode=162.243.214.120 Also, please ensure that the clock on your computer is set accurately. This is known to cause some nodes to have trouble syncing. Thanks, for your patience. -Steve
|
VRC: VMTMcvFjZHAshmVNLY5KYVHCTqcfEnH6Bd SLR: 8W7D6D7rortYp51BK9MSrfripSoZWyVPVr BTC: 1LbgAsTDtyWEGjiSaguJhJbaHBPgcMnHfP BCC: 1Ta39PK67VXTD2xnmPNo5J9KJyBVHdYmy
|
|
|
user_fred
Member
Offline
Activity: 95
Merit: 10
|
|
November 11, 2016, 06:22:07 PM Last edit: November 11, 2016, 06:54:25 PM by user_fred |
|
Hi all, for Lykkex, does anyone know why the pool address 8cSBrj3d9Hc2KZ6dfNCMHG4BqLwjMjNULP is not in the blockchain. We are asked to send to this address, but for what i can see , it doesn't exist. Thanks for your answer if you have, i have also asked to Alan. fred
|
@: 8cfscmSGjePDWwu6w5kbMbACwHhybLrawk §1 = 1MWh
|
|
|
nickgogerty
|
|
November 11, 2016, 06:26:40 PM Last edit: November 11, 2016, 06:55:45 PM by nickgogerty |
|
Hi all, for Lykkex, does anyone know why the pool address 8cSBrj3d9Hc2KZ6dfNCMHG4BqLwjMjNULP is not in the blockchain. We are asked to send to this address, but for what i can see , it doesn't exist. Thanks for your answer if you have, i also have asked to Alan. fred
Fred not sure about that. I will ask Nika and Lykke to this thread to respond.
|
Solarcoin (§ SLR) are like airmiles. Each 1 Mhw generated gets you §1 free. Solarcoins can purchase what others will trade: USD,BTC, Soy candles..etc.
|
|
|
LykkeX
|
|
November 11, 2016, 07:38:05 PM |
|
Hi all, for Lykkex, does anyone know why the pool address 8cSBrj3d9Hc2KZ6dfNCMHG4BqLwjMjNULP is not in the blockchain. We are asked to send to this address, but for what i can see , it doesn't exist. Thanks for your answer if you have, i have also asked to Alan. fred
Dear Fred, the address was generated, but haven't been used earlier. Nick just tried to send small tx 0.5 SLR https://chainz.cryptoid.info/slr/address.dws?8cSBrj3d9Hc2KZ6dfNCMHG4BqLwjMjNULP.htm , which was successfully received. If you sent the transfer to this address earlier, but don't see transaction in the blockchain, you might need to roll back and rescan the wallet, and then resend the coins. We suggest to send a small amount first and wait for our confirmation before full transfer. Warm regards, Sergey Ivliev, COO Lykke
|
|
|
|
|
user_fred
Member
Offline
Activity: 95
Merit: 10
|
|
November 11, 2016, 08:00:32 PM |
|
ok thanks, well received.
|
@: 8cfscmSGjePDWwu6w5kbMbACwHhybLrawk §1 = 1MWh
|
|
|
|
TooQik
|
|
November 12, 2016, 03:51:46 AM |
|
Many thanks to all those involved in fixing the issue, your efforts are greatly appreciated. I have managed to lose just under 500 SLR between the update from 2.1.1 to 2.1.7, roughly 1% of my total, so not sure what to make of that, but at least all appears to be working again. I also used the downtime to update my ten year old laptop with a SSD; night and day difference.
|
|
|
|
corather
Legendary
Offline
Activity: 1708
Merit: 1000
Solarcoin.org
|
|
November 12, 2016, 04:45:51 AM |
|
Hi all, for Lykkex, does anyone know why the pool address 8cSBrj3d9Hc2KZ6dfNCMHG4BqLwjMjNULP is not in the blockchain. We are asked to send to this address, but for what i can see , it doesn't exist. Thanks for your answer if you have, i have also asked to Alan. fred
Dear Fred, the address was generated, but haven't been used earlier. Nick just tried to send small tx 0.5 SLR https://chainz.cryptoid.info/slr/address.dws?8cSBrj3d9Hc2KZ6dfNCMHG4BqLwjMjNULP.htm , which was successfully received. If you sent the transfer to this address earlier, but don't see transaction in the blockchain, you might need to roll back and rescan the wallet, and then resend the coins. We suggest to send a small amount first and wait for our confirmation before full transfer. Warm regards, Sergey Ivliev, COO Lykke I understand Lykke services aren't available for people in the US, does this mean I cannot provide solarcoin for the liquidity pool since I'm in the US?
|
|
|
|
nickgogerty
|
|
November 12, 2016, 04:48:42 AM |
|
Many thanks to all those involved in fixing the issue, your efforts are greatly appreciated. I have managed to lose just under 500 SLR between the update from 2.1.1 to 2.1.7, roughly 1% of my total, so not sure what to make of that, but at least all appears to be working again. I also used the downtime to update my ten year old laptop with a SSD; night and day difference. If the loss was from interest earned by staking. It should be earned back over time based on the staking algo according to our lead dev.
|
Solarcoin (§ SLR) are like airmiles. Each 1 Mhw generated gets you §1 free. Solarcoins can purchase what others will trade: USD,BTC, Soy candles..etc.
|
|
|
TooQik
|
|
November 12, 2016, 05:12:03 AM |
|
Many thanks to all those involved in fixing the issue, your efforts are greatly appreciated. I have managed to lose just under 500 SLR between the update from 2.1.1 to 2.1.7, roughly 1% of my total, so not sure what to make of that, but at least all appears to be working again. I also used the downtime to update my ten year old laptop with a SSD; night and day difference. If the loss was from interest earned by staking. It should be earned back over time based on the staking algo according to our lead dev. The loss would be attributed to staking but it would not be attributed to the 2.1.6 / 2.1.7 upgrade as my 2.1.1 wallet total was roughly 55,500 before 2.1.6 was released. Interest wise I used to get about 2 SLR a day on 2.1.1, so losing 500 SLR is losing roughly 250 days of staking, which is quite substantial. I've re scanned my wallet a few times now but the total remained the same at roughly 55,040 before any new interest was earned. I'm not overly worried at losing 500 SLR, more raising it as a point of interest to see if anyone else experiences a similar issue.
|
|
|
|
Scalextrix
|
|
November 12, 2016, 10:03:12 AM Last edit: November 12, 2016, 10:40:41 AM by Scalextrix |
|
My machine hibernated last night, now Im stuck unable to sync again, also the balance was wrong again!
I rescanned the blockchain and that fixed the balance but this is getting quite frustrating, it wont sync.
Am I getting banned or something, I have plenty of connections?
EDIT: OK I noticed in the console command getinfo that my IP was looking quite strange, a hexadecimal almost like an IPv6 address. I reset my WAN IP by jumping on a VPN, restarted the wallet and the IP now shows like an IPv4 address and I started syncing, it progressed a couple of hundred blocks and Im stuck again now.
|
SolarCoin Address: 8cESoZyjFvx2Deq6VjQLqPfAwu8UXjcBkK Gridcoin Address: SAuPu8zarzQykWLGwxc6JRvW3imM8YU9wc Pinkcoin Address: 2GTnp7oRn2i6KnuwfGaFh1Ps7RZFyDe6nH MannaCurrency Address: GXDwi6W888jbQZ7a79GTaStxiQsYehisfi
|
|
|
vipgelsi
Legendary
Offline
Activity: 1736
Merit: 1001
|
|
November 12, 2016, 11:09:10 AM |
|
Both my wallets also stuck.
|
|
|
|
Scalextrix
|
|
November 12, 2016, 12:21:10 PM Last edit: November 12, 2016, 12:32:23 PM by Scalextrix |
|
Alright, I seem to be back in business, I didnt do anything, it just synced while I wasnt looking, weird EDIT: false alarm, Im on a chain about 700 behind the block explorer, wondered why I was staking every few minutes in wallet explorer has height 1455698, Im staking on 1454964 2nd EDIT: taken my wallet offline, no point in contributing to the bad chain
|
SolarCoin Address: 8cESoZyjFvx2Deq6VjQLqPfAwu8UXjcBkK Gridcoin Address: SAuPu8zarzQykWLGwxc6JRvW3imM8YU9wc Pinkcoin Address: 2GTnp7oRn2i6KnuwfGaFh1Ps7RZFyDe6nH MannaCurrency Address: GXDwi6W888jbQZ7a79GTaStxiQsYehisfi
|
|
|
|