bensam1231
Legendary
Offline
Activity: 1750
Merit: 1024
|
|
March 05, 2017, 06:03:49 AM |
|
well it can support my hashrate, since i don't have a huge farm, i'm happy with it
and yes if dual mining with pascal was possible for nvidia it would have delivered a better profit for a 1060 for example, so yes it hash everything to do with it
maybe you forgot that we were talking about nvidia vs amd profitability, and that amd is only better because of dual eth+pasc...
You can't just copy what someone says and decide that it's also applicable against them. You were arguing that Nvidia was still very much relevant as far as hashrate goes... That's not true. Even if we had a Pasc+Eth miner (which we don't and also should be factored in that Claymore supports AMD first and foremost), the cards would still be 2x as expensive for not even close to double hashrate. do it with a 1060, with dual mining eth+pascal, the earning would be the same as one 480 and they cost the same i don't care about how much they cost in other country, here they cost the same around 200 euro we all know that a 1070 is better because of density you need to pay for this bonus...in fact the 1060 already is better in roi than a 1070, you don't even need to look at amd to beat the 1070 Yeah and a 1060 costs more AND isn't supported. Software is part of the game dude. You can't just say 'oh if this where XYZ it'd be better', truth is it isn't. I started mining with Nvidia hardware because when I swapped AMD was very poorly supported and Nvidia had a ton of open options and community cooperation between developers. That's pretty much gone. No, old information doesn't mean it's currently better. Prices change. I am one of the original people who argued about density close to two years ago in this very same thread. A 1060 has the same density as a 480 so that completely throws that argument out the window. A 1070 costs 2x as much for not anywhere close to 2x the density, density being hashrate. You can't compare three different video cards to one and pretend they're the same thing. IF you're arguing for a 1060 vs 480, then you have to keep going with that. If you add up the bonus density for a 1070 and similiar cost of a 1060, it doesn't mean they're better then a 480. You can't make a mutated version between a 1060 and 1070, it doesn't even make sense. A 1060 is a shitty version of a 480 right now. Only reason people are buying them is because they don't want to switch to AMD. What Nvidia used to do better then AMD, it doesn't anymore due to over saturation of Nvidia hashrate. There isn't a 'niche' for them anymore. 1070s and 1060s are currently inferrior to 480s, there isn't even a argument to be made here. You can essentially get 1.4x as much profit by buying a 480 compared to a 1060 and 1.5 compared to a 1070. That depends on your electricity, but that's at US average of $.1KWH. That means a 480 is 50% better then a 1070 and 40% compared to a 1060. 1060s can't dual mine PASC and they don't have the same support as AMD hardware right now. Completely putting aside you can spend a lot of money and get really good bins out of Wolf0. I have mined spreadcoin with 3 cards for a week. 1x1070 and 2x970. (18mhash). I now have more than $50 worth of.spreadcoin.
The calculator showed $2.8 per day for the 1070, but i got more than $4..
You're talking about trading, not mining (daily revenue). What you fail to realize is that in a multigpu environment, up to 6/7 vga in a farm, the clock frequency on average is far less than the one you always report with a single-gpu screen. With the algo SpreadX11, if you go past 1800/1830 MHz on avg it crashes; the reason is the algo switching, that forces the chip to go past 2035 MHz, and it hangs. Every algo is different, this one it's a bit complex to manage. Different models have different stable clocks though. Algo switching doesn't crash cards, unless you use an OC that won't work with some algos. That is why I use the lowest stable OC. Otherwise, algo switching doesn't push your card to 2035, there's no reason to do so. You might not close ccminer properly before an algo switch maybe? Algo switching can crash your GPU driver, that is entirely possible. Sometimes you need a full reboot to fix the issues. This usually happens at some bleeding edge clocks. I also have some cards that are factory OC'd to the point where 'light' algos will crash them when you either switch to them or off of them as the factory OC isn't entirely stable and the algo isn't drawing enough power to push down the clock through TDP. One of my Asus O8Gs does this. Library is currently really good at crashing my drivers even though I can mine for days on them without any problems, it happens when switching. Otherwise, most everything Nikolaj is talking about doesn't really make sense. The crashing part when switching algos does though.
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
March 05, 2017, 06:43:17 AM |
|
it doesn't crash for me it run stable at 9500KH 2000-2100 core, but consumption is too high, i prefer 9MH at 18xx core(already few days running at this rate, perfectly stable), the onyl thing is the stupid noise...
I've got 9 types of gtx 1070's.. This is the basis of my statements in matter. You can't generalize with a single tipology of vga. I've got too your g1 model, but the others are very different. It's also worth to be considered that the real efficiency of gtx 1070 derives from the wingle 8 pin PCIE versions, because ot the capped TDP amount. An sjs or amp extreme can lift higher than 1800/1850 MHz on average (from 8.4 to 8.7MH/s eventually) but with very bad efficiency (up to 220W in certain scenarios, opposed to 155W of a single 8 pin one). These are the reasons why I am not interested in models that have got 2 power connectors. From 8.4 to 9.4 we've got a theroretical performance increase of 11% on spr, with a giant loss in efficiency. The same happens with lbry, where it's even worst (less % gain in performance, similar efficiency loss) it's not a g1 gaming, but a palit
|
|
|
|
Nikolaj
|
|
March 05, 2017, 10:43:03 AM |
|
Otherwise, most everything Nikolaj is talking about doesn't really make sense. The crashing part when switching algos does though.
As always you've got the crystal ball. I've forgot it. Yeah, I haven't got experience with vga and kernels. Tested more than 500 vgas since 2006 and in the scene, on a daily basis, since early 2014. Good continuation with your (useless) chats @amph: sjs I suppose
|
|
|
|
Slava_K
|
|
March 05, 2017, 10:51:23 AM |
|
New coin. Pool on suprnova, new algo - sha256t - triripple Can _sp make ccminer for this, plz...
|
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
|
March 05, 2017, 01:18:57 PM |
|
The algo switching it's internal to the SpreadX11 algorithm (hashing functions). It's not about closing ccminer . In a multigpu environment, with an high number of models and versions, it's hard to find the highest stable clock (let's call it HSC), and this leads to the need of a proper testing, which is a bit complex given the absence of a pool in this case (due the peculiar decentralized mining process, one of the key elements of this amazing project). Spr it's very undervalued, the technology behind it it's one of the best concepts in the markets. I see. I never had cards crashing doing SpreadX11 with my 'HSC' though. Nor they ever boosted to 2000+ Mhz with a basic OC so I'm not sure what you mean. As much as I like SPR, it really is nothing extraordinary. Poolmining is possible for a very long time ( https://spr.suprnova.cc/) so there's that.
|
Not your keys, not your coins!
|
|
|
Amph
Legendary
Offline
Activity: 3248
Merit: 1070
|
|
March 05, 2017, 02:29:16 PM |
|
yeah but the pool mine is not modded with sp mod(you get far less hash), and it doesn't even work last time i've tried
|
|
|
|
giagge
Legendary
Offline
Activity: 1134
Merit: 1001
|
|
March 05, 2017, 02:30:58 PM |
|
Question :
I have gtx 1070 gigabyte 1 single 8 pin power connection . I use Afterburner for clock gpu and mem , and for set power limit to 50% for example .
Its possible set under 50% power limit ? With afterburner no .
|
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
March 05, 2017, 03:25:23 PM |
|
Question :
I have gtx 1070 gigabyte 1 single 8 pin power connection . I use Afterburner for clock gpu and mem , and for set power limit to 50% for example .
Its possible set under 50% power limit ? With afterburner no .
It's offtopic but:no; it is great that we can go to -50, already. And I don't know for any bios mods for it. What you want, work @ 10%?
|
|
|
|
jiggytom
Legendary
Offline
Activity: 1068
Merit: 1020
|
|
March 05, 2017, 03:29:31 PM |
|
are there any LBRY (LBC) miners (private or otherwise) that perform better than epsylon's public one?
|
BTC: 174MGp3R5prNbuen31Kx5G5XuyuAXu9jye LBC: bWYN8NXGKWsgEAd6tQnJ5YRo2Z4r6PjxBH
|
|
|
newmz
Sr. Member
Offline
Activity: 372
Merit: 250
The road of excess leads to the palace of wisdom
|
|
March 05, 2017, 03:41:52 PM |
|
Hey @sp_ - I tried downloading your LBRY sp_mod #5 https://github.com/sp-hash/ccminer/releases/tag/LBRYSP5 and I tried running it with my regular .bat file for the suprnova pool but it just starts up mining to lbrmine.zpool.ca, with I assume your own wallet address. So is this just a demo so you can sell an "unlocked" version for a "donation"? It only actually does a few percent better than the git-truvpot version I was already using anyway so meh. What is the point of "releasing" something locked to a certain pool or whatever? Do I have to know how to compile from source to add my own pool URL, username, password, etc?
|
Crypto currency enthusiast and miner since 2015. Mined approx 200 ETH during 2016 and 2017 and sold it at approximately $US40 each. Then I watched it reach $1000+ each. If anyone bothers to read this stuff pay attention to this: HODL HODL HODL HODL HODL HODL
I started mining with 1 AMD 7950 and 1 R9-280X. Then I gradually built my AMD operation into 12 R9-290s. Awesome ETH hash but ridiculous power consumption and heat. Over the last year I defected to the Nvidia team. I now use GTX 1070s. They were expensive to buy (probably a bargain now) but awesome hash rate vs. power consumption. blah blah blah blah
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2954
Merit: 1087
Team Black developer
|
|
March 05, 2017, 03:57:02 PM |
|
Hey @sp_ - I tried downloading your LBRY sp_mod #5 https://github.com/sp-hash/ccminer/releases/tag/LBRYSP5 and I tried running it with my regular .bat file for the suprnova pool but it just starts up mining to lbrmine.zpool.ca, with I assume your own wallet address. So is this just a demo so you can sell an "unlocked" version for a "donation"? It only actually does a few percent better than the git-truvpot version I was already using anyway so meh. What is the point of "releasing" something locked to a certain pool or whatever? Do I have to know how to compile from source to add my own pool URL, username, password, etc? 1.66% fee. 2 minutes for me 120 minutes for you.
|
|
|
|
bensam1231
Legendary
Offline
Activity: 1750
Merit: 1024
|
|
March 05, 2017, 04:08:34 PM |
|
Otherwise, most everything Nikolaj is talking about doesn't really make sense. The crashing part when switching algos does though.
As always you've got the crystal ball. I've forgot it. Yeah, I haven't got experience with vga and kernels. Tested more than 500 vgas since 2006 and in the scene, on a daily basis, since early 2014. Good continuation with your (useless) chats @amph: sjs I suppose I like to make shit up to perpetuate my name too! Guess whatever works for you... On the same page as Chryo. I don't suppose you got this idea last year about a month after the release of 1070s when I was talking about all the different models of 1070s I was working with to find the best one and made posts on here? Oh look, the date on your article in your profile is August 2, 2016... Weird... When were the 1070s released? June 10th... Hmmm... But, you know, I'm sure no one notices what goes on around here or correlations between activity. Here you go: https://bitcointalk.org/index.php?topic=826901.msg15696535#msg15696535Just to add flavor to the discussion, talking about the shit fans on the 1070 Gigabyte models. We can also talk about the shit Zotac models I pointed out with the absolutely terrible coolers that are now dying on people, the MSI cards that spontaneously exploded, or more recently the EVGA ones (which they've pretty much fixed).
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
March 05, 2017, 05:12:37 PM |
|
Hey @sp_ - I tried downloading your LBRY sp_mod #5 https://github.com/sp-hash/ccminer/releases/tag/LBRYSP5 and I tried running it with my regular .bat file for the suprnova pool but it just starts up mining to lbrmine.zpool.ca, with I assume your own wallet address. So is this just a demo so you can sell an "unlocked" version for a "donation"? It only actually does a few percent better than the git-truvpot version I was already using anyway so meh. What is the point of "releasing" something locked to a certain pool or whatever? Do I have to know how to compile from source to add my own pool URL, username, password, etc? sp_ lbry miner will always begin mining for sp_ then for you, on a cycle (2mn for him first, then 120mn for you, rince & repeat) so it will always begin by his fee, that's normal and to counter people that cut the miner out before fee is starting. (as saw on many occasions) You own mining isn't locked to any pools. It's free to use on any pools you wish.
|
|
|
|
jiggytom
Legendary
Offline
Activity: 1068
Merit: 1020
|
|
March 05, 2017, 08:19:39 PM Last edit: March 05, 2017, 09:56:07 PM by jiggytom |
|
Hey @sp_ - I tried downloading your LBRY sp_mod #5 https://github.com/sp-hash/ccminer/releases/tag/LBRYSP5 and I tried running it with my regular .bat file for the suprnova pool but it just starts up mining to lbrmine.zpool.ca, with I assume your own wallet address. So is this just a demo so you can sell an "unlocked" version for a "donation"? It only actually does a few percent better than the git-truvpot version I was already using anyway so meh. What is the point of "releasing" something locked to a certain pool or whatever? Do I have to know how to compile from source to add my own pool URL, username, password, etc? 1.66% fee. 2 minutes for me 120 minutes for you. Started using your miner, but I'm experiencing lots of low difficulty rejects, more than just running ver 1.8.3 of epsylon's miner. Ideas? And it just crashed on me while switching pools.
|
BTC: 174MGp3R5prNbuen31Kx5G5XuyuAXu9jye LBC: bWYN8NXGKWsgEAd6tQnJ5YRo2Z4r6PjxBH
|
|
|
giagge
Legendary
Offline
Activity: 1134
Merit: 1001
|
|
March 05, 2017, 10:05:40 PM |
|
Question :
I have gtx 1070 gigabyte 1 single 8 pin power connection . I use Afterburner for clock gpu and mem , and for set power limit to 50% for example .
Its possible set under 50% power limit ? With afterburner no .
It's offtopic but:no; it is great that we can go to -50, already. And I don't know for any bios mods for it. What you want, work @ 10%? 10% ? you are funny... very funny , no but 40% or 45% , i have 380 sol at 50% PL on zec , and good wattage at wall .
|
|
|
|
bensam1231
Legendary
Offline
Activity: 1750
Merit: 1024
|
|
March 06, 2017, 10:19:50 AM |
|
Question :
I have gtx 1070 gigabyte 1 single 8 pin power connection . I use Afterburner for clock gpu and mem , and for set power limit to 50% for example .
Its possible set under 50% power limit ? With afterburner no .
It's offtopic but:no; it is great that we can go to -50, already. And I don't know for any bios mods for it. What you want, work @ 10%? 10% ? you are funny... very funny , no but 40% or 45% , i have 380 sol at 50% PL on zec , and good wattage at wall . TDP depends entirely on the make and model of card. They limit to 50% as it can cause stalls. That's on a per GPU basis and it's hard coded into the GPU, just the same as voltage is.
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
giagge
Legendary
Offline
Activity: 1134
Merit: 1001
|
|
March 06, 2017, 12:42:05 PM |
|
New coin. Pool on suprnova, new algo - sha256t - triripple Can _sp make ccminer for this, plz... I dont find this , link ? .
|
|
|
|
|
bathrobehero
Legendary
Offline
Activity: 2002
Merit: 1051
ICO? Not even once.
|
|
March 06, 2017, 01:20:33 PM |
|
The default intensity in Spreadminer 10 is too high. A bunch of my rigs keep hard crashing sometimes (not always) if I start mining SPR.
|
Not your keys, not your coins!
|
|
|
joniosbra
Member
Offline
Activity: 83
Merit: 10
|
|
March 06, 2017, 01:42:51 PM |
|
The default intensity in Spreadminer 10 is too high. A bunch of my rigs keep hard crashing sometimes (not always) if I start mining SPR.
What miner u guys are using to mine spreadcoin? is there a tutorial to mine this coin? tks
|
|
|
|
|