KanoPool since 2014 🐈 - PPLNS and Solo 0.5% fee - Worldwide - 2437 blocks

[AriesIV10]

Kano,

A few comments as a Newbie to CKPool.  Note: I am coming from Slush's.  I am learning the system daily and reading the forum as well to bring myself abreast of the more experienced users.  I do not know what I do not know.  Are the following suggestions possible / already suggested / or not in the scope of your vision?

* ACTION: Can this be added to CKPool?   http://ckpoolmonitor.zachmonroe.com/userhashrate_workers.php
   REASON:  I had a miner go down yesterday and because of zachmonroe, I was aware of the issue and could address the issue.  
   Here are the features great features:
  - Email notifications of low hashrate
  - Chart by miner and total.
  - Block Found email
  - Worker Offline email

* ACTION:  Measure by hashrate for the total and individual miner(s) in 5 min, last hour, last day to show efficiency of the miner?
   REASON:  This would easily give the user information as to how their total or individual miners are performing

* ACTION: Can a measurement device be added to measure where I am in total toward the 5Nd?  Recommendation:  Add a ____% right under the Hash Rate on the Header.
   REASON: I only know where my total "Your %" is, after a block is found.  I had seen another person taking 20TH/s to mine with solo.ckpool for a day or two.  I may want to do this as well and would then like to know where my total TH/s rate is in comparison to my other miners.

There are GREAT features to CKPool!  I am really liking it along with the Moderator here online with us users that is transparent with us.  Thanks Again.

[bctmke]

i am willing to put in some donation if you are willing to setup a asia server (sg or hk) as backup or secondary server. just saying & if you are keen & have the time to do it.

Good point.  Any inclination here Kano to put a second (or third) server in a different country?

With the speed of ckpool having devices in other countries *shouldn't* be an issue so i could see it be something not very high on your priority list (or not on it at all).

[kano]

i am willing to put in some donation if you are willing to setup a asia server (sg or hk) as backup or secondary server. just saying & if you are keen & have the time to do it.

Good point.  Any inclination here Kano to put a second (or third) server in a different country?

With the speed of ckpool having devices in other countries *shouldn't* be an issue so i could see it be something not very high on your priority list (or not on it at all).

-ck has already done the necessary work, I'm in the process of setting up servers ... but as usual other things happen, but it's getting there

[kano]

Kano,

A few comments as a Newbie to CKPool.  Note: I am coming from Slush's.  I am learning the system daily and reading the forum as well to bring myself abreast of the more experienced users.  I do not know what I do not know.  Are the following suggestions possible / already suggested / or not in the scope of your vision?

* ACTION: Can this be added to CKPool?  It adds Great Features to CKPool:   http://ckpoolmonitor.zachmonroe.com/userhashrate_workers.php
   REASON:  I had a miner go down yesterday and because of zachmonroe, I was aware of the issue and could address the issue.
  - Email notifications of low hashrate
  - Chart by miner and total.  If measuring the miner, can this measure by hashrate in 5 min, last hour, last day to show efficiency of the miner?
  - Block Found
  - Worker Offline

The API has the information that zach uses (and apps can use) and that's how he gets it.
Notifications are done by apps and web sites, coz there are major issues using email if you depend only on it and email stops working ...

Not sure what you mean about the 'chart' bit, you'll need to explain that separately.

* ACTION: Can a measurement device be added to measure where I am in total toward the 5Nd?  Recommendation:  Add a ____% right under the Hash Rate on the Header.
   REASON: I only know where my total "Your %" is, after a block is found.  I had seen another person taking 20TH/s to mine with solo.ckpool for a day or two.  I may want to do this as well and would then like to know where my total TH/s rate is in comparison to my other miners.

The 5Nd calculation is still not available since it would have to update that information in real time with every share that arrives.
It's not impossible, but not something I've wanted to change yet since it will have performance implications.

I'm not sure if you've noticed, but all the worker information in the API and web site is accurate to the second.
ckdb does shift processing and locks out everything for 4 seconds each time it does this (but that also includes DB IO), so I don't want it calculated regularly at intervals and thus being stale information. It would have to be tracked in real time with each share arriving.
It's on my todo list, but I've no idea when I'll do it.

[kano]

... and another post

Anyone using the API, I've added a new data item "STAMP"
This is the pool epoch 'now' timestamp when the data was generated.

If, in your app/web/whatever, you do comparisons like "How long ago was the last block" or "How long ago was my last share" then you should use "STAMP" for now, not the device/web site time.

The main reason being that devices are far from accurate and "STAMP" will always be accurate.
Also, of course, the data is accurate as at "STAMP", so assuming anything about the data after the "STAMP" point in time will not be correct.

[yslyung]

i am willing to put in some donation if you are willing to setup a asia server (sg or hk) as backup or secondary server. just saying & if you are keen & have the time to do it.

Good point.  Any inclination here Kano to put a second (or third) server in a different country?

With the speed of ckpool having devices in other countries *shouldn't* be an issue so i could see it be something not very high on your priority list (or not on it at all).

-ck has already done the necessary work, I'm in the process of setting up servers ... but as usual other things happen, but it's getting there

noticed that ck has done it & that's why i suggested it. thx for the hardwork. keep it up !

K pool will defo have my support, i brought 2 friends in already & will bring more + some added hashpower soon.

[baazju]

Good to see this pool is growing Ready for another block party.

[VRobb]

Just finished bottling my beer and - BLOCK!

[Real-Duke]

The Party goes on 

[Real-Duke]

Just finished bottling my beer and - BLOCK!

Cheers 

[hawkfish007]

Congrats mlynekse!

[dmwardjr]

SweeeeeeeeeeeT  

Great Job, mlynekse with that 4.72 TH/s!!!

[yslyung]

keep it rolling !

[e46btc]

Just finished bottling my beer and - BLOCK!

That's great.. time to sleep  Hope for one more 6h later

[AriesIV10]

Kano,

A few comments as a Newbie to CKPool.  Note: I am coming from Slush's.  I am learning the system daily and reading the forum as well to bring myself abreast of the more experienced users.  I do not know what I do not know.  Are the following suggestions possible / already suggested / or not in the scope of your vision?

* ACTION: Can this be added to CKPool?  It adds Great Features to CKPool:   http://ckpoolmonitor.zachmonroe.com/userhashrate_workers.php
   REASON:  I had a miner go down yesterday and because of zachmonroe, I was aware of the issue and could address the issue.
  - Email notifications of low hashrate
  - Chart by miner and total.  If measuring the miner, can this measure by hashrate in 5 min, last hour, last day to show efficiency of the miner?
  - Block Found
  - Worker Offline

The API has the information that zach uses (and apps can use) and that's how he gets it.
Notifications are done by apps and web sites, coz there are major issues using email if you depend only on it and email stops working ...

Not sure what you mean about the 'chart' bit, you'll need to explain that separately.

* ACTION: Can a measurement device be added to measure where I am in total toward the 5Nd?  Recommendation:  Add a ____% right under the Hash Rate on the Header.
   REASON: I only know where my total "Your %" is, after a block is found.  I had seen another person taking 20TH/s to mine with solo.ckpool for a day or two.  I may want to do this as well and would then like to know where my total TH/s rate is in comparison to my other miners.

The 5Nd calculation is still not available since it would have to update that information in real time with every share that arrives.
It's not impossible, but not something I've wanted to change yet since it will have performance implications.

I'm not sure if you've noticed, but all the worker information in the API and web site is accurate to the second.
ckdb does shift processing and locks out everything for 4 seconds each time it does this (but that also includes DB IO), so I don't want it calculated regularly at intervals and thus being stale information. It would have to be tracked in real time with each share arriving.
It's on my todo list, but I've no idea when I'll do it.

Me: Thanks so much for the feedback!  

You: Not sure what you mean about the 'chart' bit, you'll need to explain that separately.

Me: This is the Your Hash Graph that is located on http://ckpoolmonitor.zachmonroe.com/userhashrate.php   I was wondering if you were going to add a form of graphing (chart) of hashrates onto your pool.
       Thanks Again for your feedback!


  

[Real-Duke]

Damn I wish it could be the 50min block before solved from Antpool with many fees but Im dancing anyway  

[citronick]

Kano will only let us grow so large before he stops allowing new miners (if I recall his goal is 10% of the network).

Really?

https://bitcointalk.org/index.php?topic=789369.msg13431812#msg13431812

just started (imho, it's still in it's infancy stage), hang on to it, keep the heads low, good support & teamwork is VERY important & enjoy the profits.

far way to go but it's always good to see a steady growth.

payouts received.

kano me want you to get bz alarm going off more frequent & sending more payouts. let's make it happen.

i am willing to put in some donation if you are willing to setup a asia server (sg or hk) as backup or secondary server. just saying & if you are keen & have the time to do it.

LIKE.

Support the asia server idea.... SG if possible.... ckpool recently added the hk.solo server.... time to balance the force at SG... :-)

[yslyung]

Kano will only let us grow so large before he stops allowing new miners (if I recall his goal is 10% of the network).

Really?

https://bitcointalk.org/index.php?topic=789369.msg13431812#msg13431812

just started (imho, it's still in it's infancy stage), hang on to it, keep the heads low, good support & teamwork is VERY important & enjoy the profits.

far way to go but it's always good to see a steady growth.

payouts received.

kano me want you to get bz alarm going off more frequent & sending more payouts. let's make it happen.

i am willing to put in some donation if you are willing to setup a asia server (sg or hk) as backup or secondary server. just saying & if you are keen & have the time to do it.

LIKE.

Support the asia server idea.... SG if possible.... ckpool recently added the hk.solo server.... time to balance the force at SG... :-)

hey cit,

i think we exchanged some chats before regarding sg power bills ? i think it's u mate.

yeah me support SG server.

let the man do his job & i'm sure it'll show up pretty quick but i think it'll be most likely hk server as it's more central.

would luv to see couple more blocks heading this way. i'll smack ma miners, they not working hard enuff.

smack smack & comes few more blocks.

[-ck]

i am willing to put in some donation if you are willing to setup a asia server (sg or hk) as backup or secondary server. just saying & if you are keen & have the time to do it.

Support the asia server idea.... SG if possible.... ckpool recently added the hk.solo server.... time to balance the force at SG... :-)

There's more to this than it seems. Solo's pools are all completely separate. That's not quite what Kano meant here:

-ck has already done the necessary work, I'm in the process of setting up servers ... but as usual other things happen, but it's getting there

The work he speaks of is new ckpool code to allow remote nodes to communicate with the main mining server but also have the ability to submit blocks themselves to make the most of the miners' lower latency communication with those remote nodes.

[wikkidtt]

Is there any iPhone app I can use to monitor the pool/workers.

Many other pools have this but I have yet to see one for our pool