Announcing ZiftrCOIN Release

[ocminer]

GPU miner will officially be released , but only with PiMP combination . For now...

It won't be just PiMP, though I see how our post is confusing.
http://www.reddit.com/r/ziftrCOIN/comments/2zeain/update_on_gpu_mining_ziftr_pool_and_qt_wallet/

We're planning on basically releasing everything we have. Our GPU mining isn't up to our satisfaction in performance OR usability, but we're going to release what we have so the tinkerers can tinker. The botnet was a huge distraction for us, so hopefully some GPUs can help stem that, but won't kill the value of the coin. Then we can focus development on things people want instead of battling botnets.

Can someone please explain what pimp mining is please ? thx

Its like a bootable image which you can install on a USB stick and boot a rig from.. it has all the necessary stuff on board to start mining on that rig via the USB stick

[myagui]

Can someone please explain what pimp mining is please ? thx

PiMP : Portable Instant Mining Platform
http://www.getpimp.org/

In short: It's a linux distro built with the sole purpose of mining.
It has some tweaks & tools for advanced management (pool settings, rig monitoring, etc).
Cheers!

[Eliovp]

get some HW error after a few day
I have try used many setting with -w -X gpuengne and memclock but still got HW error

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

sgminer.exe -k zr5 -o stratum+tcp://zrc-stratum.suprnova.cc:2257 -u ziftrcoin.1 -p x -w 256 -g 2 -X 1024 --gpu-powertune 20 --gpu-engine 1100 --gpu-memclock 1500 --lookup-gap 2

only use: sgminer.exe -k zr5 -o stratum+tcp://zrc-stratum.suprnova.cc:2257 -u ziftrcoin.1 -p x -w 256 -i 18

When i am home i will send u my .conf file, this because i dont put this information into the .bat file. atm i am at work till 22:00 gmt+1

trying with your setting but still get hw error, this happen after a day, before is no problem

and i think i'm not the only one

I'll crosspost here since I am getting no response in the mining forum:

Wolf0,

I am using the Ziftr miner on 6 different rigs.  These rigs all have AMD 14.6 or 14.7 installed so I put the 15.3b drivers in your miner folder.  After about 18 hours of running with no reboots (yea!) each rig has multiple hardware errors and it is ALWAYS and ONLY gpu 0.  Does that mean anything to you?

I am using Tahiti cards, 1050/1500, xI 1024, w 256, g 2

Please advise.

NB: running with x11 algo everytthing is normal
when running whirpoolx and zr5 algo with wolf mod shows hw error and unstable hash

now my PC looks something change everything running as administrator automatically >.<

Exactly the same over here, 2 Rigs, both 6 cards, both card 0 multiple hw errors.. Very strange indeed!

[StephenMorse]

Can someone please explain what pimp mining is please ? thx

PiMP : Portable Instant Mining Platform
http://www.getpimp.org/

In short: It's a linux distro built with the sole purpose of mining.
It has some tweaks & tools for advanced management (pool settings, rig monitoring, etc).
Cheers!

Right. PiMP just added support for ziftrCOIN, directions are here:

http://www.getpimp.org/community/blog/182-zrc-update.html

[Loneviking]

I get 3.2 Mhash ASUS R9 280X and 2 Mhash on GTX 960 and only 350 Khash on GTX 860

What miner is you using for the GTX 960? I only het 1,7 MH

Loneviking

[Loneviking]

I dont get the ccminer on ziftrpool to work. The other ccminer I have that works only gives me 1,7 MH on my GTX 960 card. On the same card and as it is clocked now I get 5,4 MH in x11... Anyone know any better ccminer to use?

LV

[zmija]

I get 3.2 Mhash ASUS R9 280X and 2 Mhash on GTX 960 and only 350 Khash on GTX 860

What miner is you using for the GTX 960? I only het 1,7 MH

Loneviking

the one from this site (the official one) http://ziftrpool.io/downloads. but i saw later on that is not constant hash rate it goes from 1 MH to 2 MH, still haven't figure out what this means (some number +/- some number)

[minerjoen]

get some HW error after a few day
I have try used many setting with -w -X gpuengne and memclock but still got HW error

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

sgminer.exe -k zr5 -o stratum+tcp://zrc-stratum.suprnova.cc:2257 -u ziftrcoin.1 -p x -w 256 -g 2 -X 1024 --gpu-powertune 20 --gpu-engine 1100 --gpu-memclock 1500 --lookup-gap 2

only use: sgminer.exe -k zr5 -o stratum+tcp://zrc-stratum.suprnova.cc:2257 -u ziftrcoin.1 -p x -w 256 -i 18

When i am home i will send u my .conf file, this because i dont put this information into the .bat file. atm i am at work till 22:00 gmt+1

I see that you also only have hardware errors with gpu0.  The mind boggles.  Surely an answer is forthcoming.

I'm home

This are my settings:

.bat file:
sgminer.exe --config sgminer.conf

sgminer.conf file:
{
"pools" : [
   {
      "url" : "stratum+tcp://zrc-stratum.suprnova.cc:2257",
      "user" : "minerjoen.gpu",
      "pass" : "1"
   }
]
,
"intensity" : "18",
"vector" : "2",
"worksize" : "256",
"kernel" : "zr5",
"thread-concurrency" : "13578",
"lookup-gap" : "2",
"gpu-threads" : "4"
}

[zmija]

get some HW error after a few day
I have try used many setting with -w -X gpuengne and memclock but still got HW error

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

sgminer.exe -k zr5 -o stratum+tcp://zrc-stratum.suprnova.cc:2257 -u ziftrcoin.1 -p x -w 256 -g 2 -X 1024 --gpu-powertune 20 --gpu-engine 1100 --gpu-memclock 1500 --lookup-gap 2

only use: sgminer.exe -k zr5 -o stratum+tcp://zrc-stratum.suprnova.cc:2257 -u ziftrcoin.1 -p x -w 256 -i 18

When i am home i will send u my .conf file, this because i dont put this information into the .bat file. atm i am at work till 22:00 gmt+1

I see that you also only have hardware errors with gpu0.  The mind boggles.  Surely an answer is forthcoming.

I'm home

This are my settings:

.bat file:
sgminer.exe --config sgminer.conf

sgminer.conf file:
{
"pools" : [
   {
      "url" : "stratum+tcp://zrc-stratum.suprnova.cc:2257",
      "user" : "minerjoen.gpu",
      "pass" : "1"
   }
]
,
"intensity" : "18",
"vector" : "2",
"worksize" : "256",
"kernel" : "zr5",
"thread-concurrency" : "13578",
"lookup-gap" : "2",
"gpu-threads" : "4"
}

which GPU u have?

[minerjoen]

get some HW error after a few day
I have try used many setting with -w -X gpuengne and memclock but still got HW error

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1

sgminer.exe -k zr5 -o stratum+tcp://zrc-stratum.suprnova.cc:2257 -u ziftrcoin.1 -p x -w 256 -g 2 -X 1024 --gpu-powertune 20 --gpu-engine 1100 --gpu-memclock 1500 --lookup-gap 2

only use: sgminer.exe -k zr5 -o stratum+tcp://zrc-stratum.suprnova.cc:2257 -u ziftrcoin.1 -p x -w 256 -i 18

When i am home i will send u my .conf file, this because i dont put this information into the .bat file. atm i am at work till 22:00 gmt+1

I see that you also only have hardware errors with gpu0.  The mind boggles.  Surely an answer is forthcoming.

I'm home

This are my settings:

.bat file:
sgminer.exe --config sgminer.conf

sgminer.conf file:
{
"pools" : [
   {
      "url" : "stratum+tcp://zrc-stratum.suprnova.cc:2257",
      "user" : "minerjoen.gpu",
      "pass" : "1"
   }
]
,
"intensity" : "18",
"vector" : "2",
"worksize" : "256",
"kernel" : "zr5",
"thread-concurrency" : "13578",
"lookup-gap" : "2",
"gpu-threads" : "4"
}

which GPU u have?

Did u tried it? (it wont destroy any card, settings from me are safe)

[djm34]

I get 3.2 Mhash ASUS R9 280X and 2 Mhash on GTX 960 and only 350 Khash on GTX 860

What miner is you using for the GTX 960? I only het 1,7 MH

Loneviking

the one from this site (the official one) http://ziftrpool.io/downloads. but i saw later on that is not constant hash rate it goes from 1 MH to 2 MH, still haven't figure out what this means (some number +/- some number)

mean +/- standard deviation (ie: average hashrate and the statistical error on that average, assuming the hashrate measurements follow a Gaussian distribution...)
==> this tell you how significant the quoted average is, as it defines a 67% confidence level interval, meaning that the "true" average has 67% change to be in the interval [average-error;average+error]. (a 95% confidence level interval would be [average-1.96*error;average+1.96*error])
Obviously this numbers takes time (ans statistics) to stabilize...

[tex81]

I'm home

This are my settings:

.bat file:
sgminer.exe --config sgminer.conf

sgminer.conf file:
{
"pools" : [
   {
      "url" : "stratum+tcp://zrc-stratum.suprnova.cc:2257",
      "user" : "minerjoen.gpu",
      "pass" : "1"
   }
]
,
"intensity" : "18",
"vector" : "2",
"worksize" : "256",
"kernel" : "zr5",
"thread-concurrency" : "13578",
"lookup-gap" : "2",
"gpu-threads" : "4"
}

"vector" : "2",
"thread-concurrency" : "13578",
"lookup-gap" : "2",

these are useless for non-scrypt algos.

[yudhistira]

still no update for windows miners 

[zmija]

I get 3.2 Mhash ASUS R9 280X and 2 Mhash on GTX 960 and only 350 Khash on GTX 860

What miner is you using for the GTX 960? I only het 1,7 MH

Loneviking

the one from this site (the official one) http://ziftrpool.io/downloads. but i saw later on that is not constant hash rate it goes from 1 MH to 2 MH, still haven't figure out what this means (some number +/- some number)

mean +/- standard deviation (ie: average hashrate and the statistical error on that average, assuming the hashrate measurements follow a Gaussian distribution...)
==> this tell you how significant the quoted average is, as it defines a 67% confidence level interval, meaning that the "true" average has 67% change to be in the interval [average-error;average+error]. (a 95% confidence level interval would be [average-1.96*error;average+1.96*error])
Obviously this numbers takes time (ans statistics) to stabilize...

thx

[z0n0]

I get 3.2 Mhash ASUS R9 280X and 2 Mhash on GTX 960 and only 350 Khash on GTX 860

What miner is you using for the GTX 960? I only het 1,7 MH

Loneviking

the one from this site (the official one) http://ziftrpool.io/downloads. but i saw later on that is not constant hash rate it goes from 1 MH to 2 MH, still haven't figure out what this means (some number +/- some number)

mean +/- standard deviation (ie: average hashrate and the statistical error on that average, assuming the hashrate measurements follow a Gaussian distribution...)
==> this tell you how significant the quoted average is, as it defines a 67% confidence level interval, meaning that the "true" average has 67% change to be in the interval [average-error;average+error]. (a 95% confidence level interval would be [average-1.96*error;average+1.96*error])
Obviously this numbers takes time (ans statistics) to stabilize...

thx

zmija, where r u from man?
zmija as snake?

[zmija]

I get 3.2 Mhash ASUS R9 280X and 2 Mhash on GTX 960 and only 350 Khash on GTX 860

What miner is you using for the GTX 960? I only het 1,7 MH

Loneviking

the one from this site (the official one) http://ziftrpool.io/downloads. but i saw later on that is not constant hash rate it goes from 1 MH to 2 MH, still haven't figure out what this means (some number +/- some number)

mean +/- standard deviation (ie: average hashrate and the statistical error on that average, assuming the hashrate measurements follow a Gaussian distribution...)
==> this tell you how significant the quoted average is, as it defines a 67% confidence level interval, meaning that the "true" average has 67% change to be in the interval [average-error;average+error]. (a 95% confidence level interval would be [average-1.96*error;average+1.96*error])
Obviously this numbers takes time (ans statistics) to stabilize...

thx

zmija, where r u from man?
zmija as snake?

u r correct zmija as snake, from EU

[z0n0]

I get 3.2 Mhash ASUS R9 280X and 2 Mhash on GTX 960 and only 350 Khash on GTX 860

What miner is you using for the GTX 960? I only het 1,7 MH

Loneviking

the one from this site (the official one) http://ziftrpool.io/downloads. but i saw later on that is not constant hash rate it goes from 1 MH to 2 MH, still haven't figure out what this means (some number +/- some number)

mean +/- standard deviation (ie: average hashrate and the statistical error on that average, assuming the hashrate measurements follow a Gaussian distribution...)
==> this tell you how significant the quoted average is, as it defines a 67% confidence level interval, meaning that the "true" average has 67% change to be in the interval [average-error;average+error]. (a 95% confidence level interval would be [average-1.96*error;average+1.96*error])
Obviously this numbers takes time (ans statistics) to stabilize...

thx

zmija, where r u from man?
zmija as snake?

u r correct zmija as snake, from EU

okej druže, okej

[zmija]

I get 3.2 Mhash ASUS R9 280X and 2 Mhash on GTX 960 and only 350 Khash on GTX 860

What miner is you using for the GTX 960? I only het 1,7 MH

Loneviking

the one from this site (the official one) http://ziftrpool.io/downloads. but i saw later on that is not constant hash rate it goes from 1 MH to 2 MH, still haven't figure out what this means (some number +/- some number)

mean +/- standard deviation (ie: average hashrate and the statistical error on that average, assuming the hashrate measurements follow a Gaussian distribution...)
==> this tell you how significant the quoted average is, as it defines a 67% confidence level interval, meaning that the "true" average has 67% change to be in the interval [average-error;average+error]. (a 95% confidence level interval would be [average-1.96*error;average+1.96*error])
Obviously this numbers takes time (ans statistics) to stabilize...

thx

zmija, where r u from man?
zmija as snake?

u r correct zmija as snake, from EU

okej druže, okej

odakle si ti?

[z0n0]

I get 3.2 Mhash ASUS R9 280X and 2 Mhash on GTX 960 and only 350 Khash on GTX 860

What miner is you using for the GTX 960? I only het 1,7 MH

Loneviking

the one from this site (the official one) http://ziftrpool.io/downloads. but i saw later on that is not constant hash rate it goes from 1 MH to 2 MH, still haven't figure out what this means (some number +/- some number)

mean +/- standard deviation (ie: average hashrate and the statistical error on that average, assuming the hashrate measurements follow a Gaussian distribution...)
==> this tell you how significant the quoted average is, as it defines a 67% confidence level interval, meaning that the "true" average has 67% change to be in the interval [average-error;average+error]. (a 95% confidence level interval would be [average-1.96*error;average+1.96*error])
Obviously this numbers takes time (ans statistics) to stabilize...

thx

zmija, where r u from man?
zmija as snake?

u r correct zmija as snake, from EU

okej druže, okej

odakle si ti?

eu prijatelju

[zmija]

I get 3.2 Mhash ASUS R9 280X and 2 Mhash on GTX 960 and only 350 Khash on GTX 860

What miner is you using for the GTX 960? I only het 1,7 MH

Loneviking

the one from this site (the official one) http://ziftrpool.io/downloads. but i saw later on that is not constant hash rate it goes from 1 MH to 2 MH, still haven't figure out what this means (some number +/- some number)

mean +/- standard deviation (ie: average hashrate and the statistical error on that average, assuming the hashrate measurements follow a Gaussian distribution...)
==> this tell you how significant the quoted average is, as it defines a 67% confidence level interval, meaning that the "true" average has 67% change to be in the interval [average-error;average+error]. (a 95% confidence level interval would be [average-1.96*error;average+1.96*error])
Obviously this numbers takes time (ans statistics) to stabilize...

thx

zmija, where r u from man?
zmija as snake?

u r correct zmija as snake, from EU

okej druže, okej

odakle si ti?

eu prijatelju

ima nas puno i ima nas svugdje  . znaš li šta je sa ovim zifterom ne ide nikamo?