KanoPool since 2014 🐈 - PPLNS and Solo 0.5% fee - Worldwide - 2438 blocks

[Stonereth]

thinkin about throwing an s7 to this pool later tonight, hope thats ok and best of luck 2 u all!!

[overcon]

thinkin about throwing an s7 to this pool later tonight, hope thats ok and best of luck 2 u all!!

I don't see why not. I run two S9's two S7's and 3 S5's. I purchased another s9 which will be shipping August 25th and so I will probably take offline the S5's once I add the new S9.

[clgrissom3]

Block by mikese!  This is our 3rd of BLOCK SATURDAY!

A nice sized 15.3+ block and 2 payouts!

[firetreeactual]

I've got two new 741s that have been stuck in Memphis hub since Wednesday, "Available for clearance." Did POTUS forget to hire CBP folks? 

[clgrissom3]

I've got two new 741s that have been stuck in Memphis hub since Wednesday, "Available for clearance." Did POTUS forget to hire CBP folks?  

Another FedEx International snafu I presume...I cringe every time they are involved in shipping equipment from the far east.  I wish Canaan would give us a choice to use UPS to the USA.  I've never had any issues with them.

[oawan]

Block by mikese!  This is our 3rd of BLOCK SATURDAY!

A nice sized 15.3+ block and 2 payouts!

Was just looking at it and DAMN 103 trillion best share. 

Is that a record?

[firetreeactual]

I've got two new 741s that have been stuck in Memphis hub since Wednesday, "Available for clearance." Did POTUS forget to hire CBP folks?  

Another FedEx International snafu I presume...I cringe every time they are involved in shipping equipment from the far east.  I wish Canaan would give us a choice to use UPS to the USA.  I've never had any issues with them.

I guess so. I've not had any problems with them, actually...but UPS has misdelivered two of my packets in the past two weeks...hmmm. It's just frustrating that their 800 number is nothing but a computer, and their local offices are unpublished for the number. However...never say never to a retired forensic scientist...I found the Lihue center number...but no one will be there until Monday. Maybe I can at least find out what the real problem is.

Mine on.

[dzimmerm56]

I've got two new 741s that have been stuck in Memphis hub since Wednesday, "Available for clearance." Did POTUS forget to hire CBP folks?  

Another FedEx International snafu I presume...I cringe every time they are involved in shipping equipment from the far east.  I wish Canaan would give us a choice to use UPS to the USA.  I've never had any issues with them.

I have been using DHL when ordering from Bitmain and they seem to do a fairly decent job.

[HannRa]

Heads up on scaling developments, worth to keep an eye on.

- http://bitsonline.com/china-bitcoin-roundtable-segwit2x/

"NYA" will be signalled by miners supporting SegWit2x aka. "New York Agreement", starting on Monday 19.th of June (tomorrow). Estimate support is expected to breach 80%.

Plan foresees SegWit activation before August 1; at first, compatible with BIP141/SegWit and BIP148/UASF software, and then followed by incompatible hard fork to bigger (2MB) blocks 3 months after SegWit activation (expected somewhere in late November).

[clgrissom3]

Block by Abramov!  This is our 1st of BLOCK SUNDAY!

This block comes just after the diff changed to 712G...not to shabby!

And for the first time in a long time our Block Statistics table has 100%+ in every single category!  

[kano]

Heads up on scaling developments, worth to keep an eye on.

- http://bitsonline.com/china-bitcoin-roundtable-segwit2x/

"NYA" will be signalled by miners supporting SegWit2x aka. "New York Agreement", starting on Monday 19.th of June (tomorrow). Estimate support is expected to breach 80%.

Plan foresees SegWit activation before August 1; at first, compatible with BIP141/SegWit and BIP148/UASF software, and then followed by incompatible hard fork to bigger (2MB) blocks 3 months after SegWit activation (expected somewhere in late November).

Guess I might be busy working on redoing all the bitcoinds on the pool some time soon again ...
Lucky I'm back home for now.

I run ... ... ... 13 (at the moment) bitcoinds on the pool itself ... and 4 more at home

[clgrissom3]

Block by wittali with 83TH/s!  This is your 2nd Kano block and our 2nd of BLOCK SUNDAY (and only 2 hours in)!

[Apprentice]

I've got two new 741s that have been stuck in Memphis hub since Wednesday, "Available for clearance." Did POTUS forget to hire CBP folks?  

Another FedEx International snafu I presume...I cringe every time they are involved in shipping equipment from the far east.  I wish Canaan would give us a choice to use UPS to the USA.  I've never had any issues with them.

I have been using DHL when ordering from Bitmain and they seem to do a fairly decent job.

I agree. Always use DHL, very professional, customer support is great. They do not ship without making sure all necessary documents and clearances are available.

[madmartyk]

Question for US miners, I have a unused 20 Amp double pole breaker in my panel.  I know it will provide 220V.  Any issues hooking up my miners to a circuit with 2 hots and a ground?

[philipma1957]

Question for US miners, I have a unused 20 Amp double pole breaker in my panel.  I know it will provide 220V.  Any issues hooking up my miners to a circuit with 2 hots and a ground?

it should be good for  .80 x 20 x 240 = 3840 watts max

please note  the info below is to show gear that would be good with your power/circuit I do not know the sellers.

but the pdu is nice at that  price and he takes offers for it

http://www.ebay.com/itm/Replacement-20-Amp-250-Volt-Female-Twist-Lock-3-Wire-Power-Cord-Plug-Nema-L6-20R-/121126599980?


http://www.ebay.com/itm/Tripp-Lite-PDU-Metered-200-240V-20A-8-C13-2-C19-Outlet-L6-20P-1U-RM-TAA-Tested-/382108054420?



some of these
http://www.ebay.com/itm/AC-Power-Cord-C13-to-C14-14-AWG-2ft-Yellow-/371984120790?

or these  depends on your psu

http://www.ebay.com/itm/6-foot-Power-Cord-Black-NEMA-C19-to-C20-14AWG-/391469503510?

[madmartyk]

Question for US miners, I have a unused 20 Amp double pole breaker in my panel.  I know it will provide 220V.  Any issues hooking up my miners to a circuit with 2 hots and a ground?

it should be good for  .80 x 20 x 240 = 3840 watts max

please note  the info below is to show gear that would be good with your power/circuit I do not know the sellers.

but the pdu is nice at that  price and he takes offers for it

http://www.ebay.com/itm/Replacement-20-Amp-250-Volt-Female-Twist-Lock-3-Wire-Power-Cord-Plug-Nema-L6-20R-/121126599980?


http://www.ebay.com/itm/Tripp-Lite-PDU-Metered-200-240V-20A-8-C13-2-C19-Outlet-L6-20P-1U-RM-TAA-Tested-/382108054420?



some of these
http://www.ebay.com/itm/AC-Power-Cord-C13-to-C14-14-AWG-2ft-Yellow-/371984120790?

or these  depends on your psu

http://www.ebay.com/itm/6-foot-Power-Cord-Black-NEMA-C19-to-C20-14AWG-/391469503510?

Thanks Phil!!!

[Apprentice]

Question for US miners, I have a unused 20 Amp double pole breaker in my panel.  I know it will provide 220V.  Any issues hooking up my miners to a circuit with 2 hots and a ground?

You need to check how is the breaker connected. are both poles hot or 1 is hot with the other to neutral? Normally it should be 1 hot and 1 N and both switches are connected externally. if your hot input is 110v, than you have 110v output too, plus N of course.

[philipma1957]

Question for US miners, I have a unused 20 Amp double pole breaker in my panel.  I know it will provide 220V.  Any issues hooking up my miners to a circuit with 2 hots and a ground?

You need to check how is the breaker connected. are both poles hot or 1 is hot with the other to neutral? Normally it should be 1 hot and 1 N and both switches are connected externally. if your hot input is 110v, than you have 110v output too, plus N of course.

this is viable  as the inside of the breaker box  can be such that one of the   2 hot bars  may  be shorter then the other.

let me see if I can find a photo


https://www.hunker.com/12185669/how-to-install-220-volt-electrical-circuit-breakers

best I can find.

please be very careful 220/240 =  strong powerful possible death

[madmartyk]

Question for US miners, I have a unused 20 Amp double pole breaker in my panel.  I know it will provide 220V.  Any issues hooking up my miners to a circuit with 2 hots and a ground?

You need to check how is the breaker connected. are both poles hot or 1 is hot with the other to neutral? Normally it should be 1 hot and 1 N and both switches are connected externally. if your hot input is 110v, than you have 110v output too, plus N of course.

this is viable  as the inside of the breaker box  can be such that one of the   2 hot bars  may  be shorter then the other.

let me see if I can find a photo


https://www.hunker.com/12185669/how-to-install-220-volt-electrical-circuit-breakers

best I can find.

please be very careful 220/240 =  strong powerful possible death

The circuit is all ready wired to an outlet in the garage, for a 220V welder.  I was planning on wiring a new outlet in the house.  I understand that a 220 2 pole breaker uses 2 hots and the ground.  I guess what I'm asking is it OK to use that kind of circuit on the power supples for miners?  I know they will run on 220V.

[ComputerGenie]

...I guess what I'm asking is it OK to use that kind of circuit on the power supples for miners? ...

In a word: "Yes".