|
filharvey
|
 |
June 10, 2012, 03:31:18 PM |
|
Thanks, got my shipping number last night. Looking forward to getting the device on tues / wed.
Phil
|
|
|
|
rjk
Sr. Member
 Offline
Activity: 448
Merit: 250
1ngldh
|
|
June 10, 2012, 04:58:15 PM |
|
Not sure why I'm not subscribed... So now I am
|
|
|
|
|
cablepair (OP)
|
|
June 11, 2012, 01:39:29 AM |
|
SOFTWARE ANNOUNCEMENT!
I have just received a completed windows cgminer binary compatible with the ModMiner Quad!
This is awesome stuff and I know you will all love to be able to mine your MMQ along with your other FPGAs and GPUS in one of the worlds best Mining Software!
|
|
|
|
|
|
filharvey
|
|
June 11, 2012, 01:47:20 AM |
|
That is nice, it's let me know where to down, so my current cgminer set up with with theme card
|
|
|
|
|
cablepair (OP)
|
|
June 11, 2012, 04:21:56 PM |
|
*** CGMINER SCREEN SHOT ***  Just wanted to show off the ModMiner Quad hashing away in cgminer today! We are playing around with clock speeds but it seems to run pretty stable at 210 which gives us 840mhash right now its at 200mhz and giving out a steady 800mhash we also incorporated auto downclocking in overload situation, if overload / overheat is detected it will automatically lower the clock speed by 2 mhz every 180 seconds to prevent damage to the unit (in case a fan dies or extreme temps etc) |
|
|
|
|
imsaguy
General failure and former
VIP
Hero Member
Offline
Activity: 574
Merit: 500
Don't send me a pm unless you gpg encrypt it.
|
|
June 11, 2012, 04:26:24 PM |
|
Is that cgminer code being submitted to Con so we don't have to run a 'custom' cgminer?
|
|
|
|
|
cablepair (OP)
|
|
June 11, 2012, 04:56:54 PM |
|
Is that cgminer code being submitted to Con so we don't have to run a 'custom' cgminer?
no guarantees but yes I am going to do the best I can to see it gets added to 2.4.3 |
|
|
|
|
imsaguy
General failure and former
VIP
Hero Member
Offline
Activity: 574
Merit: 500
Don't send me a pm unless you gpg encrypt it.
|
|
June 11, 2012, 05:00:09 PM |
|
Is that cgminer code being submitted to Con so we don't have to run a 'custom' cgminer?
no guarantees but yes I am going to do the best I can to see it gets added to 2.4.3 You rock! I just don't "roll my own" cgminer, so I'd always be dependent on you guys to keep up with con's latest work. Getting it added to mainline solves problems for everyone. |
|
|
|
|
fizzisist
|
|
June 11, 2012, 08:59:49 PM |
|
Just wanted to show off the ModMiner Quad hashing away in cgminer today! We are playing around with clock speeds but it seems to run pretty stable at 210 which gives us 840mhash
right now its at 200mhz and giving out a steady 800mhash
we also incorporated auto downclocking in overload situation, if overload / overheat is detected it will automatically lower the clock speed by 2 mhz every 180 seconds to prevent damage to the unit (in case a fan dies or extreme temps etc)
What firmware are you running on this? |
|
|
|
|
mu50stang
|
|
June 11, 2012, 09:09:08 PM |
|
hes just testing a few final things but it appears to be completed, I will make sure its available to all mod miner quad owners by the time they get their unit Also *** IMPORTANT NOTICE *** A good customer of ours is experiencing some personal financial troubles... He was one of the first people to order from us, he purchase 5 x MMQ units and is entitled to an instant shipping date however he is currently facing a financial emergency and would like to sell his shipping spots to the first person who buys them Basically he is due to ship RIGHT NOW anyone who wants to buy five units and receive them this week! this is your time to shine!! send an email to tom@btcfpga.com and we can make arrangements for you to receive 5 ModMiner Quad units with delivery THIS WEEK. First come first serve! whoever is the first to pay for these five units will receive shipment this weekd and delivery in 2-4 days from that payment date, if interested email me! You can also call me at 315 514 0269 thanks! I purchased and paid for these 5 modminers to take the place in line and eagerly waiting their arrival. |
|
|
|
|
|
cablepair (OP)
|
|
June 11, 2012, 09:28:34 PM |
|
Just wanted to show off the ModMiner Quad hashing away in cgminer today! We are playing around with clock speeds but it seems to run pretty stable at 210 which gives us 840mhash
right now its at 200mhz and giving out a steady 800mhash
we also incorporated auto downclocking in overload situation, if overload / overheat is detected it will automatically lower the clock speed by 2 mhz every 180 seconds to prevent damage to the unit (in case a fan dies or extreme temps etc)
What firmware are you running on this? fpgaminer_top_fixed7_197MHz.ncd |
|
|
|
|
|
cablepair (OP)
|
|
June 12, 2012, 12:43:47 AM |
|
CGMINER Will Support the ModMiner Quad from this point on! I just received confirmation! CGMINER 2.4.3 WILL include ModMiner Quad Support along with the 210 Mhz clock which means your ModMiner Quad now does a STABLE 840 Mhash ! |
|
|
|
|
Cablez
Legendary
Offline
Activity: 1400
Merit: 1000
I owe my soul to the Bitcoin code...
|
|
June 12, 2012, 12:59:41 AM |
|
Very nice work guys!  |
Tired of substandard power distribution in your ASIC setup??? Chris' Custom Cablez will get you sorted out right! No job too hard so PM me for a quote
Check my products or ask a question here: https://bitcointalk.org/index.php?topic=74397.0
|
|
|
allinvain
Legendary
Offline
Activity: 3080
Merit: 1080
|
|
June 12, 2012, 02:36:54 AM |
|
840 Mhash still at 40W total?
|
|
|
|
|
cablepair (OP)
|
|
June 12, 2012, 02:59:56 AM |
|
ii dont see any increase in wattage from 800 to 840 on the killawatt
if there is any increase its inconsequential
|
|
|
|
|
|
fizzisist
|
|
June 12, 2012, 06:27:44 AM |
|
Just wanted to show off the ModMiner Quad hashing away in cgminer today! We are playing around with clock speeds but it seems to run pretty stable at 210 which gives us 840mhash
right now its at 200mhz and giving out a steady 800mhash
we also incorporated auto downclocking in overload situation, if overload / overheat is detected it will automatically lower the clock speed by 2 mhz every 180 seconds to prevent damage to the unit (in case a fan dies or extreme temps etc)
What firmware are you running on this? fpgaminer_top_fixed7_197MHz.ncd Cool, so any new firmware for the X6500 will be compatible with the ModMiner, and vice versa. Good to see that! ii dont see any increase in wattage from 800 to 840 on the killawatt
if there is any increase its inconsequential
There should definitely be an increase. Probably extending the line from my measurements. Theoretically, it could be even more than linear. Are you set up to do any more careful tests than a kill-a-watt? What is your VCCINT? |
|
|
|
|
cablepair (OP)
|
|
June 12, 2012, 01:33:20 PM |
|
Just wanted to show off the ModMiner Quad hashing away in cgminer today! We are playing around with clock speeds but it seems to run pretty stable at 210 which gives us 840mhash
right now its at 200mhz and giving out a steady 800mhash
we also incorporated auto downclocking in overload situation, if overload / overheat is detected it will automatically lower the clock speed by 2 mhz every 180 seconds to prevent damage to the unit (in case a fan dies or extreme temps etc)
What firmware are you running on this? fpgaminer_top_fixed7_197MHz.ncd Cool, so any new firmware for the X6500 will be compatible with the ModMiner, and vice versa. Good to see that! ii dont see any increase in wattage from 800 to 840 on the killawatt
if there is any increase its inconsequential
There should definitely be an increase. Probably extending the line from my measurements. Theoretically, it could be even more than linear. Are you set up to do any more careful tests than a kill-a-watt? What is your VCCINT? Here in my office the best I have is a killawatt, however at the location where these are being built and tested is a lot more high tech  , Ill ask my engineer about our VCCINT and get back to you |
|
|
|
|
|
regular
|
|
June 12, 2012, 06:17:23 PM |
|
I've finally saved up enough for one of your miners. If I were to place an order on your website, how long would it take to ship? Thanks!
|
|
|
|
|
|
cablepair (OP)
|
|
June 12, 2012, 07:04:41 PM |
|
for specific queries like that I would suggest contacting contact@btcfgpa.combut likely a couple of weeks for delivery and no more than 4 thanks! |
|
|
|
|
|
cablepair (OP)
|
|
June 12, 2012, 10:54:11 PM |
|
Sorry I haven't had a chance to post these sooner, many of you will see these in your mail boxes very soon! This is the final RETAIL version of the ModMiner Quad Rev.04 - the unit we are currently shipping:    |
|
|
|
|
|
Poll
