Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
September 23, 2015, 05:42:56 PM |
|
The answer to "why" is poor hardward design by Bitmain. There's something screwy about the usb and power and how it's all done on the circuit board. I don't know enough to talk details, I'm only repeating the tl;dr of what a hardware guy told me after tearing into one.
|
|
|
|
navigatorus
|
|
September 23, 2015, 05:44:02 PM |
|
what else should I add in there to work simultaneously two antminer u3
If you read this thread you'll find that more people had problems running more than 1 U3 at the same time than could do so successfully. You may be in the majority where you can only have one U3 running at a time. It could be luck but I have 3 U3's running right now. They do zombie out sometimes but are fun to play with. To be fair it's not that they zombie out a ton, it's just that I don't notice it right away as I don't keep a eye on them as much as some might. what is a zombie?why u3 to become zombies?how to fix it? Unplug power and usb on miner, then plug back in. It should fix it. If that does not fix it try restarting cgminer (or what ever program your using) it's understandable.my question is,why u3 turns into a zombie?why is this and how can we avoid this??
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
September 23, 2015, 05:49:57 PM |
|
what else should I add in there to work simultaneously two antminer u3
If you read this thread you'll find that more people had problems running more than 1 U3 at the same time than could do so successfully. You may be in the majority where you can only have one U3 running at a time. It could be luck but I have 3 U3's running right now. They do zombie out sometimes but are fun to play with. To be fair it's not that they zombie out a ton, it's just that I don't notice it right away as I don't keep a eye on them as much as some might. what is a zombie?why u3 to become zombies?how to fix it? Unplug power and usb on miner, then plug back in. It should fix it. If that does not fix it try restarting cgminer (or what ever program your using) it's understandable.my question is,why u3 turns into a zombie?why is this and how can we avoid this?? There is not a definite anwser. Reading i have seen some say using some PSU's instead of those cords can help. Have seen some claim linux might help. At end of day though if it was know why it does it or it would be fixed. It is going to happpen you have to watch the U3's more then a lot of miners.
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
September 23, 2015, 06:21:34 PM |
|
it's understandable.my question is,why u3 turns into a zombie?why is this and how can we avoid this??
Look up one post above your reply.
|
|
|
|
navigatorus
|
|
September 23, 2015, 06:43:54 PM |
|
what else should I add in there to work simultaneously two antminer u3
If you read this thread you'll find that more people had problems running more than 1 U3 at the same time than could do so successfully. You may be in the majority where you can only have one U3 running at a time. It could be luck but I have 3 U3's running right now. They do zombie out sometimes but are fun to play with. To be fair it's not that they zombie out a ton, it's just that I don't notice it right away as I don't keep a eye on them as much as some might. what is a zombie?why u3 to become zombies?how to fix it? Unplug power and usb on miner, then plug back in. It should fix it. If that does not fix it try restarting cgminer (or what ever program your using) it's understandable.my question is,why u3 turns into a zombie?why is this and how can we avoid this?? There is not a definite anwser. Reading i have seen some say using some PSU's instead of those cords can help. Have seen some claim linux might help. At end of day though if it was know why it does it or it would be fixed. It is going to happpen you have to watch the U3's more then a lot of miners. I use an ATX PSU,and noticed that one miner was never the zombies,and the second periodically became zombies when I was able to connect,I noticed a bad power connector on the second miner and replaced.I think the point is the power of the miner. guys can anyone tell me good pool for mining??what settings frequency / voltage do you recommend for maximum performance u3.thank you.
|
|
|
|
zOU
|
|
October 01, 2015, 03:21:34 PM Last edit: October 01, 2015, 04:01:27 PM by zOU |
|
Hello, It looks like I have a lot of HW errors but not too many rejected though... cgminer options: --au3-freq 250 --au3-volt 800 But I have as much when running with no option (so default V and frequence) Each U3 has a 80mm fan blowing on the bottom plate, so temperature shouldn't be an issue... ? DEV Temp Frequency Dev HR Shares AC % AC RE % RE HW % HW Last share Last share time AU30 n.a. not available 59.70Gh/s 2115557717 215 11.74% 0 0.00% 1617 88.26% 33 secs ago Thu, 01 Oct 2015 15:56:29 GMT AU31 n.a. not available 62.36Gh/s 2329590253 244 94.57% 1 0.39% 13 5.04% 20 secs ago Thu, 01 Oct 2015 15:56:42 GMT AU32 n.a. not available 61.45Gh/s 2214198798 224 16.29% 1 0.07% 1150 83.64% 6 secs ago Thu, 01 Oct 2015 15:56:56 GMT
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
October 01, 2015, 04:02:15 PM |
|
Well from my experience the U3 sometimes just freaks out and gives you HW errors out the wazoo.
I fire one of mine up every now and then, and just recently I had one running fine for a few days at 785/237.5 for about 51GH/s. It would zombie out, like they do, but otherwise ran ok with HW error about 2%. Then, for no reason, yesterday it started going crazy on the HW error and no matter what settings I run it gives me 20% HW error. So I tried another U3 and get the same thing, so I unplugged them and put them away. When I get bored I'll try plugging one in again and maybe I'll get lucky and it'll run, or maybe not.
|
|
|
|
zOU
|
|
October 01, 2015, 04:37:43 PM |
|
Well, I power them off for 15mn at midnight and noon everyday to prevent them going zombie.
We'll see if there's any improvement.
Thx !
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
October 01, 2015, 04:43:55 PM |
|
Well from my experience the U3 sometimes just freaks out and gives you HW errors out the wazoo.
I fire one of mine up every now and then, and just recently I had one running fine for a few days at 785/237.5 for about 51GH/s. It would zombie out, like they do, but otherwise ran ok with HW error about 2%. Then, for no reason, yesterday it started going crazy on the HW error and no matter what settings I run it gives me 20% HW error. So I tried another U3 and get the same thing, so I unplugged them and put them away. When I get bored I'll try plugging one in again and maybe I'll get lucky and it'll run, or maybe not.
Mine is not horrible I have 3 U3's running. And it seems once a day I have a zombie. So it's a pain but as long as I'm home not a huge deal. If it was big maching and I was losing ton's of hash, this would be a lot bigger deal. But with me doing lotto mining for fun it's not really about ROI.
|
|
|
|
tolazy
|
|
October 02, 2015, 04:10:46 PM |
|
Hi.
is there a way to have cgminer not to include the U3 so i can run another cgminer just for that.. i have 3 U2's that i want to use for another pool then the U3
running linux
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
October 02, 2015, 04:43:05 PM |
|
Hi.
is there a way to have cgminer not to include the U3 so i can run another cgminer just for that.. i have 3 U2's that i want to use for another pool then the U3
running linux
Try including --usb :3 in the batch file for your U2s, then launch cgminer for the U2s. It should fire up and pick up the 3 U2, but with the --usb :3 it will only look for 3 devices total. Then start another instance of cgminer for the U3, it will see the U2s as "busy" and won't initialize them, but it will pick up the U3.
|
|
|
|
tolazy
|
|
October 02, 2015, 05:05:34 PM |
|
had to move around the usb a bit but it worked thanks Mikestang
U3 works with --usb 1 and the others start just fine in another cgminer
will probably change around the usb devices when i get my 10p hub so it places first och last
|
|
|
|
Mikestang
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
October 02, 2015, 06:14:29 PM |
|
U3 works with --usb 1
Glad it worked for you, I'm doing the same thing with several of my usb sticks and one U3. But check your syntax, per the readme the command should be don't forget the colon.
|
|
|
|
smit1237
Full Member
Offline
Activity: 182
Merit: 100
May the source be with you.
|
|
October 07, 2015, 02:57:12 PM |
|
if someone interested, here is the firmware for tp-link mr3020 with u3 support, no web ui, no router functionality, just system and cgminer 4.9.2 After flash, router will be on 192.168.1.1 ip, you must assign ip manually , then ssh to it with login root and no password, change ip address: vi /etc/config/network , press I to edit , edit settings to dhcp for example, config interface 'lan' option ifname 'eth0' option proto 'dhcp' them press esc then press : then type wq then enter. reboot router after that open cgminer start script, vi /etc/rc.local and adjust settings, to see what's happens type screen -r to detach from screen press ctrl+a+d That's it, if you found this firmware useful, consider donating to address in my signature. http://smit1237.asuscomm.com:8080/openwrt/tplink-mr3020/openwrt-ar71xx-generic-tl-mr3020-v1-squashfs-factory.bin
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
October 07, 2015, 03:24:24 PM |
|
if someone interested, here is the firmware for tp-link mr3020 with u3 support, no web ui, no router functionality, just system and cgminer 4.9.2 After flash, router will be on 192.168.1.1 ip, you must assign ip manually , then ssh to it with login root and no password, change ip address: vi /etc/config/network , press I to edit , edit settings to dhcp for example, config interface 'lan' option ifname 'eth0' option proto 'dhcp' them press esc then press : then type wq then enter. reboot router after that open cgminer start script, vi /etc/rc.local and adjust settings, to see what's happens type screen -r to detach from screen press ctrl+a+d That's it, if you found this firmware useful, consider donating to address in my signature. http://smit1237.asuscomm.com:8080/openwrt/tplink-mr3020/openwrt-ar71xx-generic-tl-mr3020-v1-squashfs-factory.binInteresting you have done what the Antrouter brags about, managing U3's. You even beat the antrouter out . I don't happen to have a extra tplink to test right now. How does it seem with zombies? Is it reduced from windows going to this? Thanks!
|
|
|
|
smit1237
Full Member
Offline
Activity: 182
Merit: 100
May the source be with you.
|
|
October 07, 2015, 03:53:20 PM |
|
Looks like everything was fine, no zombie seen for 12h, hashrate stable, btw this build also support rockminer and other devices suported by icarus driver Btw this build supports most of routers on ar71xx plaform, if you want some special router support , ask me in pm, if router had 8Mb flash it can also support full router functionality and webui.
|
|
|
|
.anto.
|
|
October 08, 2015, 04:14:52 AM |
|
if someone interested, here is the firmware for tp-link mr3020 with u3 support, no web ui, no router functionality, just system and cgminer 4.9.2
I am wondering why would someone wants to have a firmware on his/her router without router functionality. I have my TL-WDR3600 running fine as a router with a lot of functionalities including openvpn and also running either cgminer or bfgminer controlling 2 of myAntminer U3s. I initially used bfgminer 5.2.0 then switched to cgminer 4.9.2, but the Antminer U3s became more unstable and I cannot control the USB interface usage. So I switched back to bfgminer 5.3.0.
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
October 08, 2015, 04:41:03 AM |
|
if someone interested, here is the firmware for tp-link mr3020 with u3 support, no web ui, no router functionality, just system and cgminer 4.9.2
I am wondering why would someone wants to have a firmware on his/her router without router functionality. I have my TL-WDR3600 running fine as a router with a lot of functionalities including openvpn and also running either cgminer or bfgminer controlling 2 of myAntminer U3s. I initially used bfgminer 5.2.0 then switched to cgminer 4.9.2, but the Antminer U3s became more unstable and I cannot control the USB interface usage. So I switched back to bfgminer 5.3.0. It is because it makes a good controller. Avalon 4.1's and other Avalons have used it. It runs ddwrt with a special version with cgminer on theirs. I wish I had one to test this fimware but I currently don't have a tplink nano with the usb.
|
|
|
|
smit1237
Full Member
Offline
Activity: 182
Merit: 100
May the source be with you.
|
|
October 08, 2015, 07:42:02 AM |
|
if someone interested, here is the firmware for tp-link mr3020 with u3 support, no web ui, no router functionality, just system and cgminer 4.9.2
I am wondering why would someone wants to have a firmware on his/her router without router functionality. I have my TL-WDR3600 running fine as a router with a lot of functionalities including openvpn and also running either cgminer or bfgminer controlling 2 of myAntminer U3s. I initially used bfgminer 5.2.0 then switched to cgminer 4.9.2, but the Antminer U3s became more unstable and I cannot control the USB interface usage. So I switched back to bfgminer 5.3.0. Ok, if you can fit this stuff in 4mb flash i will eat my hat. And try to disable 5 ghz interface, it will maybe add more stability to USB interface. I made this firmware for myself, and shared with community, if you don't like , don't use. notlist3dIf you have some other routers supported by openwrt on ar71xx platform, i can build it for you, just let me know
|
|
|
|
.anto.
|
|
October 08, 2015, 09:13:45 AM |
|
Ok, if you can fit this stuff in 4mb flash i will eat my hat. And try to disable 5 ghz interface, it will maybe add more stability to USB interface. I made this firmware for myself, and shared with community, if you don't like , don't use.
Wooaahh... Hold your horse there! And you have to eat your hat as I (and a lot of other people) managed to stuff all the necessary OpenWRT packages into 2MB flash of ASUS WL-700GE which has internal storage with IDE interface. So 4MB flash is massive space especially if there are USB ports on the router where you can just plug in external storage.
|
|
|
|
|